teepeedee-0.3.0/0002777000175000017500000000000010006067603007204 5teepeedee-0.3.0/README0000664000175000017500000001552410006060067010004 QuickStart: ==== Once installed (./configure && make && make install) use the Python script teepeedee-share to share the current directory automatically with FTP and HTTP Description ==== teepeedee is a small, hopefully scalable, single-threaded file server. It can serve or receive multiple files over http, https and ftp simultaneously, listening on any number of ports and providing entirely different views of the filesystem to different users. It uses sendfile and is written in C++. teepeedee certainly used to run on FreeBSD i586 4.7-STABLE, Linux i686 2.4.20 with glibc 2.3, Debian i686 Woody (20021220), Debian PPC Unstable (20021220). You may like to increase the rlimit'd number of open file descriptors to allow teepeedee to have more connnections (in the Bourne shell, ulimit -n). It is a very untested at the moment. Please report problems to the author, John Fremlin ! Teepeedee can be found at http://john.fremlin.de/programs/teepeedee WARNING == Do not run with elevated privileges! While hypothetically there should be no problems with running teepeedee as root, you would have to be more nuts than raisins to do it. teepeedee does not check for symlinks. It is important that directories under users' home directories not be writable by untrusted agents as otherwise users could symlinkrace teepeedee and e.g. get it to overwrite any file owned by the teepeedee running user. Security == UPLOADED FILES ARE CREATED GROUP WRITABLE! teepeedee will only allow files or directories to be read that are world readable, and will only allow files or directories to be modified if they are owned by the teepeedee process's user and group, and are user and group writable. A file or directory's parents ARE NOT CHECKED FOR ACCESS PERMISSIONS. Signals == SIGTERM, SIGINT - cleanly shut teepeedee down SIGUSR1 - write out pending configuration information, and clear configuration cache Configuration == By default teepeedee takes /etc/teepeedee as its configuration root. You can change this with ./configure --enable-configdir=dir. If present the first command line argument given to teepeedee overrides the configuration root. Under the configuration root, there should be a number of lowercase directories named after protocols, e.g. "ftp" or "http". Inside them should be directories defining servers. For an example use the teepeedee-share program to create a base configuration. Root configuration structure == Under the main configuration directory each configurable item is stored in a single file so it is more a config tree than a config file. In the main configuration directory (by default compile time configured to /etc/teepeedee or first command line argument) there are directories defining server classes. These are the recognised server classes: http, https, ftp. Inside each server class directory there can be an unlimited number of server configuration directories. For example you could have a layout like this /etc/teepeedee/https/secret-server/ /etc/teepeedee/https/intranet-server/ /etc/teepeedee/ftp/downloads/ /etc/teepeedee/http/important-website/ Generic server configuration == All server configuration directories can contain the following files and directories. All files are optional unless marked (required). Some files are written to, these are marked (written). bind_port - (required) contains port number to listen on as an ASCII decimal (e.g. 8080) bind_addr - IP address to listen on, in dotted quad format (e.g. 127.0.0.1) timeout_prelogin - number of seconds of inactivity before closing the connection before the user is authenticated (logging in anonymously counts as authenticating) timeout_postlogin - number of seconds of inactivity before closing the connection after the user is authenticated timeout_xfer - number of seconds of inactivity before closing a file transfer or directory listing unauthenticated_connections - (written) the number of unauthenticated connections active unauthenticated_connections_max - maximum number of connections in a pre-authentication state users/ - Users directory (described below) SSL server configuration == To function an SSL server needs the following files public_cert - public certificate in PEM format private_key - private key in PEM format HTTP(S) server configuration == HTTP and HTTPS server directories can contain the following additional configuration items. See the information for generic SSL servers to set the keys for HTTPS. canonical_server_name - the official name of the server that will be used in HTTP redirections. For example, it could contain the line www.example.com realm - HTTP authentication realm. If the realm is "Private members area". Browsers will say, Enter username and password for "Private members area". default-user/ - User directory if the user supplies incorrect or no authentication (described below) FTP server configuration == If you specify keys (as described in the information for generic SSL servers) the FTP server will do AUTH TLS control connection encryption. If you want to allow anonymous logins, create users "ftp" and "anonymous" with any_password_ok. passive_port_min - lowest port that the server will listen on for passive connections passive_port_max - highest port that the server will listen on for passive connections greeting - multiline welcome banner no_passive_mode - if this file exists the server will refuse a request to enter passive mode (where the client connects to another port on the server for the data transfer) no_port_mode - if this file exists the server will refuse to enter active mode (where the server connects to a port on the client for the data transfer) Users directory == The users/ directory in each server's configuration contains a directory per user. The name of the directory is the username. User directories == Each user directory can contain the following files and directories homedir/ - root of the filesystem as visible to the user though symlinks will be followed password_plain - the user's password in plain text format password - the user's crypt(3)ed password any_password_ok - if this file exists the user may login without a password (HTTP) or with any password (FTP) logins - (written) contains the number of times the user is currently logged in, e.g. 10 logins_max - maximum number of times the user can be logged in, e.g. 5 upload_ratio - floating point number as an ASCII string, e.g. 5.00. For every byte uploaded, allows user to exceed the maximum downloaded bytes by this number of bytes. download_bytes - (written) number of bytes downloaded, e.g. 1023423 download_bytes_max - approximate maximum number of bytes a user may download (may be extended with if upload_ratio is set). 0 means unlimited upload_bytes - (written) number of bytes uploaded upload_bytes_max - approximate number of bytes a user may upload msg_welcome - this message will be displayed to the user after login teepeedee-0.3.0/configure.in0000664000175000017500000000433110006060067011427 dnl Process this file with autoconf to produce a configure script. AC_INIT(src/main.cc) AM_INIT_AUTOMAKE(teepeedee, 0.3.0) dnl Check for openssl modified from that by dnl Mark Ethan Trostler dnl 1.2 (last modified: 2003-01-28) dnl http://www.gnu.org/software/ac-archive/htmldoc/check_ssl.html AC_DEFUN([CHECK_SSL], [AC_MSG_CHECKING(if ssl is wanted) AC_ARG_WITH(ssl, [ --with-ssl enable ssl [will check /usr/local/ssl /usr/lib/ssl /usr/ssl /usr/pkg /usr/local /usr ] ], [ if test "x$withval" == xno; then AC_MSG_RESULT(no) openssl_dont_want=true else AC_MSG_RESULT(yes) openssl_search_dir="$withval" fi ],[ AC_MSG_RESULT(yes)]) if test "x$openssl_dont_want" != xtrue; then for dir in $openssl_search_dir /usr/local/ssl /usr/lib/ssl /usr/ssl /usr/pkg /usr/local /usr; do ssldir="$dir" if test -f "$dir/include/openssl/ssl.h"; then found_ssl="yes"; AC_DEFINE([HAVE_OPENSSL],1,[OpenSSL library present and to be used]) CPPFLAGS="$CPPFLAGS -I$ssldir/include" break; fi done if test x_$found_ssl != x_yes; then AC_MSG_ERROR(Cannot find ssl libraries) else printf "OpenSSL found in $ssldir\n"; LIBS="$LIBS -lssl -lcrypto"; LDFLAGS="$LDFLAGS -L$ssldir/lib"; HAVE_OPENSSL=yes fi AC_SUBST(HAVE_OPENSSL) fi ]) dnl AM_CONFIG_HEADER(config.h) dnl Checks for programs AC_PROG_CXX AC_PROG_RANLIB dnl System stuff AC_SYS_LARGEFILE dnl Checks for header files AC_CHECK_HEADERS([sys/sendfile.h sys/uio.h crypt.h]) dnl Check for functions AC_CHECK_DECLS([sendfile],,,[#ifdef HAVE_SYS_SENDFILE_H #include #endif #ifdef HAVE_SYS_UIO_H #include #include #include #endif]) AC_CHECK_FUNCS([sendfile readdir_r]) CHECK_SSL dnl Configure directory location AC_ARG_ENABLE([configdir], AC_HELP_STRING([--enable-configdir=dir],[default directory for configuration]), tpd_configdir="$enableval", tpd_configdir="/etc/${PACKAGE}" ) AC_DEFINE_UNQUOTED(TPD_CONFIGDIR,"`eval echo ${tpd_configdir}`",directory containing configuration files) dnl All done AC_OUTPUT(Makefile src/Makefile lib/Makefile )teepeedee-0.3.0/aclocal.m40000664000175000017500000010131410006067567010771 # generated automatically by aclocal 1.8.2 -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 # Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. # -*- Autoconf -*- # Copyright (C) 2002, 2003 Free Software Foundation, Inc. # Generated from amversion.in; do not edit by hand. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # AM_AUTOMAKE_VERSION(VERSION) # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.8"]) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION so it can be traced. # This function is AC_REQUIREd by AC_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], [AM_AUTOMAKE_VERSION([1.8.2])]) # AM_AUX_DIR_EXPAND # Copyright (C) 2001, 2003 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets # $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to # `$srcdir', `$srcdir/..', or `$srcdir/../..'. # # Of course, Automake must honor this variable whenever it calls a # tool from the auxiliary directory. The problem is that $srcdir (and # therefore $ac_aux_dir as well) can be either absolute or relative, # depending on how configure is run. This is pretty annoying, since # it makes $ac_aux_dir quite unusable in subdirectories: in the top # source directory, any form will work fine, but in subdirectories a # relative path needs to be adjusted first. # # $ac_aux_dir/missing # fails when called from a subdirectory if $ac_aux_dir is relative # $top_srcdir/$ac_aux_dir/missing # fails if $ac_aux_dir is absolute, # fails when called from a subdirectory in a VPATH build with # a relative $ac_aux_dir # # The reason of the latter failure is that $top_srcdir and $ac_aux_dir # are both prefixed by $srcdir. In an in-source build this is usually # harmless because $srcdir is `.', but things will broke when you # start a VPATH build or use an absolute $srcdir. # # So we could use something similar to $top_srcdir/$ac_aux_dir/missing, # iff we strip the leading $srcdir from $ac_aux_dir. That would be: # am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` # and then we would define $MISSING as # MISSING="\${SHELL} $am_aux_dir/missing" # This will work as long as MISSING is not called from configure, because # unfortunately $(top_srcdir) has no meaning in configure. # However there are other variables, like CC, which are often used in # configure, and could therefore not use this "fixed" $ac_aux_dir. # # Another solution, used here, is to always expand $ac_aux_dir to an # absolute PATH. The drawback is that using absolute paths prevent a # configured tree to be moved without reconfiguration. AC_DEFUN([AM_AUX_DIR_EXPAND], [dnl Rely on autoconf to set up CDPATH properly. AC_PREREQ([2.50])dnl # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` ]) # AM_CONDITIONAL -*- Autoconf -*- # Copyright (C) 1997, 2000, 2001, 2003 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # serial 6 # AM_CONDITIONAL(NAME, SHELL-CONDITION) # ------------------------------------- # Define a conditional. AC_DEFUN([AM_CONDITIONAL], [AC_PREREQ(2.52)dnl ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl AC_SUBST([$1_TRUE]) AC_SUBST([$1_FALSE]) if $2; then $1_TRUE= $1_FALSE='#' else $1_TRUE='#' $1_FALSE= fi AC_CONFIG_COMMANDS_PRE( [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then AC_MSG_ERROR([conditional "$1" was never defined. Usually this means the macro was only invoked conditionally.]) fi])]) # serial 6 -*- Autoconf -*- # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 # Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be # written in clear, in which case automake, when reading aclocal.m4, # will think it sees a *use*, and therefore will trigger all it's # C support machinery. Also note that it means that autoscan, seeing # CC etc. in the Makefile, will ask for an AC_PROG_CC use... # _AM_DEPENDENCIES(NAME) # ---------------------- # See how the compiler implements dependency checking. # NAME is "CC", "CXX", "GCJ", or "OBJC". # We try a few techniques and use that to set a single cache variable. # # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was # modified to invoke _AM_DEPENDENCIES(CC); we would have a circular # dependency, and given that the user is not expected to run this macro, # just rely on AC_PROG_CC. AC_DEFUN([_AM_DEPENDENCIES], [AC_REQUIRE([AM_SET_DEPDIR])dnl AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl AC_REQUIRE([AM_MAKE_INCLUDE])dnl AC_REQUIRE([AM_DEP_TRACK])dnl ifelse([$1], CC, [depcc="$CC" am_compiler_list=], [$1], CXX, [depcc="$CXX" am_compiler_list=], [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], [depcc="$$1" am_compiler_list=]) AC_CACHE_CHECK([dependency style of $depcc], [am_cv_$1_dependencies_compiler_type], [if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_$1_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` fi for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c : > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf case $depmode in nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; none) break ;; esac # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. if depmode=$depmode \ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # (even with -Werror). So we grep stderr for any message # that says an option was ignored. if grep 'ignoring option' conftest.err >/dev/null 2>&1; then :; else am_cv_$1_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_$1_dependencies_compiler_type=none fi ]) AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) AM_CONDITIONAL([am__fastdep$1], [ test "x$enable_dependency_tracking" != xno \ && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) ]) # AM_SET_DEPDIR # ------------- # Choose a directory name for dependency files. # This macro is AC_REQUIREd in _AM_DEPENDENCIES AC_DEFUN([AM_SET_DEPDIR], [AC_REQUIRE([AM_SET_LEADING_DOT])dnl AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl ]) # AM_DEP_TRACK # ------------ AC_DEFUN([AM_DEP_TRACK], [AC_ARG_ENABLE(dependency-tracking, [ --disable-dependency-tracking speeds up one-time build --enable-dependency-tracking do not reject slow dependency extractors]) if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' fi AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) AC_SUBST([AMDEPBACKSLASH]) ]) # Generate code to set up dependency tracking. -*- Autoconf -*- # Copyright (C) 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. #serial 2 # _AM_OUTPUT_DEPENDENCY_COMMANDS # ------------------------------ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], [for mf in $CONFIG_FILES; do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named `Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # So let's grep whole file. if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then dirpart=`AS_DIRNAME("$mf")` else continue fi grep '^DEP_FILES *= *[[^ @%:@]]' < "$mf" > /dev/null || continue # Extract the definition of DEP_FILES from the Makefile without # running `make'. DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"` test -z "$DEPDIR" && continue # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n -e '/^U = / s///p' < "$mf"` test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" # We invoke sed twice because it is the simplest approach to # changing $(DEPDIR) to its actual value in the expansion. for file in `sed -n -e ' /^DEP_FILES = .*\\\\$/ { s/^DEP_FILES = // :loop s/\\\\$// p n /\\\\$/ b loop p } /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`AS_DIRNAME(["$file"])` AS_MKDIR_P([$dirpart/$fdir]) # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done ])# _AM_OUTPUT_DEPENDENCY_COMMANDS # AM_OUTPUT_DEPENDENCY_COMMANDS # ----------------------------- # This macro should only be invoked once -- use via AC_REQUIRE. # # This code is only required when automatic dependency tracking # is enabled. FIXME. This creates each `.P' file that we will # need in order to bootstrap the dependency handling code. AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles], [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) ]) # Do all the work for Automake. -*- Autoconf -*- # This macro actually does too much some checks are only needed if # your package does certain things. But this isn't really a big deal. # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 # Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # serial 11 # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) # AM_INIT_AUTOMAKE([OPTIONS]) # ----------------------------------------------- # The call with PACKAGE and VERSION arguments is the old style # call (pre autoconf-2.50), which is being phased out. PACKAGE # and VERSION should now be passed to AC_INIT and removed from # the call to AM_INIT_AUTOMAKE. # We support both call styles for the transition. After # the next Automake release, Autoconf can make the AC_INIT # arguments mandatory, and then we can depend on a new Autoconf # release and drop the old call support. AC_DEFUN([AM_INIT_AUTOMAKE], [AC_PREREQ([2.58])dnl dnl Autoconf wants to disallow AM_ names. We explicitly allow dnl the ones we care about. m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl AC_REQUIRE([AC_PROG_INSTALL])dnl # test to see if srcdir already configured if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi AC_SUBST([CYGPATH_W]) # Define the identity of the package. dnl Distinguish between old-style and new-style calls. m4_ifval([$2], [m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl AC_SUBST([PACKAGE], [$1])dnl AC_SUBST([VERSION], [$2])], [_AM_SET_OPTIONS([$1])dnl AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl _AM_IF_OPTION([no-define],, [AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl # Some tools Automake needs. AC_REQUIRE([AM_SANITY_CHECK])dnl AC_REQUIRE([AC_ARG_PROGRAM])dnl AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) AM_MISSING_PROG(AUTOCONF, autoconf) AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) AM_MISSING_PROG(AUTOHEADER, autoheader) AM_MISSING_PROG(MAKEINFO, makeinfo) AM_MISSING_PROG(AMTAR, tar) AM_PROG_INSTALL_SH AM_PROG_INSTALL_STRIP AC_REQUIRE([AM_PROG_MKDIR_P])dnl # We need awk for the "check" target. The system "awk" is bad on # some platforms. AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], [_AM_DEPENDENCIES(CC)], [define([AC_PROG_CC], defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl AC_PROVIDE_IFELSE([AC_PROG_CXX], [_AM_DEPENDENCIES(CXX)], [define([AC_PROG_CXX], defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl ]) ]) # When config.status generates a header, we must update the stamp-h file. # This file resides in the same directory as the config header # that is generated. The stamp files are numbered to have different names. # Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the # loop where config.status creates the headers, so we can generate # our stamp files there. AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], [# Compute $1's index in $config_headers. _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $1 | $1:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count]) # AM_PROG_INSTALL_SH # ------------------ # Define $install_sh. # Copyright (C) 2001, 2003 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl install_sh=${install_sh-"$am_aux_dir/install-sh"} AC_SUBST(install_sh)]) # -*- Autoconf -*- # Copyright (C) 2003 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # serial 1 # Check whether the underlying file-system supports filenames # with a leading dot. For instance MS-DOS doesn't. AC_DEFUN([AM_SET_LEADING_DOT], [rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null AC_SUBST([am__leading_dot])]) # Check to see how 'make' treats includes. -*- Autoconf -*- # Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # serial 2 # AM_MAKE_INCLUDE() # ----------------- # Check to see how make treats includes. AC_DEFUN([AM_MAKE_INCLUDE], [am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo done .PHONY: am__doit END # If we don't find an include directive, just comment out the code. AC_MSG_CHECKING([for style of include used by $am_make]) am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # We grep out `Entering directory' and `Leaving directory' # messages which can occur if `w' ends up in MAKEFLAGS. # In particular we don't look at `^make:' because GNU make might # be invoked under some other name (usually "gmake"), in which # case it prints its new name instead of `make'. if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then am__include=include am__quote= _am_result=GNU fi # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then am__include=.include am__quote="\"" _am_result=BSD fi fi AC_SUBST([am__include]) AC_SUBST([am__quote]) AC_MSG_RESULT([$_am_result]) rm -f confinc confmf ]) # -*- Autoconf -*- # Copyright (C) 1997, 1999, 2000, 2001, 2003 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # serial 3 # AM_MISSING_PROG(NAME, PROGRAM) # ------------------------------ AC_DEFUN([AM_MISSING_PROG], [AC_REQUIRE([AM_MISSING_HAS_RUN]) $1=${$1-"${am_missing_run}$2"} AC_SUBST($1)]) # AM_MISSING_HAS_RUN # ------------------ # Define MISSING if not defined so far and test if it supports --run. # If it does, set am_missing_run to use it, otherwise, to nothing. AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " else am_missing_run= AC_MSG_WARN([`missing' script is too old or missing]) fi ]) # AM_PROG_MKDIR_P # --------------- # Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise. # Copyright (C) 2003, 2004 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories # created by `make install' are always world readable, even if the # installer happens to have an overly restrictive umask (e.g. 077). # This was a mistake. There are at least two reasons why we must not # use `-m 0755': # - it causes special bits like SGID to be ignored, # - it may be too restrictive (some setups expect 775 directories). # # Do not use -m 0755 and let people choose whatever they expect by # setting umask. AC_DEFUN([AM_PROG_MKDIR_P], [if mkdir -p -- . 2>/dev/null; then # Keeping the `.' argument allows $(mkdir_p) to be used without # argument. Indeed, we sometimes output rules like # $(mkdir_p) $(somedir) # where $(somedir) is conditionally defined. # (`test -n '$(somedir)' && $(mkdir_p) $(somedir)' is a more # expensive solution, as it forces Make to start a sub-shell.) mkdir_p='mkdir -p -- .' else # On NextStep and OpenStep, the `mkdir' command does not # recognize any option. It will interpret all options as # directories to create, and then abort because `.' already # exists. for d in ./-p ./--; do test -d $d && rmdir $d done # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. if test -f "$ac_aux_dir/mkinstalldirs"; then mkdir_p='$(mkinstalldirs)' else mkdir_p='$(install_sh) -d' fi fi AC_SUBST([mkdir_p])]) # Helper functions for option handling. -*- Autoconf -*- # Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # serial 2 # _AM_MANGLE_OPTION(NAME) # ----------------------- AC_DEFUN([_AM_MANGLE_OPTION], [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) # _AM_SET_OPTION(NAME) # ------------------------------ # Set option NAME. Presently that only means defining a flag for this option. AC_DEFUN([_AM_SET_OPTION], [m4_define(_AM_MANGLE_OPTION([$1]), 1)]) # _AM_SET_OPTIONS(OPTIONS) # ---------------------------------- # OPTIONS is a space-separated list of Automake options. AC_DEFUN([_AM_SET_OPTIONS], [AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) # ------------------------------------------- # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) # # Check to make sure that the build environment is sane. # # Copyright (C) 1996, 1997, 2000, 2001, 2003 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # serial 3 # AM_SANITY_CHECK # --------------- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Just in case sleep 1 echo timestamp > conftest.file # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` if test "$[*]" = "X"; then # -L didn't work. set X `ls -t $srcdir/configure conftest.file` fi rm -f conftest.file if test "$[*]" != "X $srcdir/configure conftest.file" \ && test "$[*]" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken alias in your environment]) fi test "$[2]" = conftest.file ) then # Ok. : else AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi AC_MSG_RESULT(yes)]) # AM_PROG_INSTALL_STRIP # Copyright (C) 2001, 2003 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # One issue with vendor `install' (even GNU) is that you can't # specify the program used to strip binaries. This is especially # annoying in cross-compiling environments, where the build's strip # is unlikely to handle the host's binaries. # Fortunately install-sh will honor a STRIPPROG variable, so we # always use install-sh in `make install-strip', and initialize # STRIPPROG with the value of the STRIP variable (set by the user). AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl # Installed binaries are usually stripped using `strip' when the user # run `make install-strip'. However `strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the `STRIP' environment variable to overrule this program. dnl Don't test for $cross_compiling = yes, because it might be `maybe'. if test "$cross_compiling" != no; then AC_CHECK_TOOL([STRIP], [strip], :) fi INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) teepeedee-0.3.0/Makefile.am0000664000175000017500000000006510006067176011162 SUBDIRS = lib \ src EXTRA_DIST = bootstrap \ TODO teepeedee-0.3.0/Makefile.in0000664000175000017500000004161710006067573011204 # Makefile.in generated by automake 1.8.2 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = . am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : subdir = . DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in $(top_srcdir)/configure AUTHORS COPYING \ ChangeLog INSTALL NEWS TODO depcomp install-sh missing ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno configure.status.lineno mkinstalldirs = $(mkdir_p) CONFIG_CLEAN_FILES = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-exec-recursive install-info-recursive \ install-recursive installcheck-recursive installdirs-recursive \ pdf-recursive ps-recursive uninstall-info-recursive \ uninstall-recursive ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ { test ! -d $(distdir) \ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -fr $(distdir); }; } DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best distuninstallcheck_listfiles = find . -type f -print distcleancheck_listfiles = find . -type f -print ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ HAVE_OPENSSL = @HAVE_OPENSSL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_RANLIB = @ac_ct_RANLIB@ ac_ct_STRIP = @ac_ct_STRIP@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ bindir = @bindir@ build_alias = @build_alias@ datadir = @datadir@ exec_prefix = @exec_prefix@ host_alias = @host_alias@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ prefix = @prefix@ program_transform_name = @program_transform_name@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ SUBDIRS = lib \ src EXTRA_DIST = bootstrap \ TODO all: all-recursive .SUFFIXES: am--refresh: @: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \ cd $(srcdir) && $(AUTOMAKE) --gnu \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --gnu Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: $(am__configure_deps) cd $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) uninstall-info-am: # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @set fnord $$MAKEFLAGS; amf=$$2; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" mostlyclean-recursive clean-recursive distclean-recursive \ maintainer-clean-recursive: @set fnord $$MAKEFLAGS; amf=$$2; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ if (etags --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ else \ include_option=--include; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -f $$subdir/TAGS && \ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(ETAGS_ARGS)$$tags$$unique" \ || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) $(am__remove_distdir) mkdir $(distdir) @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkdir_p) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || mkdir "$(distdir)/$$subdir" \ || exit 1; \ (cd $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="../$(top_distdir)" \ distdir="../$(distdir)/$$subdir" \ distdir) \ || exit 1; \ fi; \ done -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r $(distdir) dist-gzip: distdir $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) dist-bzip2: distdir $(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) dist-tarZ: distdir $(AMTAR) chof - $(distdir) | compress -c >$(distdir).tar.Z $(am__remove_distdir) dist-shar: distdir shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz $(am__remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__remove_distdir) dist dist-all: distdir $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - ;;\ *.tar.bz2*) \ bunzip2 -c $(distdir).tar.bz2 | $(AMTAR) xf - ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(AMTAR) xf - ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac chmod -R a-w $(distdir); chmod a+w $(distdir) mkdir $(distdir)/_build mkdir $(distdir)/_inst chmod a-w $(distdir) dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && cd $(distdir)/_build \ && ../configure --srcdir=.. --prefix="$$dc_install_base" \ $(DISTCHECK_CONFIGURE_FLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && $(mkdir_p) "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck $(am__remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}' distuninstallcheck: @cd $(distuninstallcheck_dir) \ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: check-recursive all-am: Makefile installdirs: installdirs-recursive installdirs-am: install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic mostlyclean-am distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -f Makefile distclean-am: clean-am distclean-generic distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive info: info-recursive info-am: install-data-am: install-exec-am: install-info: install-info-recursive install-man: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-info-am uninstall-info: uninstall-info-recursive .PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \ check-am clean clean-generic clean-recursive ctags \ ctags-recursive dist dist-all dist-bzip2 dist-gzip dist-shar \ dist-tarZ dist-zip distcheck distclean distclean-generic \ distclean-recursive distclean-tags distcleancheck distdir \ distuninstallcheck dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-exec \ install-exec-am install-info install-info-am install-man \ install-strip installcheck installcheck-am installdirs \ installdirs-am maintainer-clean maintainer-clean-generic \ maintainer-clean-recursive mostlyclean mostlyclean-generic \ mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \ uninstall uninstall-am uninstall-info-am # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: teepeedee-0.3.0/configure0000775000175000017500000052262210006067575011050 #! /bin/sh # Guess values for system-dependent variables and create Makefiles. # Generated by GNU Autoconf 2.59. # # Copyright (C) 2003 Free Software Foundation, Inc. # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## # Be Bourne compatible if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then set -o posix fi DUALCASE=1; export DUALCASE # for MKS sh # Support unset when possible. if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then as_unset=unset else as_unset=false fi # Work around bugs in pre-3.0 UWIN ksh. $as_unset ENV MAIL MAILPATH PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. for as_var in \ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ LC_TELEPHONE LC_TIME do if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then eval $as_var=C; export $as_var else $as_unset $as_var fi done # Required to use basename. if expr a : '\(a\)' >/dev/null 2>&1; then as_expr=expr else as_expr=false fi if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi # Name of the executable. as_me=`$as_basename "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)$' \| \ . : '\(.\)' 2>/dev/null || echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } /^X\/\(\/\/\)$/{ s//\1/; q; } /^X\/\(\/\).*/{ s//\1/; q; } s/.*/./; q'` # PATH needs CR, and LINENO needs CR and PATH. # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then echo "#! /bin/sh" >conf$$.sh echo "exit 0" >>conf$$.sh chmod +x conf$$.sh if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi rm -f conf$$.sh fi as_lineno_1=$LINENO as_lineno_2=$LINENO as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && test "x$as_lineno_3" = "x$as_lineno_2" || { # Find who we are. Look in the path if we contain no path at all # relative or not. case $0 in *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 { (exit 1); exit 1; }; } fi case $CONFIG_SHELL in '') as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for as_base in sh bash ksh sh5; do case $as_dir in /*) if ("$as_dir/$as_base" -c ' as_lineno_1=$LINENO as_lineno_2=$LINENO as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } CONFIG_SHELL=$as_dir/$as_base export CONFIG_SHELL exec "$CONFIG_SHELL" "$0" ${1+"$@"} fi;; esac done done ;; esac # Create $as_me.lineno as a copy of $as_myself, but with $LINENO # uniformly replaced by the line number. The first 'sed' inserts a # line-number line before each line; the second 'sed' does the real # work. The second script uses 'N' to pair each line-number line # with the numbered line, and appends trailing '-' during # substitution so that $LINENO is not a special case at line end. # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) sed '=' <$as_myself | sed ' N s,$,-, : loop s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, t loop s,-$,, s,^['$as_cr_digits']*\n,, ' >$as_me.lineno && chmod +x $as_me.lineno || { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 { (exit 1); exit 1; }; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensible to this). . ./$as_me.lineno # Exit status is that of the last command. exit } case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in *c*,-n*) ECHO_N= ECHO_C=' ' ECHO_T=' ' ;; *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; *) ECHO_N= ECHO_C='\c' ECHO_T= ;; esac if expr a : '\(a\)' >/dev/null 2>&1; then as_expr=expr else as_expr=false fi rm -f conf$$ conf$$.exe conf$$.file echo >conf$$.file if ln -s conf$$.file conf$$ 2>/dev/null; then # We could just check for DJGPP; but this test a) works b) is more generic # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). if test -f conf$$.exe; then # Don't use ln at all; we don't have any links as_ln_s='cp -p' else as_ln_s='ln -s' fi elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.file if mkdir -p . 2>/dev/null; then as_mkdir_p=: else test -d ./-p && rmdir ./-p as_mkdir_p=false fi as_executable_p="test -f" # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" # IFS # We need space, tab and new line, in precisely that order. as_nl=' ' IFS=" $as_nl" # CDPATH. $as_unset CDPATH # Name of the host. # hostname on some systems (SVR3.2, Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` exec 6>&1 # # Initializations. # ac_default_prefix=/usr/local ac_config_libobj_dir=. cross_compiling=no subdirs= MFLAGS= MAKEFLAGS= SHELL=${CONFIG_SHELL-/bin/sh} # Maximum number of lines to put in a shell here document. # This variable seems obsolete. It should probably be removed, and # only ac_max_sed_lines should be used. : ${ac_max_here_lines=38} # Identity of this package. PACKAGE_NAME= PACKAGE_TARNAME= PACKAGE_VERSION= PACKAGE_STRING= PACKAGE_BUGREPORT= ac_unique_file="src/main.cc" # Factoring default headers for most tests. ac_includes_default="\ #include #if HAVE_SYS_TYPES_H # include #endif #if HAVE_SYS_STAT_H # include #endif #if STDC_HEADERS # include # include #else # if HAVE_STDLIB_H # include # endif #endif #if HAVE_STRING_H # if !STDC_HEADERS && HAVE_MEMORY_H # include # endif # include #endif #if HAVE_STRINGS_H # include #endif #if HAVE_INTTYPES_H # include #else # if HAVE_STDINT_H # include # endif #endif #if HAVE_UNISTD_H # include #endif" ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO AMTAR install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot CXX CXXFLAGS LDFLAGS CPPFLAGS ac_ct_CXX EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE RANLIB ac_ct_RANLIB CC CFLAGS ac_ct_CC CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE CPP EGREP HAVE_OPENSSL LIBOBJS LTLIBOBJS' ac_subst_files='' # Initialize some variables set by options. ac_init_help= ac_init_version=false # The variables have the same names as the options, with # dashes changed to underlines. cache_file=/dev/null exec_prefix=NONE no_create= no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= srcdir= verbose= x_includes=NONE x_libraries=NONE # Installation directory options. # These are left unexpanded so users can "make install exec_prefix=/foo" # and all the variables that are supposed to be based on exec_prefix # by default will actually change. # Use braces instead of parens because sh, perl, etc. also accept them. bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datadir='${prefix}/share' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' libdir='${exec_prefix}/lib' includedir='${prefix}/include' oldincludedir='/usr/include' infodir='${prefix}/info' mandir='${prefix}/man' ac_prev= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval "$ac_prev=\$ac_option" ac_prev= continue fi ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` # Accept the important Cygnus configure options, so we can diagnose typos. case $ac_option in -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) bindir=$ac_optarg ;; -build | --build | --buil | --bui | --bu) ac_prev=build_alias ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build_alias=$ac_optarg ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file=$ac_optarg ;; --config-cache | -C) cache_file=config.cache ;; -datadir | --datadir | --datadi | --datad | --data | --dat | --da) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ | --da=*) datadir=$ac_optarg ;; -disable-* | --disable-*) ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid feature name: $ac_feature" >&2 { (exit 1); exit 1; }; } ac_feature=`echo $ac_feature | sed 's/-/_/g'` eval "enable_$ac_feature=no" ;; -enable-* | --enable-*) ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid feature name: $ac_feature" >&2 { (exit 1); exit 1; }; } ac_feature=`echo $ac_feature | sed 's/-/_/g'` case $ac_option in *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; *) ac_optarg=yes ;; esac eval "enable_$ac_feature='$ac_optarg'" ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix=$ac_optarg ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he | -h) ac_init_help=long ;; -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) ac_init_help=recursive ;; -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) ac_init_help=short ;; -host | --host | --hos | --ho) ac_prev=host_alias ;; -host=* | --host=* | --hos=* | --ho=*) host_alias=$ac_optarg ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) includedir=$ac_optarg ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) infodir=$ac_optarg ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) libdir=$ac_optarg ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) libexecdir=$ac_optarg ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst \ | --locals | --local | --loca | --loc | --lo) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* \ | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir=$ac_optarg ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c | -n) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) oldincludedir=$ac_optarg ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix=$ac_optarg ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) program_prefix=$ac_optarg ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) program_suffix=$ac_optarg ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ | --program-transfo | --program-transf \ | --program-trans | --program-tran \ | --progr-tra | --program-tr | --program-t) ac_prev=program_transform_name ;; -program-transform-name=* | --program-transform-name=* \ | --program-transform-nam=* | --program-transform-na=* \ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name=$ac_optarg ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir=$ac_optarg ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) sharedstatedir=$ac_optarg ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site=$ac_optarg ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir=$ac_optarg ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir=$ac_optarg ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target_alias ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target_alias=$ac_optarg ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers | -V) ac_init_version=: ;; -with-* | --with-*) ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid package name: $ac_package" >&2 { (exit 1); exit 1; }; } ac_package=`echo $ac_package| sed 's/-/_/g'` case $ac_option in *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; *) ac_optarg=yes ;; esac eval "with_$ac_package='$ac_optarg'" ;; -without-* | --without-*) ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid package name: $ac_package" >&2 { (exit 1); exit 1; }; } ac_package=`echo $ac_package | sed 's/-/_/g'` eval "with_$ac_package=no" ;; --x) # Obsolete; use --with-x. with_x=yes ;; -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) x_includes=$ac_optarg ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; -*) { echo "$as_me: error: unrecognized option: $ac_option Try \`$0 --help' for more information." >&2 { (exit 1); exit 1; }; } ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 { (exit 1); exit 1; }; } ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` eval "$ac_envvar='$ac_optarg'" export $ac_envvar ;; *) # FIXME: should be removed in autoconf 3.0. echo "$as_me: WARNING: you should use --build, --host, --target" >&2 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && echo "$as_me: WARNING: invalid host type: $ac_option" >&2 : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} ;; esac done if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` { echo "$as_me: error: missing argument to $ac_option" >&2 { (exit 1); exit 1; }; } fi # Be sure to have absolute paths. for ac_var in exec_prefix prefix do eval ac_val=$`echo $ac_var` case $ac_val in [\\/$]* | ?:[\\/]* | NONE | '' ) ;; *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 { (exit 1); exit 1; }; };; esac done # Be sure to have absolute paths. for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ localstatedir libdir includedir oldincludedir infodir mandir do eval ac_val=$`echo $ac_var` case $ac_val in [\\/$]* | ?:[\\/]* ) ;; *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 { (exit 1); exit 1; }; };; esac done # There might be people who depend on the old broken behavior: `$host' # used to hold the argument of --host etc. # FIXME: To remove some day. build=$build_alias host=$host_alias target=$target_alias # FIXME: To remove some day. if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used." >&2 elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi fi ac_tool_prefix= test -n "$host_alias" && ac_tool_prefix=$host_alias- test "$silent" = yes && exec 6>/dev/null # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then its parent. ac_confdir=`(dirname "$0") 2>/dev/null || $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$0" : 'X\(//\)[^/]' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$0" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` srcdir=$ac_confdir if test ! -r $srcdir/$ac_unique_file; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r $srcdir/$ac_unique_file; then if test "$ac_srcdir_defaulted" = yes; then { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 { (exit 1); exit 1; }; } else { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 { (exit 1); exit 1; }; } fi fi (cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 { (exit 1); exit 1; }; } srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` ac_env_build_alias_set=${build_alias+set} ac_env_build_alias_value=$build_alias ac_cv_env_build_alias_set=${build_alias+set} ac_cv_env_build_alias_value=$build_alias ac_env_host_alias_set=${host_alias+set} ac_env_host_alias_value=$host_alias ac_cv_env_host_alias_set=${host_alias+set} ac_cv_env_host_alias_value=$host_alias ac_env_target_alias_set=${target_alias+set} ac_env_target_alias_value=$target_alias ac_cv_env_target_alias_set=${target_alias+set} ac_cv_env_target_alias_value=$target_alias ac_env_CXX_set=${CXX+set} ac_env_CXX_value=$CXX ac_cv_env_CXX_set=${CXX+set} ac_cv_env_CXX_value=$CXX ac_env_CXXFLAGS_set=${CXXFLAGS+set} ac_env_CXXFLAGS_value=$CXXFLAGS ac_cv_env_CXXFLAGS_set=${CXXFLAGS+set} ac_cv_env_CXXFLAGS_value=$CXXFLAGS ac_env_LDFLAGS_set=${LDFLAGS+set} ac_env_LDFLAGS_value=$LDFLAGS ac_cv_env_LDFLAGS_set=${LDFLAGS+set} ac_cv_env_LDFLAGS_value=$LDFLAGS ac_env_CPPFLAGS_set=${CPPFLAGS+set} ac_env_CPPFLAGS_value=$CPPFLAGS ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} ac_cv_env_CPPFLAGS_value=$CPPFLAGS ac_env_CC_set=${CC+set} ac_env_CC_value=$CC ac_cv_env_CC_set=${CC+set} ac_cv_env_CC_value=$CC ac_env_CFLAGS_set=${CFLAGS+set} ac_env_CFLAGS_value=$CFLAGS ac_cv_env_CFLAGS_set=${CFLAGS+set} ac_cv_env_CFLAGS_value=$CFLAGS ac_env_CPP_set=${CPP+set} ac_env_CPP_value=$CPP ac_cv_env_CPP_set=${CPP+set} ac_cv_env_CPP_value=$CPP # # Report the --help message. # if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF \`configure' configures this package to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... To assign environment variables (e.g., CC, CFLAGS...), specify them as VAR=VALUE. See below for descriptions of some of the useful variables. Defaults for the options are specified in brackets. Configuration: -h, --help display this help and exit --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit -q, --quiet, --silent do not print \`checking...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files --srcdir=DIR find the sources in DIR [configure dir or \`..'] _ACEOF cat <<_ACEOF Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [PREFIX] By default, \`make install' will install all the files in \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify an installation prefix other than \`$ac_default_prefix' using \`--prefix', for instance \`--prefix=\$HOME'. For better control, use the options below. Fine tuning of the installation directories: --bindir=DIR user executables [EPREFIX/bin] --sbindir=DIR system admin executables [EPREFIX/sbin] --libexecdir=DIR program executables [EPREFIX/libexec] --datadir=DIR read-only architecture-independent data [PREFIX/share] --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] --localstatedir=DIR modifiable single-machine data [PREFIX/var] --libdir=DIR object code libraries [EPREFIX/lib] --includedir=DIR C header files [PREFIX/include] --oldincludedir=DIR C header files for non-gcc [/usr/include] --infodir=DIR info documentation [PREFIX/info] --mandir=DIR man documentation [PREFIX/man] _ACEOF cat <<\_ACEOF Program names: --program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names _ACEOF fi if test -n "$ac_init_help"; then cat <<\_ACEOF Optional Features: --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --disable-dependency-tracking speeds up one-time build --enable-dependency-tracking do not reject slow dependency extractors --disable-largefile omit support for large files --enable-configdir=dir default directory for configuration Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) --with-ssl enable ssl will check /usr/local/ssl /usr/lib/ssl /usr/ssl /usr/pkg /usr/local /usr Some influential environment variables: CXX C++ compiler command CXXFLAGS C++ compiler flags LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory CPPFLAGS C/C++ preprocessor flags, e.g. -I if you have headers in a nonstandard directory CC C compiler command CFLAGS C compiler flags CPP C preprocessor Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. _ACEOF fi if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. ac_popdir=`pwd` for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue test -d $ac_dir || continue ac_builddir=. if test "$ac_dir" != .; then ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` # A "../" for each directory in $ac_dir_suffix. ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` else ac_dir_suffix= ac_top_builddir= fi case $srcdir in .) # No --srcdir option. We are building in place. ac_srcdir=. if test -z "$ac_top_builddir"; then ac_top_srcdir=. else ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` fi ;; [\\/]* | ?:[\\/]* ) # Absolute path. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ;; *) # Relative path. ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_builddir$srcdir ;; esac # Do not use `cd foo && pwd` to compute absolute paths, because # the directories may not exist. case `pwd` in .) ac_abs_builddir="$ac_dir";; *) case "$ac_dir" in .) ac_abs_builddir=`pwd`;; [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; *) ac_abs_builddir=`pwd`/"$ac_dir";; esac;; esac case $ac_abs_builddir in .) ac_abs_top_builddir=${ac_top_builddir}.;; *) case ${ac_top_builddir}. in .) ac_abs_top_builddir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; esac;; esac case $ac_abs_builddir in .) ac_abs_srcdir=$ac_srcdir;; *) case $ac_srcdir in .) ac_abs_srcdir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; esac;; esac case $ac_abs_builddir in .) ac_abs_top_srcdir=$ac_top_srcdir;; *) case $ac_top_srcdir in .) ac_abs_top_srcdir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; esac;; esac cd $ac_dir # Check for guested configure; otherwise get Cygnus style configure. if test -f $ac_srcdir/configure.gnu; then echo $SHELL $ac_srcdir/configure.gnu --help=recursive elif test -f $ac_srcdir/configure; then echo $SHELL $ac_srcdir/configure --help=recursive elif test -f $ac_srcdir/configure.ac || test -f $ac_srcdir/configure.in; then echo $ac_configure --help else echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi cd "$ac_popdir" done fi test -n "$ac_init_help" && exit 0 if $ac_init_version; then cat <<\_ACEOF Copyright (C) 2003 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF exit 0 fi exec 5>config.log cat >&5 <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by $as_me, which was generated by GNU Autoconf 2.59. Invocation command line was $ $0 $@ _ACEOF { cat <<_ASUNAME ## --------- ## ## Platform. ## ## --------- ## hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` /bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` hostinfo = `(hostinfo) 2>/dev/null || echo unknown` /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` _ASUNAME as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. echo "PATH: $as_dir" done } >&5 cat >&5 <<_ACEOF ## ----------- ## ## Core tests. ## ## ----------- ## _ACEOF # Keep a trace of the command line. # Strip out --no-create and --no-recursion so they do not pile up. # Strip out --silent because we don't want to record it for future runs. # Also quote any args containing shell meta-characters. # Make two passes to allow for proper duplicate-argument suppression. ac_configure_args= ac_configure_args0= ac_configure_args1= ac_sep= ac_must_keep_next=false for ac_pass in 1 2 do for ac_arg do case $ac_arg in -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) continue ;; *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case $ac_pass in 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; 2) ac_configure_args1="$ac_configure_args1 '$ac_arg'" if test $ac_must_keep_next = true; then ac_must_keep_next=false # Got value, back to normal. else case $ac_arg in *=* | --config-cache | -C | -disable-* | --disable-* \ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ | -with-* | --with-* | -without-* | --without-* | --x) case "$ac_configure_args0 " in "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; esac ;; -* ) ac_must_keep_next=true ;; esac fi ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" # Get rid of the leading space. ac_sep=" " ;; esac done done $as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } $as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there # would cause problems or look ugly. # WARNING: Be sure not to use single quotes in there, as some shells, # such as our DU 5.0 friend, will then `close' the trap. trap 'exit_status=$? # Save into config.log some information that might help in debugging. { echo cat <<\_ASBOX ## ---------------- ## ## Cache variables. ## ## ---------------- ## _ASBOX echo # The following way of writing the cache mishandles newlines in values, { (set) 2>&1 | case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in *ac_space=\ *) sed -n \ "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" ;; *) sed -n \ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" ;; esac; } echo cat <<\_ASBOX ## ----------------- ## ## Output variables. ## ## ----------------- ## _ASBOX echo for ac_var in $ac_subst_vars do eval ac_val=$`echo $ac_var` echo "$ac_var='"'"'$ac_val'"'"'" done | sort echo if test -n "$ac_subst_files"; then cat <<\_ASBOX ## ------------- ## ## Output files. ## ## ------------- ## _ASBOX echo for ac_var in $ac_subst_files do eval ac_val=$`echo $ac_var` echo "$ac_var='"'"'$ac_val'"'"'" done | sort echo fi if test -s confdefs.h; then cat <<\_ASBOX ## ----------- ## ## confdefs.h. ## ## ----------- ## _ASBOX echo sed "/^$/d" confdefs.h | sort echo fi test "$ac_signal" != 0 && echo "$as_me: caught signal $ac_signal" echo "$as_me: exit $exit_status" } >&5 rm -f core *.core && rm -rf conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status ' 0 for ac_signal in 1 2 13 15; do trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -rf conftest* confdefs.h # AIX cpp loses on an empty file, so make sure it contains at least a newline. echo >confdefs.h # Predefined preprocessor variables. cat >>confdefs.h <<_ACEOF #define PACKAGE_NAME "$PACKAGE_NAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_TARNAME "$PACKAGE_TARNAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_VERSION "$PACKAGE_VERSION" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_STRING "$PACKAGE_STRING" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" _ACEOF # Let the site file select an alternate cache file if it wants to. # Prefer explicitly selected file to automatically selected ones. if test -z "$CONFIG_SITE"; then if test "x$prefix" != xNONE; then CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" else CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" fi fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 echo "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" fi done if test -r "$cache_file"; then # Some versions of bash will fail to source /dev/null (special # files actually), so we avoid doing that. if test -f "$cache_file"; then { echo "$as_me:$LINENO: loading cache $cache_file" >&5 echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in [\\/]* | ?:[\\/]* ) . $cache_file;; *) . ./$cache_file;; esac fi else { echo "$as_me:$LINENO: creating cache $cache_file" >&5 echo "$as_me: creating cache $cache_file" >&6;} >$cache_file fi # Check that the precious variables saved in the cache have kept the same # value. ac_cache_corrupted=false for ac_var in `(set) 2>&1 | sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set eval ac_old_val="\$ac_cv_env_${ac_var}_value" eval ac_new_val="\$ac_env_${ac_var}_value" case $ac_old_set,$ac_new_set in set,) { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 echo "$as_me: former value: $ac_old_val" >&2;} { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 echo "$as_me: current value: $ac_new_val" >&2;} ac_cache_corrupted=: fi;; esac # Pass precious variables to config.status. if test "$ac_new_set" = set; then case $ac_new_val in *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; *) ac_arg=$ac_var=$ac_new_val ;; esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 echo "$as_me: error: changes in the environment can compromise the build" >&2;} { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} { (exit 1); exit 1; }; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu am__api_version="1.8" ac_aux_dir= for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do if test -f $ac_dir/install-sh; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" break elif test -f $ac_dir/install.sh; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break elif test -f $ac_dir/shtool; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/shtool install -c" break fi done if test -z "$ac_aux_dir"; then { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5 echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;} { (exit 1); exit 1; }; } fi ac_config_guess="$SHELL $ac_aux_dir/config.guess" ac_config_sub="$SHELL $ac_aux_dir/config.sub" ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AmigaOS /C/install, which installs bootblocks on floppy discs # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 if test -z "$INSTALL"; then if test "${ac_cv_path_install+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. # Account for people who put trailing slashes in PATH elements. case $as_dir/ in ./ | .// | /cC/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : elif test $ac_prog = install && grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # program-specific install script used by HP pwplus--don't use. : else ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" break 3 fi fi done done ;; esac done fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else # As a last resort, use the slow shell script. We don't cache a # path for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the path is relative. INSTALL=$ac_install_sh fi fi echo "$as_me:$LINENO: result: $INSTALL" >&5 echo "${ECHO_T}$INSTALL" >&6 # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' echo "$as_me:$LINENO: checking whether build environment is sane" >&5 echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6 # Just in case sleep 1 echo timestamp > conftest.file # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` if test "$*" = "X"; then # -L didn't work. set X `ls -t $srcdir/configure conftest.file` fi rm -f conftest.file if test "$*" != "X $srcdir/configure conftest.file" \ && test "$*" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken alias in your environment" >&5 echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken alias in your environment" >&2;} { (exit 1); exit 1; }; } fi test "$2" = conftest.file ) then # Ok. : else { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! Check your system clock" >&5 echo "$as_me: error: newly created file is older than distributed files! Check your system clock" >&2;} { (exit 1); exit 1; }; } fi echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6 test "$program_prefix" != NONE && program_transform_name="s,^,$program_prefix,;$program_transform_name" # Use a double $ so make ignores it. test "$program_suffix" != NONE && program_transform_name="s,\$,$program_suffix,;$program_transform_name" # Double any \ or $. echo might interpret backslashes. # By default was `s,x,x', remove it if useless. cat <<\_ACEOF >conftest.sed s/[\\$]/&&/g;s/;s,x,x,$// _ACEOF program_transform_name=`echo $program_transform_name | sed -f conftest.sed` rm conftest.sed # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " else am_missing_run= { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} fi if mkdir -p -- . 2>/dev/null; then # Keeping the `.' argument allows $(mkdir_p) to be used without # argument. Indeed, we sometimes output rules like # $(mkdir_p) $(somedir) # where $(somedir) is conditionally defined. # (`test -n '$(somedir)' && $(mkdir_p) $(somedir)' is a more # expensive solution, as it forces Make to start a sub-shell.) mkdir_p='mkdir -p -- .' else # On NextStep and OpenStep, the `mkdir' command does not # recognize any option. It will interpret all options as # directories to create, and then abort because `.' already # exists. for d in ./-p ./--; do test -d $d && rmdir $d done # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. if test -f "$ac_aux_dir/mkinstalldirs"; then mkdir_p='$(mkinstalldirs)' else mkdir_p='$(install_sh) -d' fi fi for ac_prog in gawk mawk nawk awk do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_AWK+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$AWK"; then ac_cv_prog_AWK="$AWK" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_AWK="$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi AWK=$ac_cv_prog_AWK if test -n "$AWK"; then echo "$as_me:$LINENO: result: $AWK" >&5 echo "${ECHO_T}$AWK" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi test -n "$AWK" && break done echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'` if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.make <<\_ACEOF all: @echo 'ac_maketemp="$(MAKE)"' _ACEOF # GNU make sometimes prints "make[1]: Entering...", which would confuse us. eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` if test -n "$ac_maketemp"; then eval ac_cv_prog_make_${ac_make}_set=yes else eval ac_cv_prog_make_${ac_make}_set=no fi rm -f conftest.make fi if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6 SET_MAKE= else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 SET_MAKE="MAKE=${MAKE-make}" fi rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null # test to see if srcdir already configured if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} { (exit 1); exit 1; }; } fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi # Define the identity of the package. PACKAGE=teepeedee VERSION=0.3.0 cat >>confdefs.h <<_ACEOF #define PACKAGE "$PACKAGE" _ACEOF cat >>confdefs.h <<_ACEOF #define VERSION "$VERSION" _ACEOF # Some tools Automake needs. ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} AMTAR=${AMTAR-"${am_missing_run}tar"} install_sh=${install_sh-"$am_aux_dir/install-sh"} # Installed binaries are usually stripped using `strip' when the user # run `make install-strip'. However `strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the `STRIP' environment variable to overrule this program. if test "$cross_compiling" != no; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_STRIP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then echo "$as_me:$LINENO: result: $STRIP" >&5 echo "${ECHO_T}$STRIP" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_STRIP="strip" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 echo "${ECHO_T}$ac_ct_STRIP" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi STRIP=$ac_ct_STRIP else STRIP="$ac_cv_prog_STRIP" fi fi INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" # We need awk for the "check" target. The system "awk" is bad on # some platforms. ac_ext=cc ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu if test -n "$ac_tool_prefix"; then for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_CXX+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CXX"; then ac_cv_prog_CXX="$CXX" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi CXX=$ac_cv_prog_CXX if test -n "$CXX"; then echo "$as_me:$LINENO: result: $CXX" >&5 echo "${ECHO_T}$CXX" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi test -n "$CXX" && break done fi if test -z "$CXX"; then ac_ct_CXX=$CXX for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_CXX"; then ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CXX="$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi ac_ct_CXX=$ac_cv_prog_ac_ct_CXX if test -n "$ac_ct_CXX"; then echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5 echo "${ECHO_T}$ac_ct_CXX" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi test -n "$ac_ct_CXX" && break done test -n "$ac_ct_CXX" || ac_ct_CXX="g++" CXX=$ac_ct_CXX fi # Provide some information about the compiler. echo "$as_me:$LINENO:" \ "checking for C++ compiler version" >&5 ac_compiler=`set X $ac_compile; echo $2` { (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 (eval $ac_compiler --version &5) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 (eval $ac_compiler -v &5) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 (eval $ac_compiler -V &5) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files a.out a.exe b.out" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. echo "$as_me:$LINENO: checking for C++ compiler default output file name" >&5 echo $ECHO_N "checking for C++ compiler default output file name... $ECHO_C" >&6 ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 (eval $ac_link_default) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then # Find the output, starting from the most likely. This scheme is # not robust to junk in `.', hence go to wildcards (a.*) only as a last # resort. # Be careful to initialize this variable, since it used to be cached. # Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. ac_cv_exeext= # b.out is created by i960 compilers. for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; conftest.$ac_ext ) # This is the source file. ;; [ab].out ) # We found the default executable, but exeext='' is most # certainly right. break;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` # FIXME: I believe we export ac_cv_exeext for Libtool, # but it would be cool to find out if it's true. Does anybody # maintain Libtool? --akim. export ac_cv_exeext break;; * ) break;; esac done else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { echo "$as_me:$LINENO: error: C++ compiler cannot create executables See \`config.log' for more details." >&5 echo "$as_me: error: C++ compiler cannot create executables See \`config.log' for more details." >&2;} { (exit 77); exit 77; }; } fi ac_exeext=$ac_cv_exeext echo "$as_me:$LINENO: result: $ac_file" >&5 echo "${ECHO_T}$ac_file" >&6 # Check the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. echo "$as_me:$LINENO: checking whether the C++ compiler works" >&5 echo $ECHO_N "checking whether the C++ compiler works... $ECHO_C" >&6 # FIXME: These cross compiler hacks should be removed for Autoconf 3.0 # If not cross compiling, check that we can run a simple program. if test "$cross_compiling" != yes; then if { ac_try='./$ac_file' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then cross_compiling=no else if test "$cross_compiling" = maybe; then cross_compiling=yes else { { echo "$as_me:$LINENO: error: cannot run C++ compiled programs. If you meant to cross compile, use \`--host'. See \`config.log' for more details." >&5 echo "$as_me: error: cannot run C++ compiled programs. If you meant to cross compile, use \`--host'. See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi fi fi echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6 rm -f a.out a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save # Check the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 echo "$as_me:$LINENO: result: $cross_compiling" >&5 echo "${ECHO_T}$cross_compiling" >&6 echo "$as_me:$LINENO: checking for suffix of executables" >&5 echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then # If both `conftest.exe' and `conftest' are `present' (well, observable) # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with # `rm'. for ac_file in conftest.exe conftest conftest.*; do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` export ac_cv_exeext break;; * ) break;; esac done else { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link See \`config.log' for more details." >&5 echo "$as_me: error: cannot compute suffix of executables: cannot compile and link See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi rm -f conftest$ac_cv_exeext echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 echo "${ECHO_T}$ac_cv_exeext" >&6 rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT echo "$as_me:$LINENO: checking for suffix of object files" >&5 echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 if test "${ac_cv_objext+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.o conftest.obj if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile See \`config.log' for more details." >&5 echo "$as_me: error: cannot compute suffix of object files: cannot compile See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi rm -f conftest.$ac_cv_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 echo "${ECHO_T}$ac_cv_objext" >&6 OBJEXT=$ac_cv_objext ac_objext=$OBJEXT echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5 echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6 if test "${ac_cv_cxx_compiler_gnu+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_compiler_gnu=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_compiler_gnu=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_cxx_compiler_gnu=$ac_compiler_gnu fi echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5 echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6 GXX=`test $ac_compiler_gnu = yes && echo yes` ac_test_CXXFLAGS=${CXXFLAGS+set} ac_save_CXXFLAGS=$CXXFLAGS CXXFLAGS="-g" echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5 echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6 if test "${ac_cv_prog_cxx_g+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_prog_cxx_g=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_prog_cxx_g=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5 echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6 if test "$ac_test_CXXFLAGS" = set; then CXXFLAGS=$ac_save_CXXFLAGS elif test $ac_cv_prog_cxx_g = yes; then if test "$GXX" = yes; then CXXFLAGS="-g -O2" else CXXFLAGS="-g" fi else if test "$GXX" = yes; then CXXFLAGS="-O2" else CXXFLAGS= fi fi for ac_declaration in \ '' \ 'extern "C" void std::exit (int) throw (); using std::exit;' \ 'extern "C" void std::exit (int); using std::exit;' \ 'extern "C" void exit (int) throw ();' \ 'extern "C" void exit (int);' \ 'void exit (int);' do cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_declaration #include int main () { exit (42); ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then : else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 continue fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_declaration int main () { exit (42); ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then break else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext done rm -f conftest* if test -n "$ac_declaration"; then echo '#ifdef __cplusplus' >>confdefs.h echo $ac_declaration >>confdefs.h echo '#endif' >>confdefs.h fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu DEPDIR="${am__leading_dot}deps" ac_config_commands="$ac_config_commands depfiles" am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo done .PHONY: am__doit END # If we don't find an include directive, just comment out the code. echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6 am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # We grep out `Entering directory' and `Leaving directory' # messages which can occur if `w' ends up in MAKEFLAGS. # In particular we don't look at `^make:' because GNU make might # be invoked under some other name (usually "gmake"), in which # case it prints its new name instead of `make'. if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then am__include=include am__quote= _am_result=GNU fi # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then am__include=.include am__quote="\"" _am_result=BSD fi fi echo "$as_me:$LINENO: result: $_am_result" >&5 echo "${ECHO_T}$_am_result" >&6 rm -f confinc confmf # Check whether --enable-dependency-tracking or --disable-dependency-tracking was given. if test "${enable_dependency_tracking+set}" = set; then enableval="$enable_dependency_tracking" fi; if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' fi if test "x$enable_dependency_tracking" != xno; then AMDEP_TRUE= AMDEP_FALSE='#' else AMDEP_TRUE='#' AMDEP_FALSE= fi depcc="$CXX" am_compiler_list= echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CXX_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c : > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf case $depmode in nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; none) break ;; esac # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. if depmode=$depmode \ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # (even with -Werror). So we grep stderr for any message # that says an option was ignored. if grep 'ignoring option' conftest.err >/dev/null 2>&1; then :; else am_cv_CXX_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CXX_dependencies_compiler_type=none fi fi echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5 echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6 CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then am__fastdepCXX_TRUE= am__fastdepCXX_FALSE='#' else am__fastdepCXX_TRUE='#' am__fastdepCXX_FALSE= fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ac_tool_prefix}ranlib; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_RANLIB+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$RANLIB"; then ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi RANLIB=$ac_cv_prog_RANLIB if test -n "$RANLIB"; then echo "$as_me:$LINENO: result: $RANLIB" >&5 echo "${ECHO_T}$RANLIB" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi fi if test -z "$ac_cv_prog_RANLIB"; then ac_ct_RANLIB=$RANLIB # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_RANLIB"; then ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_RANLIB="ranlib" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" fi fi ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB if test -n "$ac_ct_RANLIB"; then echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 echo "${ECHO_T}$ac_ct_RANLIB" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi RANLIB=$ac_ct_RANLIB else RANLIB="$ac_cv_prog_RANLIB" fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}gcc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_ac_ct_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="gcc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 echo "${ECHO_T}$ac_ct_CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi CC=$ac_ct_CC else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}cc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_ac_ct_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="cc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 echo "${ECHO_T}$ac_ct_CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi CC=$ac_ct_CC else CC="$ac_cv_prog_CC" fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then for ac_prog in cl do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC for ac_prog in cl do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_ac_ct_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 echo "${ECHO_T}$ac_ct_CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi test -n "$ac_ct_CC" && break done CC=$ac_ct_CC fi fi test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH See \`config.log' for more details." >&5 echo "$as_me: error: no acceptable C compiler found in \$PATH See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } # Provide some information about the compiler. echo "$as_me:$LINENO:" \ "checking for C compiler version" >&5 ac_compiler=`set X $ac_compile; echo $2` { (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 (eval $ac_compiler --version &5) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 (eval $ac_compiler -v &5) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 (eval $ac_compiler -V &5) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 if test "${ac_cv_c_compiler_gnu+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_compiler_gnu=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_compiler_gnu=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 GCC=`test $ac_compiler_gnu = yes && echo yes` ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS CFLAGS="-g" echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 if test "${ac_cv_prog_cc_g+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_prog_cc_g=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_prog_cc_g=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 if test "${ac_cv_prog_cc_stdc+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_cv_prog_cc_stdc=no ac_save_CC=$CC cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #include #include /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); static char *e (p, i) char **p; int i; { return p[i]; } static char *f (char * (*g) (char **, int), char **p, ...) { char *s; va_list v; va_start (v,p); s = g (p, va_arg (v,int)); va_end (v); return s; } /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated as 'x'. The following induces an error, until -std1 is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something that's true only with -std1. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); int argc; char **argv; int main () { return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ; return 0; } _ACEOF # Don't try gcc -ansi; that turns off useful extensions and # breaks some systems' header files. # AIX -qlanglvl=ansi # Ultrix and OSF/1 -std1 # HP-UX 10.20 and later -Ae # HP-UX older versions -Aa -D_HPUX_SOURCE # SVR4 -Xc -D__EXTENSIONS__ for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_prog_cc_stdc=$ac_arg break else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f conftest.err conftest.$ac_objext done rm -f conftest.$ac_ext conftest.$ac_objext CC=$ac_save_CC fi case "x$ac_cv_prog_cc_stdc" in x|xno) echo "$as_me:$LINENO: result: none needed" >&5 echo "${ECHO_T}none needed" >&6 ;; *) echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 CC="$CC $ac_cv_prog_cc_stdc" ;; esac # Some people use a C++ compiler to compile C. Since we use `exit', # in C++ we need to declare it. In case someone uses the same compiler # for both compiling C and C++ we need to have the C++ compiler decide # the declaration of exit, since it's the most demanding environment. cat >conftest.$ac_ext <<_ACEOF #ifndef __cplusplus choke me #endif _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then for ac_declaration in \ '' \ 'extern "C" void std::exit (int) throw (); using std::exit;' \ 'extern "C" void std::exit (int); using std::exit;' \ 'extern "C" void exit (int) throw ();' \ 'extern "C" void exit (int);' \ 'void exit (int);' do cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_declaration #include int main () { exit (42); ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then : else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 continue fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_declaration int main () { exit (42); ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then break else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext done rm -f conftest* if test -n "$ac_declaration"; then echo '#ifdef __cplusplus' >>confdefs.h echo $ac_declaration >>confdefs.h echo '#endif' >>confdefs.h fi else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu depcc="$CC" am_compiler_list= echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CC_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c : > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf case $depmode in nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; none) break ;; esac # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. if depmode=$depmode \ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # (even with -Werror). So we grep stderr for any message # that says an option was ignored. if grep 'ignoring option' conftest.err >/dev/null 2>&1; then :; else am_cv_CC_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CC_dependencies_compiler_type=none fi fi echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6 CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then am__fastdepCC_TRUE= am__fastdepCC_FALSE='#' else am__fastdepCC_TRUE='#' am__fastdepCC_FALSE= fi # Check whether --enable-largefile or --disable-largefile was given. if test "${enable_largefile+set}" = set; then enableval="$enable_largefile" fi; if test "$enable_largefile" != no; then echo "$as_me:$LINENO: checking for special C compiler options needed for large files" >&5 echo $ECHO_N "checking for special C compiler options needed for large files... $ECHO_C" >&6 if test "${ac_cv_sys_largefile_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_cv_sys_largefile_CC=no if test "$GCC" != yes; then ac_save_CC=$CC while :; do # IRIX 6.2 and later do not support large files by default, # so use the C compiler's -n32 option if that helps. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include /* Check that off_t can represent 2**63 - 1 correctly. We can't simply define LARGE_OFF_T to be 9223372036854775807, since some C++ compilers masquerading as C compilers incorrectly reject 9223372036854775807. */ #define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 && LARGE_OFF_T % 2147483647 == 1) ? 1 : -1]; int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then break else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f conftest.err conftest.$ac_objext CC="$CC -n32" rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_sys_largefile_CC=' -n32'; break else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f conftest.err conftest.$ac_objext break done CC=$ac_save_CC rm -f conftest.$ac_ext fi fi echo "$as_me:$LINENO: result: $ac_cv_sys_largefile_CC" >&5 echo "${ECHO_T}$ac_cv_sys_largefile_CC" >&6 if test "$ac_cv_sys_largefile_CC" != no; then CC=$CC$ac_cv_sys_largefile_CC fi echo "$as_me:$LINENO: checking for _FILE_OFFSET_BITS value needed for large files" >&5 echo $ECHO_N "checking for _FILE_OFFSET_BITS value needed for large files... $ECHO_C" >&6 if test "${ac_cv_sys_file_offset_bits+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else while :; do ac_cv_sys_file_offset_bits=no cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include /* Check that off_t can represent 2**63 - 1 correctly. We can't simply define LARGE_OFF_T to be 9223372036854775807, since some C++ compilers masquerading as C compilers incorrectly reject 9223372036854775807. */ #define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 && LARGE_OFF_T % 2147483647 == 1) ? 1 : -1]; int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then break else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #define _FILE_OFFSET_BITS 64 #include /* Check that off_t can represent 2**63 - 1 correctly. We can't simply define LARGE_OFF_T to be 9223372036854775807, since some C++ compilers masquerading as C compilers incorrectly reject 9223372036854775807. */ #define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 && LARGE_OFF_T % 2147483647 == 1) ? 1 : -1]; int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_sys_file_offset_bits=64; break else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext break done fi echo "$as_me:$LINENO: result: $ac_cv_sys_file_offset_bits" >&5 echo "${ECHO_T}$ac_cv_sys_file_offset_bits" >&6 if test "$ac_cv_sys_file_offset_bits" != no; then cat >>confdefs.h <<_ACEOF #define _FILE_OFFSET_BITS $ac_cv_sys_file_offset_bits _ACEOF fi rm -f conftest* echo "$as_me:$LINENO: checking for _LARGE_FILES value needed for large files" >&5 echo $ECHO_N "checking for _LARGE_FILES value needed for large files... $ECHO_C" >&6 if test "${ac_cv_sys_large_files+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else while :; do ac_cv_sys_large_files=no cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include /* Check that off_t can represent 2**63 - 1 correctly. We can't simply define LARGE_OFF_T to be 9223372036854775807, since some C++ compilers masquerading as C compilers incorrectly reject 9223372036854775807. */ #define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 && LARGE_OFF_T % 2147483647 == 1) ? 1 : -1]; int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then break else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #define _LARGE_FILES 1 #include /* Check that off_t can represent 2**63 - 1 correctly. We can't simply define LARGE_OFF_T to be 9223372036854775807, since some C++ compilers masquerading as C compilers incorrectly reject 9223372036854775807. */ #define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 && LARGE_OFF_T % 2147483647 == 1) ? 1 : -1]; int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_sys_large_files=1; break else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext break done fi echo "$as_me:$LINENO: result: $ac_cv_sys_large_files" >&5 echo "${ECHO_T}$ac_cv_sys_large_files" >&6 if test "$ac_cv_sys_large_files" != no; then cat >>confdefs.h <<_ACEOF #define _LARGE_FILES $ac_cv_sys_large_files _ACEOF fi rm -f conftest* fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then if test "${ac_cv_prog_CPP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else # Double quotes because CPP needs to be expanded for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" do ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then : else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Broken: fails on valid input. continue fi rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether non-existent headers # can be detected and how. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then # Broken: success on invalid input. continue else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then break fi done ac_cv_prog_CPP=$CPP fi CPP=$ac_cv_prog_CPP else ac_cv_prog_CPP=$CPP fi echo "$as_me:$LINENO: result: $CPP" >&5 echo "${ECHO_T}$CPP" >&6 ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then : else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Broken: fails on valid input. continue fi rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether non-existent headers # can be detected and how. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then # Broken: success on invalid input. continue else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check See \`config.log' for more details." >&5 echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu echo "$as_me:$LINENO: checking for egrep" >&5 echo $ECHO_N "checking for egrep... $ECHO_C" >&6 if test "${ac_cv_prog_egrep+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if echo a | (grep -E '(a|b)') >/dev/null 2>&1 then ac_cv_prog_egrep='grep -E' else ac_cv_prog_egrep='egrep' fi fi echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 echo "${ECHO_T}$ac_cv_prog_egrep" >&6 EGREP=$ac_cv_prog_egrep echo "$as_me:$LINENO: checking for ANSI C header files" >&5 echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 if test "${ac_cv_header_stdc+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #include #include int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_header_stdc=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_header_stdc=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else # define ISLOWER(c) \ (('a' <= (c) && (c) <= 'i') \ || ('j' <= (c) && (c) <= 'r') \ || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) #endif #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } _ACEOF rm -f conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then : else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_header_stdc=no fi rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi fi echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 echo "${ECHO_T}$ac_cv_header_stdc" >&6 if test $ac_cv_header_stdc = yes; then cat >>confdefs.h <<\_ACEOF #define STDC_HEADERS 1 _ACEOF fi # On IRIX 5.3, sys/types and inttypes.h are conflicting. for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ inttypes.h stdint.h unistd.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then eval "$as_ac_Header=yes" else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_Header=no" fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done for ac_header in sys/sendfile.h sys/uio.h crypt.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` if eval "test \"\${$as_ac_Header+set}\" = set"; then echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 else # Is the header compilable? echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6 # Is the header present? echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 echo "${ECHO_T}$ac_header_preproc" >&6 # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in yes:no: ) { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ( cat <<\_ASBOX ## ------------------------------------------ ## ## Report this to the AC_PACKAGE_NAME lists. ## ## ------------------------------------------ ## _ASBOX ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 fi if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done echo "$as_me:$LINENO: checking whether sendfile is declared" >&5 echo $ECHO_N "checking whether sendfile is declared... $ECHO_C" >&6 if test "${ac_cv_have_decl_sendfile+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #ifdef HAVE_SYS_SENDFILE_H #include #endif #ifdef HAVE_SYS_UIO_H #include #include #include #endif int main () { #ifndef sendfile char *p = (char *) sendfile; #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_have_decl_sendfile=yes else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_have_decl_sendfile=no fi rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_have_decl_sendfile" >&5 echo "${ECHO_T}$ac_cv_have_decl_sendfile" >&6 if test $ac_cv_have_decl_sendfile = yes; then cat >>confdefs.h <<_ACEOF #define HAVE_DECL_SENDFILE 1 _ACEOF else cat >>confdefs.h <<_ACEOF #define HAVE_DECL_SENDFILE 0 _ACEOF fi for ac_func in sendfile readdir_r do as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` echo "$as_me:$LINENO: checking for $ac_func" >&5 echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 if eval "test \"\${$as_ac_var+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define $ac_func to an innocuous variant, in case declares $ac_func. For example, HP-UX 11i declares gettimeofday. */ #define $ac_func innocuous_$ac_func /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $ac_func /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" { #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else char (*f) () = $ac_func; #endif #ifdef __cplusplus } #endif int main () { return f != $ac_func; ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then eval "$as_ac_var=yes" else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_var=no" fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 if test `eval echo '${'$as_ac_var'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF fi done echo "$as_me:$LINENO: checking if ssl is wanted" >&5 echo $ECHO_N "checking if ssl is wanted... $ECHO_C" >&6 # Check whether --with-ssl or --without-ssl was given. if test "${with_ssl+set}" = set; then withval="$with_ssl" if test "x$withval" == xno; then echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 openssl_dont_want=true else echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6 openssl_search_dir="$withval" fi else echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6 fi; if test "x$openssl_dont_want" != xtrue; then for dir in $openssl_search_dir /usr/local/ssl /usr/lib/ssl /usr/ssl /usr/pkg /usr/local /usr; do ssldir="$dir" if test -f "$dir/include/openssl/ssl.h"; then found_ssl="yes"; cat >>confdefs.h <<\_ACEOF #define HAVE_OPENSSL 1 _ACEOF CPPFLAGS="$CPPFLAGS -I$ssldir/include" break; fi done if test x_$found_ssl != x_yes; then { { echo "$as_me:$LINENO: error: Cannot find ssl libraries" >&5 echo "$as_me: error: Cannot find ssl libraries" >&2;} { (exit 1); exit 1; }; } else printf "OpenSSL found in $ssldir\n"; LIBS="$LIBS -lssl -lcrypto"; LDFLAGS="$LDFLAGS -L$ssldir/lib"; HAVE_OPENSSL=yes fi fi # Check whether --enable-configdir or --disable-configdir was given. if test "${enable_configdir+set}" = set; then enableval="$enable_configdir" tpd_configdir="$enableval" else tpd_configdir="/etc/${PACKAGE}" fi; cat >>confdefs.h <<_ACEOF #define TPD_CONFIGDIR "`eval echo ${tpd_configdir}`" _ACEOF ac_config_files="$ac_config_files Makefile src/Makefile lib/Makefile" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs, see configure's option --config-cache. # It is not useful on other systems. If it contains results you don't # want to keep, you may remove or edit it. # # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # # `ac_cv_env_foo' variables (set or unset) will be overridden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. _ACEOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, don't put newlines in cache variables' values. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. { (set) 2>&1 | case `(ac_space=' '; set | grep ac_space) 2>&1` in *ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote # substitution turns \\\\ into \\, and sed turns \\ into \). sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ;; *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n \ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" ;; esac; } | sed ' t clear : clear s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ t end /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ : end' >>confcache if diff $cache_file confcache >/dev/null 2>&1; then :; else if test -w $cache_file; then test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" cat confcache >$cache_file else echo "not updating unwritable cache $cache_file" fi fi rm -f confcache test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' # VPATH may cause trouble with some makes, so we remove $(srcdir), # ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then ac_vpsub='/^[ ]*VPATH[ ]*=/{ s/:*\$(srcdir):*/:/; s/:*\${srcdir}:*/:/; s/:*@srcdir@:*/:/; s/^\([^=]*=[ ]*\):*/\1/; s/:*$//; s/^[^=]*=[ ]*$//; }' fi # Transform confdefs.h into DEFS. # Protect against shell expansion while executing Makefile rules. # Protect against Makefile macro expansion. # # If the first sed substitution is executed (which looks for macros that # take arguments), then we branch to the quote section. Otherwise, # look for a macro that doesn't take arguments. cat >confdef2opt.sed <<\_ACEOF t clear : clear s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g t quote s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g t quote d : quote s,[ `~#$^&*(){}\\|;'"<>?],\\&,g s,\[,\\&,g s,\],\\&,g s,\$,$$,g p _ACEOF # We use echo to avoid assuming a particular line-breaking character. # The extra dot is to prevent the shell from consuming trailing # line-breaks from the sub-command output. A line-break within # single-quotes doesn't work because, if this script is created in a # platform that uses two characters for line-breaks (e.g., DOS), tr # would break. ac_LF_and_DOT=`echo; echo .` DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'` rm -f confdef2opt.sed ac_libobjs= ac_ltlibobjs= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. ac_i=`echo "$ac_i" | sed 's/\$U\././;s/\.o$//;s/\.obj$//'` # 2. Add them. ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' done LIBOBJS=$ac_libobjs LTLIBOBJS=$ac_ltlibobjs if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. Usually this means the macro was only invoked conditionally." >&5 echo "$as_me: error: conditional \"AMDEP\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined. Usually this means the macro was only invoked conditionally." >&5 echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." >&5 echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi : ${CONFIG_STATUS=./config.status} ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" { echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 echo "$as_me: creating $CONFIG_STATUS" >&6;} cat >$CONFIG_STATUS <<_ACEOF #! $SHELL # Generated by $as_me. # Run this file to recreate the current configuration. # Compiler output produced by configure, useful for debugging # configure, is in config.log if it exists. debug=false ac_cs_recheck=false ac_cs_silent=false SHELL=\${CONFIG_SHELL-$SHELL} _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## # Be Bourne compatible if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then set -o posix fi DUALCASE=1; export DUALCASE # for MKS sh # Support unset when possible. if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then as_unset=unset else as_unset=false fi # Work around bugs in pre-3.0 UWIN ksh. $as_unset ENV MAIL MAILPATH PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. for as_var in \ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ LC_TELEPHONE LC_TIME do if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then eval $as_var=C; export $as_var else $as_unset $as_var fi done # Required to use basename. if expr a : '\(a\)' >/dev/null 2>&1; then as_expr=expr else as_expr=false fi if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi # Name of the executable. as_me=`$as_basename "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)$' \| \ . : '\(.\)' 2>/dev/null || echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } /^X\/\(\/\/\)$/{ s//\1/; q; } /^X\/\(\/\).*/{ s//\1/; q; } s/.*/./; q'` # PATH needs CR, and LINENO needs CR and PATH. # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then echo "#! /bin/sh" >conf$$.sh echo "exit 0" >>conf$$.sh chmod +x conf$$.sh if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi rm -f conf$$.sh fi as_lineno_1=$LINENO as_lineno_2=$LINENO as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && test "x$as_lineno_3" = "x$as_lineno_2" || { # Find who we are. Look in the path if we contain no path at all # relative or not. case $0 in *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} { (exit 1); exit 1; }; } fi case $CONFIG_SHELL in '') as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for as_base in sh bash ksh sh5; do case $as_dir in /*) if ("$as_dir/$as_base" -c ' as_lineno_1=$LINENO as_lineno_2=$LINENO as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } CONFIG_SHELL=$as_dir/$as_base export CONFIG_SHELL exec "$CONFIG_SHELL" "$0" ${1+"$@"} fi;; esac done done ;; esac # Create $as_me.lineno as a copy of $as_myself, but with $LINENO # uniformly replaced by the line number. The first 'sed' inserts a # line-number line before each line; the second 'sed' does the real # work. The second script uses 'N' to pair each line-number line # with the numbered line, and appends trailing '-' during # substitution so that $LINENO is not a special case at line end. # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) sed '=' <$as_myself | sed ' N s,$,-, : loop s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, t loop s,-$,, s,^['$as_cr_digits']*\n,, ' >$as_me.lineno && chmod +x $as_me.lineno || { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} { (exit 1); exit 1; }; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensible to this). . ./$as_me.lineno # Exit status is that of the last command. exit } case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in *c*,-n*) ECHO_N= ECHO_C=' ' ECHO_T=' ' ;; *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; *) ECHO_N= ECHO_C='\c' ECHO_T= ;; esac if expr a : '\(a\)' >/dev/null 2>&1; then as_expr=expr else as_expr=false fi rm -f conf$$ conf$$.exe conf$$.file echo >conf$$.file if ln -s conf$$.file conf$$ 2>/dev/null; then # We could just check for DJGPP; but this test a) works b) is more generic # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). if test -f conf$$.exe; then # Don't use ln at all; we don't have any links as_ln_s='cp -p' else as_ln_s='ln -s' fi elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.file if mkdir -p . 2>/dev/null; then as_mkdir_p=: else test -d ./-p && rmdir ./-p as_mkdir_p=false fi as_executable_p="test -f" # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" # IFS # We need space, tab and new line, in precisely that order. as_nl=' ' IFS=" $as_nl" # CDPATH. $as_unset CDPATH exec 6>&1 # Open the log real soon, to keep \$[0] and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. Logging --version etc. is OK. exec 5>>config.log { echo sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ## Running $as_me. ## _ASBOX } >&5 cat >&5 <<_CSEOF This file was extended by $as_me, which was generated by GNU Autoconf 2.59. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS CONFIG_LINKS = $CONFIG_LINKS CONFIG_COMMANDS = $CONFIG_COMMANDS $ $0 $@ _CSEOF echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 echo >&5 _ACEOF # Files that config.status was made for. if test -n "$ac_config_files"; then echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS fi if test -n "$ac_config_headers"; then echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS fi if test -n "$ac_config_links"; then echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS fi if test -n "$ac_config_commands"; then echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS fi cat >>$CONFIG_STATUS <<\_ACEOF ac_cs_usage="\ \`$as_me' instantiates files from templates according to the current configuration. Usage: $0 [OPTIONS] [FILE]... -h, --help print this help, then exit -V, --version print version number, then exit -q, --quiet do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] instantiate the configuration file FILE Configuration files: $config_files Configuration commands: $config_commands Report bugs to ." _ACEOF cat >>$CONFIG_STATUS <<_ACEOF ac_cs_version="\\ config.status configured by $0, generated by GNU Autoconf 2.59, with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" Copyright (C) 2003 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." srcdir=$srcdir INSTALL="$INSTALL" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF # If no file are specified by the user, then we need to provide default # value. By we need to know if files were specified by the user. ac_need_defaults=: while test $# != 0 do case $1 in --*=*) ac_option=`expr "x$1" : 'x\([^=]*\)='` ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` ac_shift=: ;; -*) ac_option=$1 ac_optarg=$2 ac_shift=shift ;; *) # This is not an option, so the user has probably given explicit # arguments. ac_option=$1 ac_need_defaults=false;; esac case $ac_option in # Handling of the options. _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ac_cs_recheck=: ;; --version | --vers* | -V ) echo "$ac_cs_version"; exit 0 ;; --he | --h) # Conflict between --help and --header { { echo "$as_me:$LINENO: error: ambiguous option: $1 Try \`$0 --help' for more information." >&5 echo "$as_me: error: ambiguous option: $1 Try \`$0 --help' for more information." >&2;} { (exit 1); exit 1; }; };; --help | --hel | -h ) echo "$ac_cs_usage"; exit 0 ;; --debug | --d* | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift CONFIG_FILES="$CONFIG_FILES $ac_optarg" ac_need_defaults=false;; --header | --heade | --head | --hea ) $ac_shift CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" ac_need_defaults=false;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil | --si | --s) ac_cs_silent=: ;; # This is an error. -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 Try \`$0 --help' for more information." >&5 echo "$as_me: error: unrecognized option: $1 Try \`$0 --help' for more information." >&2;} { (exit 1); exit 1; }; } ;; *) ac_config_targets="$ac_config_targets $1" ;; esac shift done ac_configure_extra_args= if $ac_cs_silent; then exec 6>/dev/null ac_configure_extra_args="$ac_configure_extra_args --silent" fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF if \$ac_cs_recheck; then echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF # # INIT-COMMANDS section. # AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF for ac_config_target in $ac_config_targets do case "$ac_config_target" in # Handling of arguments. "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; "src/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; "lib/Makefile" ) CONFIG_FILES="$CONFIG_FILES lib/Makefile" ;; "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 echo "$as_me: error: invalid argument: $ac_config_target" >&2;} { (exit 1); exit 1; }; };; esac done # If the user did not use the arguments to specify the items to instantiate, # then the envvar interface is used. Set only those that are not. # We use the long form for the default assignment because of an extremely # bizarre bug on SunOS 4.1.3. if $ac_need_defaults; then test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands fi # Have a temporary directory for convenience. Make it in the build tree # simply because there is no reason to put it here, and in addition, # creating and moving files from /tmp can sometimes cause problems. # Create a temporary directory, and hook for its removal unless debugging. $debug || { trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 trap '{ (exit 1); exit 1; }' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. { tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" } || { tmp=./confstat$$-$RANDOM (umask 077 && mkdir $tmp) } || { echo "$me: cannot create a temporary directory in ." >&2 { (exit 1); exit 1; } } _ACEOF cat >>$CONFIG_STATUS <<_ACEOF # # CONFIG_FILES section. # # No need to generate the scripts if there are no CONFIG_FILES. # This happens for instance when ./config.status config.h if test -n "\$CONFIG_FILES"; then # Protect against being on the right side of a sed subst in config.status. sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF s,@SHELL@,$SHELL,;t t s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t s,@exec_prefix@,$exec_prefix,;t t s,@prefix@,$prefix,;t t s,@program_transform_name@,$program_transform_name,;t t s,@bindir@,$bindir,;t t s,@sbindir@,$sbindir,;t t s,@libexecdir@,$libexecdir,;t t s,@datadir@,$datadir,;t t s,@sysconfdir@,$sysconfdir,;t t s,@sharedstatedir@,$sharedstatedir,;t t s,@localstatedir@,$localstatedir,;t t s,@libdir@,$libdir,;t t s,@includedir@,$includedir,;t t s,@oldincludedir@,$oldincludedir,;t t s,@infodir@,$infodir,;t t s,@mandir@,$mandir,;t t s,@build_alias@,$build_alias,;t t s,@host_alias@,$host_alias,;t t s,@target_alias@,$target_alias,;t t s,@DEFS@,$DEFS,;t t s,@ECHO_C@,$ECHO_C,;t t s,@ECHO_N@,$ECHO_N,;t t s,@ECHO_T@,$ECHO_T,;t t s,@LIBS@,$LIBS,;t t s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t s,@INSTALL_DATA@,$INSTALL_DATA,;t t s,@CYGPATH_W@,$CYGPATH_W,;t t s,@PACKAGE@,$PACKAGE,;t t s,@VERSION@,$VERSION,;t t s,@ACLOCAL@,$ACLOCAL,;t t s,@AUTOCONF@,$AUTOCONF,;t t s,@AUTOMAKE@,$AUTOMAKE,;t t s,@AUTOHEADER@,$AUTOHEADER,;t t s,@MAKEINFO@,$MAKEINFO,;t t s,@AMTAR@,$AMTAR,;t t s,@install_sh@,$install_sh,;t t s,@STRIP@,$STRIP,;t t s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t s,@mkdir_p@,$mkdir_p,;t t s,@AWK@,$AWK,;t t s,@SET_MAKE@,$SET_MAKE,;t t s,@am__leading_dot@,$am__leading_dot,;t t s,@CXX@,$CXX,;t t s,@CXXFLAGS@,$CXXFLAGS,;t t s,@LDFLAGS@,$LDFLAGS,;t t s,@CPPFLAGS@,$CPPFLAGS,;t t s,@ac_ct_CXX@,$ac_ct_CXX,;t t s,@EXEEXT@,$EXEEXT,;t t s,@OBJEXT@,$OBJEXT,;t t s,@DEPDIR@,$DEPDIR,;t t s,@am__include@,$am__include,;t t s,@am__quote@,$am__quote,;t t s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t s,@CXXDEPMODE@,$CXXDEPMODE,;t t s,@am__fastdepCXX_TRUE@,$am__fastdepCXX_TRUE,;t t s,@am__fastdepCXX_FALSE@,$am__fastdepCXX_FALSE,;t t s,@RANLIB@,$RANLIB,;t t s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t s,@CC@,$CC,;t t s,@CFLAGS@,$CFLAGS,;t t s,@ac_ct_CC@,$ac_ct_CC,;t t s,@CCDEPMODE@,$CCDEPMODE,;t t s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t s,@CPP@,$CPP,;t t s,@EGREP@,$EGREP,;t t s,@HAVE_OPENSSL@,$HAVE_OPENSSL,;t t s,@LIBOBJS@,$LIBOBJS,;t t s,@LTLIBOBJS@,$LTLIBOBJS,;t t CEOF _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF # Split the substitutions into bite-sized pieces for seds with # small command number limits, like on Digital OSF/1 and HP-UX. ac_max_sed_lines=48 ac_sed_frag=1 # Number of current file. ac_beg=1 # First line for current file. ac_end=$ac_max_sed_lines # Line after last line for current file. ac_more_lines=: ac_sed_cmds= while $ac_more_lines; do if test $ac_beg -gt 1; then sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag else sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag fi if test ! -s $tmp/subs.frag; then ac_more_lines=false else # The purpose of the label and of the branching condition is to # speed up the sed processing (if there are no `@' at all, there # is no need to browse any of the substitutions). # These are the two extra sed commands mentioned above. (echo ':t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed if test -z "$ac_sed_cmds"; then ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" else ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" fi ac_sed_frag=`expr $ac_sed_frag + 1` ac_beg=$ac_end ac_end=`expr $ac_end + $ac_max_sed_lines` fi done if test -z "$ac_sed_cmds"; then ac_sed_cmds=cat fi fi # test -n "$CONFIG_FILES" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". case $ac_file in - | *:- | *:-:* ) # input from stdin cat >$tmp/stdin ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; * ) ac_file_in=$ac_file.in ;; esac # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. ac_dir=`(dirname "$ac_file") 2>/dev/null || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` { if $as_mkdir_p; then mkdir -p "$ac_dir" else as_dir="$ac_dir" as_dirs= while test ! -d "$as_dir"; do as_dirs="$as_dir $as_dirs" as_dir=`(dirname "$as_dir") 2>/dev/null || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` done test ! -n "$as_dirs" || mkdir $as_dirs fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} { (exit 1); exit 1; }; }; } ac_builddir=. if test "$ac_dir" != .; then ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` # A "../" for each directory in $ac_dir_suffix. ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` else ac_dir_suffix= ac_top_builddir= fi case $srcdir in .) # No --srcdir option. We are building in place. ac_srcdir=. if test -z "$ac_top_builddir"; then ac_top_srcdir=. else ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` fi ;; [\\/]* | ?:[\\/]* ) # Absolute path. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ;; *) # Relative path. ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_builddir$srcdir ;; esac # Do not use `cd foo && pwd` to compute absolute paths, because # the directories may not exist. case `pwd` in .) ac_abs_builddir="$ac_dir";; *) case "$ac_dir" in .) ac_abs_builddir=`pwd`;; [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; *) ac_abs_builddir=`pwd`/"$ac_dir";; esac;; esac case $ac_abs_builddir in .) ac_abs_top_builddir=${ac_top_builddir}.;; *) case ${ac_top_builddir}. in .) ac_abs_top_builddir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; esac;; esac case $ac_abs_builddir in .) ac_abs_srcdir=$ac_srcdir;; *) case $ac_srcdir in .) ac_abs_srcdir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; esac;; esac case $ac_abs_builddir in .) ac_abs_top_srcdir=$ac_top_srcdir;; *) case $ac_top_srcdir in .) ac_abs_top_srcdir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; esac;; esac case $INSTALL in [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; *) ac_INSTALL=$ac_top_builddir$INSTALL ;; esac # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ if test x"$ac_file" = x-; then configure_input= else configure_input="$ac_file. " fi configure_input=$configure_input"Generated from `echo $ac_file_in | sed 's,.*/,,'` by configure." # First look for the input files in the build tree, otherwise in the # src tree. ac_file_inputs=`IFS=: for f in $ac_file_in; do case $f in -) echo $tmp/stdin ;; [\\/$]*) # Absolute (can't be DOS-style, as IFS=:) test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } echo "$f";; *) # Relative if test -f "$f"; then # Build tree echo "$f" elif test -f "$srcdir/$f"; then # Source tree echo "$srcdir/$f" else # /dev/null tree { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } fi;; esac done` || { (exit 1); exit 1; } if test x"$ac_file" != x-; then { echo "$as_me:$LINENO: creating $ac_file" >&5 echo "$as_me: creating $ac_file" >&6;} rm -f "$ac_file" fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF sed "$ac_vpsub $extrasub _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b s,@configure_input@,$configure_input,;t t s,@srcdir@,$ac_srcdir,;t t s,@abs_srcdir@,$ac_abs_srcdir,;t t s,@top_srcdir@,$ac_top_srcdir,;t t s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t s,@builddir@,$ac_builddir,;t t s,@abs_builddir@,$ac_abs_builddir,;t t s,@top_builddir@,$ac_top_builddir,;t t s,@abs_top_builddir@,$ac_abs_top_builddir,;t t s,@INSTALL@,$ac_INSTALL,;t t " $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out rm -f $tmp/stdin if test x"$ac_file" != x-; then mv $tmp/out $ac_file else cat $tmp/out rm -f $tmp/out fi done _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF # # CONFIG_COMMANDS section. # for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue ac_dest=`echo "$ac_file" | sed 's,:.*,,'` ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'` ac_dir=`(dirname "$ac_dest") 2>/dev/null || $as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_dest" : 'X\(//\)[^/]' \| \ X"$ac_dest" : 'X\(//\)$' \| \ X"$ac_dest" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$ac_dest" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` { if $as_mkdir_p; then mkdir -p "$ac_dir" else as_dir="$ac_dir" as_dirs= while test ! -d "$as_dir"; do as_dirs="$as_dir $as_dirs" as_dir=`(dirname "$as_dir") 2>/dev/null || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` done test ! -n "$as_dirs" || mkdir $as_dirs fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} { (exit 1); exit 1; }; }; } ac_builddir=. if test "$ac_dir" != .; then ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` # A "../" for each directory in $ac_dir_suffix. ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` else ac_dir_suffix= ac_top_builddir= fi case $srcdir in .) # No --srcdir option. We are building in place. ac_srcdir=. if test -z "$ac_top_builddir"; then ac_top_srcdir=. else ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` fi ;; [\\/]* | ?:[\\/]* ) # Absolute path. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ;; *) # Relative path. ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_builddir$srcdir ;; esac # Do not use `cd foo && pwd` to compute absolute paths, because # the directories may not exist. case `pwd` in .) ac_abs_builddir="$ac_dir";; *) case "$ac_dir" in .) ac_abs_builddir=`pwd`;; [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; *) ac_abs_builddir=`pwd`/"$ac_dir";; esac;; esac case $ac_abs_builddir in .) ac_abs_top_builddir=${ac_top_builddir}.;; *) case ${ac_top_builddir}. in .) ac_abs_top_builddir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; esac;; esac case $ac_abs_builddir in .) ac_abs_srcdir=$ac_srcdir;; *) case $ac_srcdir in .) ac_abs_srcdir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; esac;; esac case $ac_abs_builddir in .) ac_abs_top_srcdir=$ac_top_srcdir;; *) case $ac_top_srcdir in .) ac_abs_top_srcdir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; esac;; esac { echo "$as_me:$LINENO: executing $ac_dest commands" >&5 echo "$as_me: executing $ac_dest commands" >&6;} case $ac_dest in depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named `Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # So let's grep whole file. if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then dirpart=`(dirname "$mf") 2>/dev/null || $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$mf" : 'X\(//\)[^/]' \| \ X"$mf" : 'X\(//\)$' \| \ X"$mf" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$mf" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` else continue fi grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue # Extract the definition of DEP_FILES from the Makefile without # running `make'. DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"` test -z "$DEPDIR" && continue # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n -e '/^U = / s///p' < "$mf"` test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" # We invoke sed twice because it is the simplest approach to # changing $(DEPDIR) to its actual value in the expansion. for file in `sed -n -e ' /^DEP_FILES = .*\\\\$/ { s/^DEP_FILES = // :loop s/\\\\$// p n /\\\\$/ b loop p } /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`(dirname "$file") 2>/dev/null || $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$file" : 'X\(//\)[^/]' \| \ X"$file" : 'X\(//\)$' \| \ X"$file" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` { if $as_mkdir_p; then mkdir -p $dirpart/$fdir else as_dir=$dirpart/$fdir as_dirs= while test ! -d "$as_dir"; do as_dirs="$as_dir $as_dirs" as_dir=`(dirname "$as_dir") 2>/dev/null || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` done test ! -n "$as_dirs" || mkdir $as_dirs fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5 echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;} { (exit 1); exit 1; }; }; } # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done ;; esac done _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF { (exit 0); exit 0; } _ACEOF chmod +x $CONFIG_STATUS ac_clean_files=$ac_clean_files_save # configure is writing to config.log, and then calls config.status. # config.status does its own redirection, appending to config.log. # Unfortunately, on DOS this fails, as config.log is still kept open # by configure, so config.status won't be able to write to it; its # output is simply discarded. So we exec the FD to /dev/null, # effectively closing config.log, so it can be properly (re)opened and # appended to by config.status. When coming back to configure, we # need to make the FD available again. if test "$no_create" != yes; then ac_cs_success=: ac_config_status_args= test "$silent" = yes && ac_config_status_args="$ac_config_status_args --quiet" exec 5>/dev/null $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. $ac_cs_success || { (exit 1); exit 1; } fi teepeedee-0.3.0/AUTHORS0000664000175000017500000000010107600570464010172 teepeedee was entirely written by John Fremlin teepeedee-0.3.0/COPYING0000664000175000017500000004311007600570464010164 GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Library General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow. GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you". Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does. 1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License. c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following: a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. Copyright (C) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Also add information on how to contact you by electronic and paper mail. If the program is interactive, make it output a short notice like this when it starts in an interactive mode: Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details. The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than `show w' and `show c'; they could even be mouse-clicks or menu items--whatever suits your program. You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' (which makes passes at compilers) written by James Hacker. , 1 April 1989 Ty Coon, President of Vice This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Library General Public License instead of this License. teepeedee-0.3.0/ChangeLog0000664000175000017500000001250510006060066010671 2004-01-29 John Fremlin * src/httpcontrol.cc (authenticate): set timeout however authentication occurs 2004-01-28 John Fremlin * src/control.cc (increment): Now actually increment things * lib/streamtable.cc (poll): check timeouts also on non-fd connections (do_remove): catch exceptions thrown in delete 2004-01-15 John Fremlin * lib/conftree.hh (class ConfTree): check that things were written correctly * lib/iocontext.hh (class IOContext): removed hangup as it was wrong and never used * lib/streamtable.cc (poll): added timeout check * src/ftpcontrol.cc (passive_on): Set a timeout on the data listener * lib/iocontextxfer.hh (class IOContextXfer): added limit_xfer, which calls made_progress when sendfile xfers some bytes 2003-06-21 John Fremlin * src/ftpcontrol.cc (passive_off): call _data_listener->detach to avoid segfault 2003-06-10 John Fremlin * src/serverssl.hh (read_config): do not commit suicide on failure * src/ftpcontrol.cc (~FTPControl): when FTPControl dies, tell dependents 2003-05-24 John Fremlin * lib/stream.cc (listen_queue_length): raised to 128 2003-05-23 John Fremlin * src/user.cc (message_directory): changed .index to more std .message 2003-05-21 John Fremlin * lib/sendfile.cc (io): added SENDFILE_FUNCTION_PRESENT define for libc 2.2 on Linux x86 which has the sendfile function but which cannot be used because it does not have a 64bit off_t version * lib/stream.hh: fixed FreeBSD compilation by including sys/socket.h 2003-05-20 John Fremlin * lib/streamfd.hh (class StreamFD): when deleting StreamFD do shutdown not close * lib/iocontextxfer.hh (class IOContextXfer): only do_io if the stream matches * lib/sendfile.cc (system_sendfile): add EAGAIN to acceptable sendfile errnos 2003-05-19 John Fremlin * lib/iocontextopenssl.hh (class IOContextOpenSSL): changed so does not use an internal buffer anymore 2003-03-08 John Fremlin * src/ftpcontrol.cc: help for specific commands 2003-02-11 John Fremlin * src/ftpcontrol.cc (cmd_port): removed unnecessary assert_no_xfer which screws up some ftp clients 2003-01-28 John Fremlin * configure.in: added AC_SYS_LARGEFILE to automatically support large files stop using config.h as not all files include it * lib/sendfile.cc (io): refactored into read_in and write_out * lib/sendfile.hh (class Sendfile ): increased buffer size 2003-01-19 John Fremlin * src/ftpmlstprinter.hh (class FTPMlstPrinter): add a / at the beginning of filenames to confirm more properly to the spec 2003-01-18 John Fremlin * src/ftpcontrol.cc (FTPControl): clear _port_addr before doing getsockname in case of failure 2003-01-17 John Fremlin * lib/iocontext.cc (getsockname): no longer refs desc in error case to avoid infinite recursion (bind_ipv4): clear sockaddr_in to 0 before we bind for NetBSD * lib/iocontextresponder.cc (report_connect): add timestamp * lib/iocontextresponder.hh (set_fd): added to call report_connect * src/user.cc (authenticate): return already if password_plain does not match given password * lib/dircontainer.cc (readdir_r): implement a readdir_r for netbsd * configure.in: check for presence of no sendfile function * lib/sendfile.cc (system_sendfile): added version for systems without any sendfile * lib/conftree.hh (class ConfTree): renamed get(...,std::time_t) to get_seconds to help it compile on NetBSD/alpha 2002-12-31 John Fremlin * lib/iocontextresponder.cc (report_connect): added * src/server.cc (read_config): use reuse_addr * lib/xfertable.cc (check_timeouts): moved out of do_poll * lib/iocontext.cc (sockaddr_to_str): remove pointless '\0' 2002-12-30 John Fremlin * lib/iocontext.hh (class IOContext): do not call timedout wrongly * lib/iocontext.cc (set_reuse_addr): added * lib/iocontextresponder.cc (read_in): hangup on EOF (io): handle hangup in read_in * lib/listener.cc (io): loop round accept 2002-12-21 John Fremlin * lib/iocontext.cc (getsockname): fix error reporting * src/ftplistlong.cc (prepare_entry): pad out listing items to make them more readable [reported by Felix von Leitner] * src/httpcontrol.cc (do_cmd_get): add Content-Type to directory listings [reported by Felix von Leitner] 2002-12-20 John Fremlin * src/ftpcontrol.cc (do_cmd_list): ignore ls(1) options (finished_reading): more viciously strip control sequences * src/httplist.cc (prepare_entry): add initial "/" so as not to confuse browsers * lib/iocontextxfer.cc (hangup): fixed problem where buffered data would not be written out due to data connection hanging up * src/httpcontrol.cc (persistant): fixed order of tests * lib/iocontext.cc (getpeername): added * lib/iocontextresponder.cc (read_done): added logging * src/ftpcontrol.cc: made cmd_help tell more (do_cmd_list): add globbing * lib/filelisterglob.hh: added 2002-12-19 John Fremlin * lib/sendfile.cc: Fixed filedescriptor leak * src/ftpcontrol.cc (FTPControl): Fixed lack of braces round PASV mode port string - doh! teepeedee-0.3.0/INSTALL0000664000175000017500000002203007600570464010160 Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software Foundation, Inc. This file is free documentation; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. Basic Installation ================== These are generic installation instructions. The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses those values to create a `Makefile' in each directory of the package. It may also create one or more `.h' files containing system-dependent definitions. Finally, it creates a shell script `config.status' that you can run in the future to recreate the current configuration, and a file `config.log' containing compiler output (useful mainly for debugging `configure'). It can also use an optional file (typically called `config.cache' and enabled with `--cache-file=config.cache' or simply `-C') that saves the results of its tests to speed up reconfiguring. (Caching is disabled by default to prevent problems with accidental use of stale cache files.) If you need to do unusual things to compile the package, please try to figure out how `configure' could check whether to do them, and mail diffs or instructions to the address given in the `README' so they can be considered for the next release. If you are using the cache, and at some point `config.cache' contains results you don't want to keep, you may remove or edit it. The file `configure.ac' (or `configure.in') is used to create `configure' by a program called `autoconf'. You only need `configure.ac' if you want to change it or regenerate `configure' using a newer version of `autoconf'. The simplest way to compile this package is: 1. `cd' to the directory containing the package's source code and type `./configure' to configure the package for your system. If you're using `csh' on an old version of System V, you might need to type `sh ./configure' instead to prevent `csh' from trying to execute `configure' itself. Running `configure' takes awhile. While running, it prints some messages telling which features it is checking for. 2. Type `make' to compile the package. 3. Optionally, type `make check' to run any self-tests that come with the package. 4. Type `make install' to install the programs and any data files and documentation. 5. You can remove the program binaries and object files from the source code directory by typing `make clean'. To also remove the files that `configure' created (so you can compile the package for a different kind of computer), type `make distclean'. There is also a `make maintainer-clean' target, but that is intended mainly for the package's developers. If you use it, you may have to get all sorts of other programs in order to regenerate files that came with the distribution. Compilers and Options ===================== Some systems require unusual options for compilation or linking that the `configure' script does not know about. Run `./configure --help' for details on some of the pertinent environment variables. You can give `configure' initial values for configuration parameters by setting variables in the command line or in the environment. Here is an example: ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix *Note Defining Variables::, for more details. Compiling For Multiple Architectures ==================================== You can compile the package for more than one kind of computer at the same time, by placing the object files for each architecture in their own directory. To do this, you must use a version of `make' that supports the `VPATH' variable, such as GNU `make'. `cd' to the directory where you want the object files and executables to go and run the `configure' script. `configure' automatically checks for the source code in the directory that `configure' is in and in `..'. If you have to use a `make' that does not support the `VPATH' variable, you have to compile the package for one architecture at a time in the source code directory. After you have installed the package for one architecture, use `make distclean' before reconfiguring for another architecture. Installation Names ================== By default, `make install' will install the package's files in `/usr/local/bin', `/usr/local/man', etc. You can specify an installation prefix other than `/usr/local' by giving `configure' the option `--prefix=PATH'. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you give `configure' the option `--exec-prefix=PATH', the package will use PATH as the prefix for installing programs and libraries. Documentation and other data files will still use the regular prefix. In addition, if you use an unusual directory layout you can give options like `--bindir=PATH' to specify different values for particular kinds of files. Run `configure --help' for a list of the directories you can set and what kinds of files go in them. If the package supports it, you can cause programs to be installed with an extra prefix or suffix on their names by giving `configure' the option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. Optional Features ================= Some packages pay attention to `--enable-FEATURE' options to `configure', where FEATURE indicates an optional part of the package. They may also pay attention to `--with-PACKAGE' options, where PACKAGE is something like `gnu-as' or `x' (for the X Window System). The `README' should mention any `--enable-' and `--with-' options that the package recognizes. For packages that use the X Window System, `configure' can usually find the X include and library files automatically, but if it doesn't, you can use the `configure' options `--x-includes=DIR' and `--x-libraries=DIR' to specify their locations. Specifying the System Type ========================== There may be some features `configure' cannot figure out automatically, but needs to determine by the type of machine the package will run on. Usually, assuming the package is built to be run on the _same_ architectures, `configure' can figure that out, but if it prints a message saying it cannot guess the machine type, give it the `--build=TYPE' option. TYPE can either be a short name for the system type, such as `sun4', or a canonical name which has the form: CPU-COMPANY-SYSTEM where SYSTEM can have one of these forms: OS KERNEL-OS See the file `config.sub' for the possible values of each field. If `config.sub' isn't included in this package, then this package doesn't need to know the machine type. If you are _building_ compiler tools for cross-compiling, you should use the `--target=TYPE' option to select the type of system they will produce code for. If you want to _use_ a cross compiler, that generates code for a platform different from the build platform, you should specify the "host" platform (i.e., that on which the generated programs will eventually be run) with `--host=TYPE'. Sharing Defaults ================ If you want to set default values for `configure' scripts to share, you can create a site shell script called `config.site' that gives default values for variables like `CC', `cache_file', and `prefix'. `configure' looks for `PREFIX/share/config.site' if it exists, then `PREFIX/etc/config.site' if it exists. Or, you can set the `CONFIG_SITE' environment variable to the location of the site script. A warning: not all `configure' scripts look for a site script. Defining Variables ================== Variables not defined in a site shell script can be set in the environment passed to `configure'. However, some packages may run configure again during the build, and the customized values of these variables may be lost. In order to avoid this problem, you should set them in the `configure' command line, using `VAR=value'. For example: ./configure CC=/usr/local2/bin/gcc will cause the specified gcc to be used as the C compiler (unless it is overridden in the site shell script). `configure' Invocation ====================== `configure' recognizes the following options to control how it operates. `--help' `-h' Print a summary of the options to `configure', and exit. `--version' `-V' Print the version of Autoconf used to generate the `configure' script, and exit. `--cache-file=FILE' Enable the cache: use and save the results of the tests in FILE, traditionally `config.cache'. FILE defaults to `/dev/null' to disable caching. `--config-cache' `-C' Alias for `--cache-file=config.cache'. `--quiet' `--silent' `-q' Do not print messages saying which checks are being made. To suppress all normal output, redirect it to `/dev/null' (any error messages will still be shown). `--srcdir=DIR' Look for the package's source code in directory DIR. Usually `configure' can determine that directory automatically. `configure' also accepts some other, not widely useful, options. Run `configure --help' for more details. teepeedee-0.3.0/NEWS0000664000175000017500000000111710006060067007614 * 20021225: version 0.1.1 released! * 20021225: version 0.1.2 with some tweaks for directory listings * 20030109: version 0.1.3 now with logging and timeout fixes * ?: version 0.1.4 supports NetBSD * 20030524: version 0.2.0: Now with transfer limits, login limits, greeting messages, directory messages, HTTPS support. FTP enhancements: EPRT,EPSV support, AUTH TLS support. Also documented configuration. * 20040115: version 0.2.1: Fixed timeout handling * 20040129: version 0.3.0: Rewritten configuration mechanism New teepeedee-share script to automatically create a configurationteepeedee-0.3.0/TODO0000664000175000017500000000140407663537155007632 * document options * performance test * fix sendfile * poll on linux takes at least one jiffy, so max rate with 64 KB buffers is 64 KB * HZ - to solve this bottleneck could use mmap (but the address space is limited) - could use varying buffer sizes * ssl does not need a separate buffer * http content-range resume * generally make more http spec compliant * http name based virtual hosts * test harder * safely bind to privileged ports * smp optimization * maybe add realpath checking * do something about brute force password attacks * add rate limiting * catch out of memory conditions * reduce the number of stat syscalls * conftree cache? * IPv6 * implement ftp STAT properly * implement ftp OPTS * implement ftp ssl PROT * fix ftp REIN to close ssl connection teepeedee-0.3.0/depcomp0000755000175000017500000003477110006067573010515 #! /bin/sh # depcomp - compile a program generating dependencies as side-effects scriptversion=2003-11-08.23 # Copyright (C) 1999, 2000, 2003 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Originally written by Alexandre Oliva . case $1 in '') echo "$0: No command. Try \`$0 --help' for more information." 1>&2 exit 1; ;; -h | --h*) cat <<\EOF Usage: depcomp [--help] [--version] PROGRAM [ARGS] Run PROGRAMS ARGS to compile a file, generating dependencies as side-effects. Environment variables: depmode Dependency tracking mode. source Source file read by `PROGRAMS ARGS'. object Object file output by `PROGRAMS ARGS'. depfile Dependency file to output. tmpdepfile Temporary file to use when outputing dependencies. libtool Whether libtool is used (yes/no). Report bugs to . EOF exit 0 ;; -v | --v*) echo "depcomp $scriptversion" exit 0 ;; esac if test -z "$depmode" || test -z "$source" || test -z "$object"; then echo "depcomp: Variables source, object and depmode must be set" 1>&2 exit 1 fi # `libtool' can also be set to `yes' or `no'. if test -z "$depfile"; then base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'` dir=`echo "$object" | sed 's,/.*$,/,'` if test "$dir" = "$object"; then dir= fi # FIXME: should be _deps on DOS. depfile="$dir.deps/$base" fi tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} rm -f "$tmpdepfile" # Some modes work just like other modes, but use different flags. We # parameterize here, but still list the modes in the big case below, # to make depend.m4 easier to write. Note that we *cannot* use a case # here, because this file can only contain one case statement. if test "$depmode" = hp; then # HP compiler uses -M and no extra arg. gccflag=-M depmode=gcc fi if test "$depmode" = dashXmstdout; then # This is just like dashmstdout with a different argument. dashmflag=-xM depmode=dashmstdout fi case "$depmode" in gcc3) ## gcc 3 implements dependency tracking that does exactly what ## we want. Yay! Note: for some reason libtool 1.4 doesn't like ## it if -MD -MP comes after the -MF stuff. Hmm. "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi mv "$tmpdepfile" "$depfile" ;; gcc) ## There are various ways to get dependency output from gcc. Here's ## why we pick this rather obscure method: ## - Don't want to use -MD because we'd like the dependencies to end ## up in a subdir. Having to rename by hand is ugly. ## (We might end up doing this anyway to support other compilers.) ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like ## -MM, not -M (despite what the docs say). ## - Using -M directly means running the compiler twice (even worse ## than renaming). if test -z "$gccflag"; then gccflag=-MD, fi "$@" -Wp,"$gccflag$tmpdepfile" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" echo "$object : \\" > "$depfile" alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz ## The second -e expression handles DOS-style file names with drive letters. sed -e 's/^[^:]*: / /' \ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" ## This next piece of magic avoids the `deleted header file' problem. ## The problem is that when a header file which appears in a .P file ## is deleted, the dependency causes make to die (because there is ## typically no way to rebuild the header). We avoid this by adding ## dummy dependencies for each header file. Too bad gcc doesn't do ## this for us directly. tr ' ' ' ' < "$tmpdepfile" | ## Some versions of gcc put a space before the `:'. On the theory ## that the space means something, we add a space to the output as ## well. ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; sgi) if test "$libtool" = yes; then "$@" "-Wp,-MDupdate,$tmpdepfile" else "$@" -MDupdate "$tmpdepfile" fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files echo "$object : \\" > "$depfile" # Clip off the initial element (the dependent). Don't try to be # clever and replace this with sed code, as IRIX sed won't handle # lines with more than a fixed number of characters (4096 in # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; # the IRIX cc adds comments like `#:fec' to the end of the # dependency line. tr ' ' ' ' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ tr ' ' ' ' >> $depfile echo >> $depfile # The second pass generates a dummy entry for each header file. tr ' ' ' ' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ >> $depfile else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile # "include basename.Plo" scheme. echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; aix) # The C for AIX Compiler uses -M and outputs the dependencies # in a .u file. In older versions, this file always lives in the # current directory. Also, the AIX compiler puts `$object:' at the # start of each line; $object doesn't have directory information. # Version 6 uses the directory in both cases. stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'` tmpdepfile="$stripped.u" if test "$libtool" = yes; then "$@" -Wc,-M else "$@" -M fi stat=$? if test -f "$tmpdepfile"; then : else stripped=`echo "$stripped" | sed 's,^.*/,,'` tmpdepfile="$stripped.u" fi if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi if test -f "$tmpdepfile"; then outname="$stripped.o" # Each line is of the form `foo.o: dependent.h'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile" sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile" else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile # "include basename.Plo" scheme. echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; icc) # Intel's C compiler understands `-MD -MF file'. However on # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c # ICC 7.0 will fill foo.d with something like # foo.o: sub/foo.c # foo.o: sub/foo.h # which is wrong. We want: # sub/foo.o: sub/foo.c # sub/foo.o: sub/foo.h # sub/foo.c: # sub/foo.h: # ICC 7.1 will output # foo.o: sub/foo.c sub/foo.h # and will wrap long lines using \ : # foo.o: sub/foo.c ... \ # sub/foo.h ... \ # ... "$@" -MD -MF "$tmpdepfile" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" # Each line is of the form `foo.o: dependent.h', # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process this invocation # correctly. Breaking it into two sed invocations is a workaround. sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; tru64) # The Tru64 compiler uses -MD to generate dependencies as a side # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put # dependencies in `foo.d' instead, so we check for that too. # Subdirectories are respected. dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` test "x$dir" = "x$object" && dir= base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` if test "$libtool" = yes; then tmpdepfile1="$dir.libs/$base.lo.d" tmpdepfile2="$dir.libs/$base.d" "$@" -Wc,-MD else tmpdepfile1="$dir$base.o.d" tmpdepfile2="$dir$base.d" "$@" -MD fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile1" "$tmpdepfile2" exit $stat fi if test -f "$tmpdepfile1"; then tmpdepfile="$tmpdepfile1" else tmpdepfile="$tmpdepfile2" fi if test -f "$tmpdepfile"; then sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" # That's a tab and a space in the []. sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" else echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; #nosideeffect) # This comment above is used by automake to tell side-effect # dependency tracking mechanisms from slower ones. dashmstdout) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout, regardless of -o. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test $1 != '--mode=compile'; do shift done shift fi # Remove `-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done test -z "$dashmflag" && dashmflag=-M # Require at least two characters before searching for `:' # in the target name. This is to cope with DOS-style filenames: # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. "$@" $dashmflag | sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" tr ' ' ' ' < "$tmpdepfile" | \ ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; dashXmstdout) # This case only exists to satisfy depend.m4. It is never actually # run, as this mode is specially recognized in the preamble. exit 1 ;; makedepend) "$@" || exit $? # Remove any Libtool call if test "$libtool" = yes; then while test $1 != '--mode=compile'; do shift done shift fi # X makedepend shift cleared=no for arg in "$@"; do case $cleared in no) set ""; shift cleared=yes ;; esac case "$arg" in -D*|-I*) set fnord "$@" "$arg"; shift ;; # Strip any option that makedepend may not understand. Remove # the object too, otherwise makedepend will parse it as a source file. -*|$object) ;; *) set fnord "$@" "$arg"; shift ;; esac done obj_suffix="`echo $object | sed 's/^.*\././'`" touch "$tmpdepfile" ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" sed '1,2d' "$tmpdepfile" | tr ' ' ' ' | \ ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" "$tmpdepfile".bak ;; cpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test $1 != '--mode=compile'; do shift done shift fi # Remove `-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done "$@" -E | sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | sed '$ s: \\$::' > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" cat < "$tmpdepfile" >> "$depfile" sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; msvisualcpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout, regardless of -o, # because we must use -o when running libtool. "$@" || exit $? IFS=" " for arg do case "$arg" in "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") set fnord "$@" shift shift ;; *) set fnord "$@" "$arg" shift shift ;; esac done "$@" -E | sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" echo " " >> "$depfile" . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile" rm -f "$tmpdepfile" ;; none) exec "$@" ;; *) echo "Unknown depmode $depmode" 1>&2 exit 1 ;; esac exit 0 # Local Variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-end: "$" # End: teepeedee-0.3.0/install-sh0000755000175000017500000002143210006067572011131 #!/bin/sh # install - install a program, script, or datafile scriptversion=2004-01-12.10 # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the # following copyright and license. # # Copyright (C) 1994 X Consortium # # Permission is hereby granted, free of charge, to any person obtaining a copy # of this software and associated documentation files (the "Software"), to # deal in the Software without restriction, including without limitation the # rights to use, copy, modify, merge, publish, distribute, sublicense, and/or # sell copies of the Software, and to permit persons to whom the Software is # furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE # X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN # AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- # TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. # # Except as contained in this notice, the name of the X Consortium shall not # be used in advertising or otherwise to promote the sale, use or other deal- # ings in this Software without prior written authorization from the X Consor- # tium. # # # FSF changes to this file are in the public domain. # # Calling this script install-sh is preferred over install.sh, to prevent # `make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written # from scratch. It can only install one file at a time, a restriction # shared with many OS's install programs. # set DOITPROG to echo to test this script # Don't use :- since 4.3BSD and earlier shells don't like it. doit="${DOITPROG-}" # put in absolute paths if you don't have them in your path; or use env. vars. mvprog="${MVPROG-mv}" cpprog="${CPPROG-cp}" chmodprog="${CHMODPROG-chmod}" chownprog="${CHOWNPROG-chown}" chgrpprog="${CHGRPPROG-chgrp}" stripprog="${STRIPPROG-strip}" rmprog="${RMPROG-rm}" mkdirprog="${MKDIRPROG-mkdir}" transformbasename= transform_arg= instcmd="$mvprog" chmodcmd="$chmodprog 0755" chowncmd= chgrpcmd= stripcmd= rmcmd="$rmprog -f" mvcmd="$mvprog" src= dst= dir_arg= usage="Usage: $0 [OPTION]... SRCFILE DSTFILE or: $0 [OPTION]... SRCFILES... DIRECTORY or: $0 -d DIRECTORIES... In the first form, install SRCFILE to DSTFILE, removing SRCFILE by default. In the second, create the directory path DIR. Options: -b=TRANSFORMBASENAME -c copy source (using $cpprog) instead of moving (using $mvprog). -d create directories instead of installing files. -g GROUP $chgrp installed files to GROUP. -m MODE $chmod installed files to MODE. -o USER $chown installed files to USER. -s strip installed files (using $stripprog). -t=TRANSFORM --help display this help and exit. --version display version info and exit. Environment variables override the default commands: CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG " while test -n "$1"; do case $1 in -b=*) transformbasename=`echo $1 | sed 's/-b=//'` shift continue;; -c) instcmd=$cpprog shift continue;; -d) dir_arg=true shift continue;; -g) chgrpcmd="$chgrpprog $2" shift shift continue;; --help) echo "$usage"; exit 0;; -m) chmodcmd="$chmodprog $2" shift shift continue;; -o) chowncmd="$chownprog $2" shift shift continue;; -s) stripcmd=$stripprog shift continue;; -t=*) transformarg=`echo $1 | sed 's/-t=//'` shift continue;; --version) echo "$0 $scriptversion"; exit 0;; *) # When -d is used, all remaining arguments are directories to create. test -n "$dir_arg" && break # Otherwise, the last argument is the destination. Remove it from $@. for arg do if test -n "$dstarg"; then # $@ is not empty: it contains at least $arg. set fnord "$@" "$dstarg" shift # fnord fi shift # arg dstarg=$arg done break;; esac done if test -z "$1"; then if test -z "$dir_arg"; then echo "$0: no input file specified." >&2 exit 1 fi # It's OK to call `install-sh -d' without argument. # This can happen when creating conditional directories. exit 0 fi for src do # Protect names starting with `-'. case $src in -*) src=./$src ;; esac if test -n "$dir_arg"; then dst=$src src= if test -d "$dst"; then instcmd=: chmodcmd= else instcmd=$mkdirprog fi else # Waiting for this to be detected by the "$instcmd $src $dsttmp" command # might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. if test ! -f "$src" && test ! -d "$src"; then echo "$0: $src does not exist." >&2 exit 1 fi if test -z "$dstarg"; then echo "$0: no destination specified." >&2 exit 1 fi dst=$dstarg # Protect names starting with `-'. case $dst in -*) dst=./$dst ;; esac # If destination is a directory, append the input filename; won't work # if double slashes aren't ignored. if test -d "$dst"; then dst=$dst/`basename "$src"` fi fi # This sed command emulates the dirname command. dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` # Make sure that the destination directory exists. # Skip lots of stat calls in the usual case. if test ! -d "$dstdir"; then defaultIFS=' ' IFS="${IFS-$defaultIFS}" oIFS=$IFS # Some sh's can't handle IFS=/ for some reason. IFS='%' set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'` IFS=$oIFS pathcomp= while test $# -ne 0 ; do pathcomp=$pathcomp$1 shift test -d "$pathcomp" || $mkdirprog "$pathcomp" pathcomp=$pathcomp/ done fi if test -n "$dir_arg"; then $doit $instcmd "$dst" \ && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \ && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \ && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; } else # If we're going to rename the final executable, determine the name now. if test -z "$transformarg"; then dstfile=`basename "$dst"` else dstfile=`basename "$dst" $transformbasename \ | sed $transformarg`$transformbasename fi # don't allow the sed command to completely eliminate the filename. test -z "$dstfile" && dstfile=`basename "$dst"` # Make a couple of temp file names in the proper directory. dsttmp=$dstdir/_inst.$$_ rmtmp=$dstdir/_rm.$$_ # Trap to clean up those temp files at exit. trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0 trap '(exit $?); exit' 1 2 13 15 # Move or copy the file name to the temp name $doit $instcmd "$src" "$dsttmp" && # and set any options; do chmod last to preserve setuid bits. # # If any of these fail, we abort the whole thing. If we want to # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $instcmd $src $dsttmp" command. # { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \ && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \ && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } && # Now remove or move aside any old file at destination location. We # try this two ways since rm can't unlink itself on some systems and # the destination file might be busy for other reasons. In this case, # the final cleanup might fail but the new file should still install # successfully. { if test -f "$dstdir/$dstfile"; then $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \ || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \ || { echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2 (exit 1); exit } else : fi } && # Now rename the file to the real destination. $doit $mvcmd "$dsttmp" "$dstdir/$dstfile" fi || { (exit 1); exit; } done # The final little trick to "correctly" pass the exit status to the exit trap. { (exit 0); exit } # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-end: "$" # End: teepeedee-0.3.0/missing0000755000175000017500000002466610006067572010540 #! /bin/sh # Common stub for a few missing GNU programs while installing. scriptversion=2003-09-02.23 # Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003 # Free Software Foundation, Inc. # Originally by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. if test $# -eq 0; then echo 1>&2 "Try \`$0 --help' for more information" exit 1 fi run=: # In the cases where this matters, `missing' is being run in the # srcdir already. if test -f configure.ac; then configure_ac=configure.ac else configure_ac=configure.in fi msg="missing on your system" case "$1" in --run) # Try to run requested program, and just exit if it succeeds. run= shift "$@" && exit 0 # Exit code 63 means version mismatch. This often happens # when the user try to use an ancient version of a tool on # a file that requires a minimum version. In this case we # we should proceed has if the program had been absent, or # if --run hadn't been passed. if test $? = 63; then run=: msg="probably too old" fi ;; esac # If it does not exist, or fails to run (possibly an outdated version), # try to emulate it. case "$1" in -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an error status if there is no known handling for PROGRAM. Options: -h, --help display this help and exit -v, --version output version information and exit --run try to run the given command, and emulate it if it fails Supported PROGRAM values: aclocal touch file \`aclocal.m4' autoconf touch file \`configure' autoheader touch file \`config.h.in' automake touch all \`Makefile.in' files bison create \`y.tab.[ch]', if possible, from existing .[ch] flex create \`lex.yy.c', if possible, from existing .c help2man touch the output file lex create \`lex.yy.c', if possible, from existing .c makeinfo touch the output file tar try tar, gnutar, gtar, then tar without non-portable flags yacc create \`y.tab.[ch]', if possible, from existing .[ch] Send bug reports to ." ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) echo "missing $scriptversion (GNU Automake)" ;; -*) echo 1>&2 "$0: Unknown \`$1' option" echo 1>&2 "Try \`$0 --help' for more information" exit 1 ;; aclocal*) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." touch aclocal.m4 ;; autoconf) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." touch configure ;; autoheader) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`acconfig.h' or \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` test -z "$files" && files="config.h" touch_files= for f in $files; do case "$f" in *:*) touch_files="$touch_files "`echo "$f" | sed -e 's/^[^:]*://' -e 's/:.*//'`;; *) touch_files="$touch_files $f.in";; esac done touch $touch_files ;; automake*) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." find . -type f -name Makefile.am -print | sed 's/\.am$/.in/' | while read f; do touch "$f"; done ;; autom4te) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is needed, but is $msg. You might have modified some files without having the proper tools for further handling them. You can get \`$1' as part of \`Autoconf' from any GNU archive site." file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'` test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'` if test -f "$file"; then touch $file else test -z "$file" || exec >$file echo "#! /bin/sh" echo "# Created by GNU Automake missing as a replacement of" echo "# $ $@" echo "exit 0" chmod +x $file exit 1 fi ;; bison|yacc) echo 1>&2 "\ WARNING: \`$1' $msg. You should only need it if you modified a \`.y' file. You may need the \`Bison' package in order for those modifications to take effect. You can get \`Bison' from any GNU archive site." rm -f y.tab.c y.tab.h if [ $# -ne 1 ]; then eval LASTARG="\${$#}" case "$LASTARG" in *.y) SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` if [ -f "$SRCFILE" ]; then cp "$SRCFILE" y.tab.c fi SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` if [ -f "$SRCFILE" ]; then cp "$SRCFILE" y.tab.h fi ;; esac fi if [ ! -f y.tab.h ]; then echo >y.tab.h fi if [ ! -f y.tab.c ]; then echo 'main() { return 0; }' >y.tab.c fi ;; lex|flex) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a \`.l' file. You may need the \`Flex' package in order for those modifications to take effect. You can get \`Flex' from any GNU archive site." rm -f lex.yy.c if [ $# -ne 1 ]; then eval LASTARG="\${$#}" case "$LASTARG" in *.l) SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` if [ -f "$SRCFILE" ]; then cp "$SRCFILE" lex.yy.c fi ;; esac fi if [ ! -f lex.yy.c ]; then echo 'main() { return 0; }' >lex.yy.c fi ;; help2man) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a dependency of a manual page. You may need the \`Help2man' package in order for those modifications to take effect. You can get \`Help2man' from any GNU archive site." file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` if test -z "$file"; then file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'` fi if [ -f "$file" ]; then touch $file else test -z "$file" || exec >$file echo ".ab help2man is required to generate this page" exit 1 fi ;; makeinfo) if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then # We have makeinfo, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a \`.texi' or \`.texinfo' file, or any other file indirectly affecting the aspect of the manual. The spurious call might also be the consequence of using a buggy \`make' (AIX, DU, IRIX). You might want to install the \`Texinfo' package or the \`GNU make' package. Grab either from any GNU archive site." file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` if test -z "$file"; then file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file` fi touch $file ;; tar) shift if test -n "$run"; then echo 1>&2 "ERROR: \`tar' requires --run" exit 1 fi # We have already tried tar in the generic part. # Look for gnutar/gtar before invocation to avoid ugly error # messages. if (gnutar --version > /dev/null 2>&1); then gnutar "$@" && exit 0 fi if (gtar --version > /dev/null 2>&1); then gtar "$@" && exit 0 fi firstarg="$1" if shift; then case "$firstarg" in *o*) firstarg=`echo "$firstarg" | sed s/o//` tar "$firstarg" "$@" && exit 0 ;; esac case "$firstarg" in *h*) firstarg=`echo "$firstarg" | sed s/h//` tar "$firstarg" "$@" && exit 0 ;; esac fi echo 1>&2 "\ WARNING: I can't seem to be able to run \`tar' with the given arguments. You may want to install GNU tar or Free paxutils, or check the command line arguments." exit 1 ;; *) echo 1>&2 "\ WARNING: \`$1' is needed, and is $msg. You might have modified some files without having the proper tools for further handling them. Check the \`README' file, it often tells you about the needed prerequisites for installing this package. You may also peek at any GNU archive site, in case some other package would contain this missing \`$1' program." exit 1 ;; esac exit 0 # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-end: "$" # End: teepeedee-0.3.0/bootstrap0000775000175000017500000000023707600570464011077 #! /bin/sh aclocal autoheader automake --gnu --add-missing --copy autoconf CFLAGS="$CFLAGS -ggdb3 -Wall" CXXFLAGS="$CXXFLAGS -ggdb3 -Wall" ./configure $@ teepeedee-0.3.0/lib/0002777000175000017500000000000010006067603007752 5teepeedee-0.3.0/lib/streamtable.hh0000664000175000017500000000304610006060067012512 #ifndef _TEEPEEDEE_LIB_STREAMTABLE_HH #define _TEEPEEDEE_LIB_STREAMTABLE_HH #include #include #include #include #include #include "streamcontainer.hh" class Stream; class StreamFD; class IOContext; class StreamTable:public StreamContainer { typedef std::list _streams_type; _streams_type _streams; typedef std::list _nonfd_streams_type; _nonfd_streams_type _nonfd_streams; typedef std::map _fd_to_stream_type; _fd_to_stream_type _fd_to_stream; // note that an added stream might be deleted typedef std::set _deleted_streams_type; _deleted_streams_type _deleted_streams; typedef _deleted_streams_type _added_streams_type; _deleted_streams_type _added_streams; sig_atomic_t _async_notify; void free() ; void sow_and_reap() ; void remove(Stream*s) { _deleted_streams.insert(s); } void remove(IOContext*ioc) ; void do_remove(Stream*s) ; void do_add(Stream*s) ; bool do_events(Stream*s) ; bool tables_modified()const { return !_added_streams.empty() || !_deleted_streams.empty(); } StreamTable(const StreamTable&) { } public: StreamTable():_async_notify(0) { } void async_notify_stop() { _async_notify = 1; } void add(Stream*s) { _added_streams.insert(s); } void poll(int const*masked_signals); ~StreamTable() { free(); } bool empty()const { return _added_streams.empty()&&_streams.empty(); } }; #endif teepeedee-0.3.0/lib/iocontext.hh0000664000175000017500000000620210006060067012220 #ifndef _TEEPEEDEE_LIB_IOCONTEXT_HH #define _TEEPEEDEE_LIB_IOCONTEXT_HH #include #include #include #include "stream.hh" // An IOContext is a consumer of IO from a stream class IOContext { std::time_t _max_idle; std::time_t _timeout_time; IOContext(const IOContext&) { } void reset_timeout(std::time_t now) { set_timeout(now + _max_idle); } void set_timeout(std::time_t when) { _timeout_time = when; } bool has_timeout()const { return _max_idle; } std::time_t get_timeout()const { return _timeout_time; } protected: void made_progress() { reset_timeout(std::time(0)); } ssize_t do_read(Stream&stream,char*buffer,size_t size) { ssize_t ret = stream.read(buffer,size); if(ret != -1) made_progress(); else check_timeout(stream); return ret; } ssize_t do_write(Stream&stream,const char*buffer,size_t size) { ssize_t ret = stream.write(buffer,size); if(ret != -1) made_progress(); else check_timeout(stream); return ret; } Stream* do_accept(Stream&stream) { Stream* s = stream.accept(); if(s) made_progress(); else check_timeout(stream); return s; } virtual void read_in(Stream&stream,size_t max) { } virtual void write_out(Stream&stream,size_t max) { } virtual void timedout(Stream&stream) { delete_this(); } public: class Destroy { IOContext*_target; public: Destroy(IOContext*ioc):_target(ioc) { } IOContext* target() { return _target; } }; protected: void delete_this() { throw Destroy(this); } public: IOContext():_max_idle(0),_timeout_time(0) { } bool check_timeout(Stream&stream) { if(!has_timeout())return false; std::time_t limit = get_timeout(); std::time_t now = std::time(0); if(!limit){ reset_timeout(now); return false; } if(now > limit){ reset_timeout(now); timedout(stream); return true; } return false; } void read(Stream&stream,size_t max=0) { read_in(stream,max); } void write(Stream&stream,size_t max=0) { write_out(stream,max); } // can't make these const as e.g. iocontextwriter needs to do a bunch of stuff virtual bool want_write(Stream&stream) =0; virtual bool want_read(Stream&stream) =0; // Notifies IOContext that this related Stream is dead // true means that the STREAM was essential to the IOContext and the // IOContext sees no further purpose in life in light of the fact // that the Stream has died virtual bool stream_hungup(Stream&stream) { return true; } virtual std::string desc()const { return "consumer"; } void set_timeout_interval(std::time_t i) { _max_idle = i; _timeout_time = 0; } virtual void // this function is called by IOContextListener when a // connection is made and should not be used to do essential // stuff remote_stream(const Stream&stream) { } virtual ~IOContext() { } }; #endif teepeedee-0.3.0/lib/dircontainer.hh0000664000175000017500000000303307661461312012677 #ifndef _TEEPEEDEE_LIB_DIRCONTAINER_HH #define _TEEPEEDEE_LIB_DIRCONTAINER_HH #include #include #include #include class DirContainer { std::string _dir; public: DirContainer(const std::string& d):_dir(d) { }; std::string name()const { return _dir; } class iterator { DIR*_stream; struct dirent _entry; protected: friend class DirContainer; iterator(DIR*s):_stream(s) { read_next(); } void close() { if(_stream && closedir(_stream)) warn("closedir"); _stream=0; } void read_next() ; public: bool operator!()const { return !_stream; } int get_fd() { if(!_stream)return -1; return dirfd(_stream); } ~iterator() { close(); } std::string get_name()const { if(!_stream){ return std::string(); } return std::string(_entry.d_name); } std::string operator*()const { return get_name(); } iterator&operator++() { read_next(); return *this; } bool operator == (const iterator&i)const { if(!_stream || !i._stream)return (!_stream && !i._stream); return(*(*this) == *i); } bool operator != (const iterator&i)const { return !(*this == i); } }; iterator begin()const { DIR*d=opendir(_dir.c_str()); return iterator(d); } iterator end()const { return iterator(0); } }; #endif teepeedee-0.3.0/lib/conf.hh0000664000175000017500000000573010006060162011132 #ifndef _TEEPEEDEE_LIB_CONF_HH #define _TEEPEEDEE_LIB_CONF_HH #include #include #include #include #include #include #include // for uint32_t #include "confexception.hh" #include "confdb.hh" class IOContext; class Conf { ConfDB::Key _key; ConfDB mutable* _db; ConfDB& db()const { return *_db; } void get_seconds(const std::string&name,std::time_t&out)const ; ConfDB::Key db_key(const ConfDB::Key&k)const { return db().join_keys(_key,k); } public: Conf():_db(0) { } Conf(ConfDB&db,ConfDB::Key k = ConfDB::Key()): _key(k), _db(&db) { } Conf(const Conf&c,const ConfDB::Key& k): _key(c._key), _db(c._db) { key(db_key(k)); } void key(const ConfDB::Key&name) { _key = name; } bool exists(const ConfDB::Key&name) const { return db().exists(db_key(name)); } template void get_atomically_if_exists(const ConfDB::Key&name,T&val) { return get_if_exists(name,val); } template void get_if_exists(const ConfDB::Key&name,T&val) { if(!exists(name)) return; get(name,val); } void get(const ConfDB::Key&name,std::string&out)const { out = db().get(db_key(name)); } void get(const ConfDB::Key&name,bool&out)const { out = exists(name); } void get_line(const ConfDB::Key&name,std::string&val)const { get(name,val); val = val.substr(0,val.find('\n')); } void get_fsname(const ConfDB::Key&name,std::string&val)const { val = db().get_fsname(db_key(name)); } template void get(const ConfDB::Key&n,T&i)const { db().get_type(db_key(n),i); } template void put(const ConfDB::Key&name,const T& i) { db().put_type(db_key(name),i); } bool book_increment(const ConfDB::Key&value,ConfDB::Numeric increment=1) { return book_increment(value,value + "_max",increment); } bool//return true if increment +value is below max or max is 0 book_increment(const ConfDB::Key&value,const std::string&maximum,ConfDB::Numeric increment=1) { ConfDB::Numeric max = 0; get_if_exists(maximum,max); return book_increment(value,max,increment); } bool//return true if increment + value is below max or max is 0 book_increment(const ConfDB::Key&value,ConfDB::Numeric max,ConfDB::Numeric increment=1) { return db().increment(db_key(value),increment,max); } void book_decrement(const ConfDB::Key&value, ConfDB::Numeric decrement=1) { if(!db().decrement(db_key(value),decrement)) warnx("counter %s underflowed when being decremented",value.c_str()); } void get_ipv4_addr(const ConfDB::Key&name,uint32_t&inaddr)const; void get_timeout(const ConfDB::Key&name,IOContext&ioc)const; template void get_subkeys(T&container)const { db().get_subkeys(_key,container); } std::string get_name()const { return _key; } }; #endif teepeedee-0.3.0/lib/confdb.hh0000664000175000017500000000465210006060162011442 #ifndef _TEEPEEDEE_LIB_CONFDB_HH #define _TEEPEEDEE_LIB_CONFDB_HH #include #include #include #include #include "dircontainer.hh" #include "confexception.hh" class ConfDB { std::string _base; public: typedef off_t Numeric; // unsigned typedef std::string Key; private: class Value { std::string _contents; bool _changed; public: Value(const std::string&s=std::string(),bool c=false): _contents(s),_changed(c) { } void set(const std::string&s) { if(!_changed){ if(_contents != s){ _changed = true; _contents = s; } } else { _contents = s; } } const std::string& get()const { return _contents; } bool changed()const { return _changed; } void unchange() { _changed = false; } }; typedef std::map Hash; Hash _hash; std::string make_path(const Key&k)const { return join_keys(_base, k); } public: ConfDB(const std::string path):_base(path) { } template void get_subkeys(const Key&k,T&container) { DirContainer d(make_path(k)); for(DirContainer::iterator i = d.begin();!!i;++i) container.push_back(*i); } void write_out() ; void sync() { write_out(); _hash.erase(_hash.begin(),_hash.end()); } //always true if the value + amt <= max or max == 0 bool increment(const Key&k,Numeric amt=1, Numeric max=0) ; bool decrement(const Key&k,Numeric amt=1, Numeric min=0) ; bool exists(const Key&k) ; // This is used by the OpenSSL wrapper, for finding where its // keyfiles are. It should only be used for things like this. std::string get_fsname(const Key&k) { return make_path(k); } std::string get(const Key&k) ; template void get_type(const Key&k,T&ret) { std::istringstream iss(get(k)); iss >> ret; if(!iss) throw ConfException(k,"unable to correctly read value"); } void put(const Key&k,const std::string&str) ; template void put_type(const Key&k,const T&ret) { std::ostringstream oss; oss << ret; if(!oss.good()) throw ConfException(k,"unable to correctly write value"); put(k,oss.str()); } Key join_keys(const Key&base,const Key&key)const { return base + "/" + key; } ~ConfDB() { write_out(); } }; #endif teepeedee-0.3.0/lib/iocontextwriter.hh0000664000175000017500000000221507663537155013503 #ifndef _TEEPEEDEE_LIB_IOCONTEXTWRITER_HH #define _TEEPEEDEE_LIB_IOCONTEXTWRITER_HH #include "iocontext.hh" class IOContextWriter : public virtual IOContext { const char* _buf; unsigned _buf_len; unsigned _buf_pos; void do_finished_writing() { finished_writing(); } protected: unsigned buf_len()const { return _buf_len; } bool write_buf_empty()const { return !_buf || !_buf_len || _buf_pos >= _buf_len; } virtual void finished_writing() { } void reset_write_buf() { _buf = 0; _buf_pos = 0; _buf_len = 0; } void set_write_buf(const char*buf,unsigned len) { move_write_buf(buf,len); _buf_pos = 0; } void move_write_buf(const char*buf,unsigned len) { _buf = buf; _buf_len = len; } bool want_write(Stream&stream) { if(write_buf_empty()){ do_finished_writing(); } return !write_buf_empty(); } bool want_read(Stream&stream) { return false; } protected: void // return true if want to write more write_out(Stream&stream,size_t max) ; public: IOContextWriter():_buf(0),_buf_len(0),_buf_pos(0) { } }; #endif teepeedee-0.3.0/lib/path.hh0000664000175000017500000000210507600570464011153 #ifndef _TEEPEEDEE_SRC_PATH_HH #define _TEEPEEDEE_SRC_PATH_HH #include #include class Path : public std::list { public: Path() { } Path(const std::string&dir) { append(dir); } Path(const std::string&dir,const std::string&then) { append(dir); chdir(then); } Path(const Path&dir,const std::string&then) { *this = dir; chdir(then); } void clear() { erase(begin(),end()); } std::string str()const { std::string ret; if(empty())return ret; const_iterator i = begin(); ret += *i; for(++i;i!=end();++i) ret += std::string("/") + *i; return ret; } // operator std::string()const // { // return str(); // } void chdir(const std::string&elem) { if(elem.empty()) return; if(elem[0] == '/') clear(); append(elem); } void append(const std::string&name) ; void append_one(const std::string&name) ; std::string get_last()const { if(empty())return std::string(); return *rbegin(); } }; #endif teepeedee-0.3.0/lib/unixexception.hh0000664000175000017500000000113407600570464013122 #ifndef _TEEPEEDEE_UNIXEXCEPTION_HH #define _TEEPEEDEE_UNIXEXCEPTION_HH #include #include #include #include class UnixException : public std::exception { int _errno; std::string _desc; public: UnixException(const std::string&d=std::string(), int e = errno):_errno(e),_desc(d) { if(_desc.empty())_desc="unknown"; _desc += ": " + std::string(strerror(_errno)); } const char*what() const throw() { return _desc.c_str(); } int get_errno()const throw() { return _errno; } ~UnixException()throw() { } }; #endif teepeedee-0.3.0/lib/confexception.hh0000664000175000017500000000071007600570464013063 #ifndef _TEEPEEDEE_CONFEXCEPTION_HH #define _TEEPEEDEE_CONFEXCEPTION_HH #include class ConfException : public std::exception { std::string _value_name; std::string _problem; public: ConfException(const std::string&val,const std::string&prob): _value_name(val) { _problem = _value_name + ": " + prob; } const char*what() const throw() { return _problem.c_str(); } ~ConfException()throw() { } }; #endif teepeedee-0.3.0/lib/filelisterfile.hh0000664000175000017500000000102607600570464013222 #ifndef _TEEPEEDEE_LIB_FILELISTERFILE_HH #define _TEEPEEDEE_LIB_FILELISTERFILE_HH #include #include "filelister.hh" #include "path.hh" class FileListerFile:public FileLister { Path _path; public: FileListerFile(const Path&p):_path(p) { } bool last()const { return _path.empty(); } virtual void next() { _path.clear(); } virtual std::string name() const { return _path.get_last(); } virtual Path virtual_path() const { return _path; } }; #endif teepeedee-0.3.0/lib/filelisternone.hh0000664000175000017500000000071607600570464013247 #ifndef _TEEPEEDEE_LIB_FILELISTERNONE_HH #define _TEEPEEDEE_LIB_FILELISTERNONE_HH #include #include "filelister.hh" #include "path.hh" class FileListerNone:public FileLister { public: virtual bool last()const { return true; } virtual void next() { return; } virtual std::string name() const { return std::string(); } virtual Path virtual_path() const { return Path(); } }; #endif teepeedee-0.3.0/lib/filelister.hh0000664000175000017500000000057407661461312012367 #ifndef _TEEPEEDEE_LIB_FILELISTER_HH #define _TEEPEEDEE_LIB_FILELISTER_HH #include class Path; class FileLister { public: virtual bool last()const//true if no more files left =0; virtual void next() =0; virtual std::string name() const=0; virtual Path virtual_path() const=0; virtual ~FileLister() { } }; #endif teepeedee-0.3.0/lib/filelisterdir.hh0000664000175000017500000000136407600570464013066 #ifndef _TEEPEEDEE_LIB_FILELISTERDIR_HH #define _TEEPEEDEE_LIB_FILELISTERDIR_HH #include #include "path.hh" #include "filelister.hh" #include "dircontainer.hh" class FileListerDir : public FileLister, private DirContainer { Path _vpath; DirContainer::iterator _entry; public: FileListerDir(const std::string& dir,const Path&vpath): DirContainer(dir), _vpath(vpath), _entry(begin()) { } int get_fd() { return _entry.get_fd(); } void next() { ++_entry; } bool last()const { return _entry == end(); } std::string name() const { return *_entry; } Path virtual_path() const { Path p(_vpath); p.push_back(name()); return p; } }; #endif teepeedee-0.3.0/lib/iocontextlist.hh0000664000175000017500000000264307662033373013137 #ifndef _TEEPEEDEE_LIB_IOCONTEXTLIST_HH #define _TEEPEEDEE_LIB_IOCONTEXTLIST_HH #include #include "iocontextwriter.hh" #include "iocontextcontrolled.hh" #include "filelister.hh" #include "path.hh" class IOContextList : public IOContextWriter, public IOContextControlled { FileLister*_lister; std::string _buf; void free() { if(_lister){ delete _lister; _lister = 0; } } void next_entry() { if(no_entries_left()) return; prepare_entry(); skip_entry(); } protected: void skip_entry() { if(no_entries_left()) return; _lister->next(); } bool no_entries_left()const { return !_lister || _lister->last(); } Path virtual_path()const { return _lister->virtual_path(); } std::string entry_name()const { return _lister->name(); } void finished_writing() { if(no_entries_left()) { finished_listing(); return; } next_entry(); } virtual void finished_listing() { completed(); } virtual void prepare_entry() =0; void set_entry(const std::string&s) { _buf = s; set_write_buf(_buf.c_str(),_buf.length()); } public: IOContextList(IOController*ioc,FileLister*l): IOContextControlled(ioc), _lister(l) { } std::string desc()const { return "directory listing"; } ~IOContextList() { free(); } }; #endif teepeedee-0.3.0/lib/iocontextresponder.hh0000664000175000017500000000336407662033373014166 #ifndef _TEEPEEDEE_LIB_IOCONTEXTRESPONDER_HH #define _TEEPEEDEE_LIB_IOCONTEXTRESPONDER_HH #include #include #include "iocontextwriter.hh" // a class for protocols that read in one line then output something class IOContextResponder : public IOContextWriter { typedef IOContextWriter super; std::string _remotename; std::string _response; char _buf[2000]; unsigned _buf_write_pos; bool _closing; void report(bool connecting=true) ; void prepare_io() ; void prepare_read() { _buf_write_pos = 0; } protected: ~IOContextResponder() { report(false); } void read_in(Stream&stream,size_t max) ; void write_out(Stream&stream,size_t max) ; void close_after_output() { _closing = true; } bool closing()const { return _closing; } bool response_ready()const { return !_response.empty(); } void finished_writing() ; void read_done(Stream&stream) ; virtual void finished_reading(char*buf,size_t len) =0; virtual void input_line_too_long() { delete_this(); } void add_response(const std::string&resp) { _response += resp; if(!write_buf_empty()) move_write_buf(_response.c_str(),_response.length()); else prepare_io(); } std::string remotename()const { return _remotename; } public: IOContextResponder(): _buf_write_pos(0), _closing(false) { } bool want_write(Stream&stream) { return response_ready() || closing(); } bool want_read(Stream&stream) { if(!response_ready()) return true; return false; } void remote_stream(const Stream&stream) { _remotename = stream.remotename(); report(); } }; #endif teepeedee-0.3.0/lib/iocontextxfer.hh0000664000175000017500000000516210006060067013111 #ifndef _TEEPEEDEE_LIB_IOCONTEXTXFER_HH #define _TEEPEEDEE_LIB_IOCONTEXTXFER_HH #include "unixexception.hh" #include "iocontextcontrolled.hh" #include "xferlimit.hh" #include "sendfile.hh" class IOContextXfer : public IOContextControlled,public Sendfile { typedef IOContextControlled super; XferLimit* _limit; void free() { if(_limit){ delete _limit; _limit=0; } if(stream_out() && stream_out()->consumer() == this) stream_out()->release_consumer(); if(stream_in() && stream_in()->consumer() == this) stream_in()->release_consumer(); } void do_io() { if(!stream_in() && data_buffered()){ Sendfile::write_out(); if(!data_buffered()){ completed(); return; } return; } if(!stream_in()||!stream_out()) return; bool result = Sendfile::io(); if(result){ completed(); return; } } protected: void limit_xfer(off_t bytes) { _limit->xfer(bytes); if(bytes) made_progress(); } public: IOContextXfer(IOController*ioc,Stream*in=0,Stream*out=0): IOContextControlled(ioc), Sendfile(in,out), _limit(0) { } void limit(XferLimit*xl) { _limit = xl; } bool stream_hungup(Stream&stream) { if(stream_in() && stream_in()->consumer() == this) stream_in()->release_consumer(); if (stream_out() && &stream==stream_in() && &stream != stream_out()) { if(data_buffered()){ stream_in(0); return false; } } if(stream_out() && stream_out()->consumer() == this) stream_out()->release_consumer(); stream_out(0); stream_in(0); return true; } std::string desc()const { return "sendfile " + super::desc(); } ~IOContextXfer() { free(); } bool want_write(Stream&stream) { if(!stream_out()){ if(stream_in()!=&stream) stream_out(&stream); } if(has_buf() && !data_buffered()) return false; return &stream==stream_out(); } bool want_read(Stream&stream) { if(!stream_in()){ if(stream_out()!=&stream) stream_in(&stream); } if(data_buffered()) return false; if(&stream!=stream_in()) return false; if(!has_buf()) return false; return true; } protected: void read_in(Stream&stream,size_t max) { if(!stream_in()){ if(stream_out()!=&stream) stream_in(&stream); } if(&stream!=stream_in()) return; do_io(); } void write_out(Stream&stream,size_t max) { if(!stream_out()){ if(stream_in()!=&stream) stream_out(&stream); } if(&stream!=stream_out()) return; do_io(); } }; #endif teepeedee-0.3.0/lib/sendfile.hh0000664000175000017500000000205110006060067011773 #ifndef _TEEPEEDEE_LIB_SENDFILE_HH #define _TEEPEEDEE_LIB_SENDFILE_HH #include "stream.hh" class Sendfile { Stream*_in; Stream*_out; bool read_in(); void free() { if(_buf){ delete _buf; _buf = 0; } } struct Buf { char buffer[1<<24]; unsigned len; unsigned pos; Buf():len(0),pos(0) { } }; Buf*_buf; Sendfile(const Sendfile&) { } protected: bool has_buf()const { return _buf; } virtual void limit_xfer(off_t bytes) { } public: Sendfile(Stream*in,Stream*out): _in(in),_out(out), _buf(0) { } Stream* stream_in() { return _in; } Stream* stream_out() { return _out; } void stream_in(Stream*s) { _in=s; } void stream_out(Stream*s) { _out=s; } bool data_buffered() { if(!_buf) return false; return (_buf->pos < _buf->len); } void write_out(); // returns true if finished (may throw XferLimitException) bool io(); ~Sendfile() { free(); } }; #endif teepeedee-0.3.0/lib/iocontextcontrolled.hh0000664000175000017500000000120607662033373014323 #ifndef _TEEPEEDEE_LIB_IOCONTEXTCONTROLLED_HH #define _TEEPEEDEE_LIB_IOCONTEXTCONTROLLED_HH #include #include #include "iocontroller.hh" class IOContextControlled:public virtual IOContext { IOController*_control; void notify(bool happy) { if(!_control) return; IOController*tmp=_control; detach(); tmp->xfer_done(this,happy); } public: IOContextControlled(IOController*c):_control(c) { } void detach() { _control = 0; } void completed(bool happy=true) { notify(happy); delete_this(); } ~IOContextControlled() { notify(false); } }; #endif teepeedee-0.3.0/lib/iocontroller.hh0000664000175000017500000000040507600570464012733 #ifndef _TEEPEEDEE_SRC_IOCONTROLLER_HH #define _TEEPEEDEE_SRC_IOCONTROLLER_HH class IOContextControlled; class IOController { public: virtual ~IOController() { } virtual void xfer_done(IOContextControlled*xfer,bool successful) =0; }; #endif teepeedee-0.3.0/lib/uri.hh0000664000175000017500000000210707661461312011016 #ifndef _TEEPEEDEE_LIB_URI_HH #define _TEEPEEDEE_LIB_URI_HH #include #include "path.hh" // partial RFC 2396 // does not handle relative paths class URI { std::string _scheme; std::string _authority; Path _path; void reset() { _scheme = std::string(); _authority = std::string(); _path.clear(); } void parse_from_authority(const std::string&encoded) ; void parse_from_path(const std::string&encoded) ; static std::string dequote_percent(const std::string&hexencoded) ; static std::string quote_percent(const std::string&hexencoded) ; public: URI(const std::string&e) // e should be encoded as in a http request { parse(e); } URI() { } Path path()const { return _path; } void set_path(const Path&unencoded) { _path = unencoded; } std::string str()const { return get_html_quoted(); } std::string authority()const { return _authority; } std::string get_html_quoted()const ; void parse(const std::string&encoded) ; }; #endif teepeedee-0.3.0/lib/filelisterglob.hh0000664000175000017500000000330707600570464013232 #ifndef _TEEPEEDEE_LIB_FILELISTERGLOB_HH #define _TEEPEEDEE_LIB_FILELISTERGLOB_HH #include #include "filelister.hh" #include "path.hh" class FileListerGlob:public FileLister { std::string _pattern; FileLister* _lister; void free() { if(_lister){ delete _lister; _lister = 0; } } static bool match(std::string::const_iterator nbeg, std::string::const_iterator nend, std::string::const_iterator pbeg, std::string::const_iterator pend) { while(pbeg != pend){ if(*pbeg == '*'){ do { ++pbeg; if(pbeg == pend) return true; } while(*pbeg == '*'); // stop DoS attack for(std::string::const_iterator i = nbeg;i!=nend;++i) if(match(i,nend,pbeg,pend)) return true; return false; } if(nbeg == nend) return false; if(*pbeg != '?') if(*nbeg != *pbeg) return false; ++nbeg; ++pbeg; } return nbeg == nend; } bool match(const std::string&name) { return match(name.begin(),name.end(),_pattern.begin(),_pattern.end()); } void skip_till_match() { if(!_lister)return; while (!_lister->last() && !match(_lister->name())){ _lister->next(); } } public: FileListerGlob(const std::string&pat,FileLister*list): _pattern(pat), _lister(list) { skip_till_match(); } ~FileListerGlob() { free(); } virtual bool last()const { return !_lister || _lister->last(); } virtual void next() { if(last())return; _lister->next(); skip_till_match(); } virtual std::string name() const { return _lister->name(); } virtual Path virtual_path() const { return _lister->virtual_path(); } }; #endif teepeedee-0.3.0/lib/xferlimit.hh0000664000175000017500000000425007662033373012226 #ifndef _TEEPEEDEE_LIB_XFERLIMIT_HH #define _TEEPEEDEE_LIB_XFERLIMIT_HH #include #include #include #include "xferlimitexception.hh" #include "time.hh" class XferLimit{ off_t _total; Time _start; std::string _remotename; std::string _service; std::string _username; std::string _resource; public: class Direction { public: enum type { upload,download }; static std::string to_string(type d) { switch(d){ default:return (char*)0; case upload:return "upload"; case download:return "download"; } }; static char to_char(type d) { switch(d){ default:return ' '; case upload:return 'i'; case download:return 'o'; } }; }; private: Direction::type _dir; protected: virtual bool // true if allowed to xfer that many bytes book_xfer(off_t bytes,Direction::type dir) { return true; }; public: XferLimit(Direction::type dir, const std::string& remotename, const std::string& service, const std::string&resource, const std::string&username): _total(0), _remotename(remotename), _service(service), _username(username), _resource(resource), _dir(dir) { } void direction(Direction::type d) { _dir = d; } void remotename(const std::string&rm) { _remotename = rm; } void service(const std::string&rm) { _service = rm; } void username(const std::string&s) { _username = s; } void resource(const std::string&s) { _resource = s; } void xfer(off_t bytes) { if(!book_xfer(bytes,_dir)) throw XferLimitException(); _total += bytes; } virtual ~XferLimit() { //xferlog format as described http://www.id.ethz.ch/Dienste/Lists/Archiv/sun-unix/0041.html Time end; end -= _start; std::cout << _start << ' ' << end.seconds() << ' ' << _remotename << ' ' << _total << ' ' << _resource << ' ' << "b _ " << Direction::to_char(_dir) << ' ' << "g " << _username << ' ' << _service << ' ' << "0 *" << std::endl; } }; #endif teepeedee-0.3.0/lib/xferlimitexception.hh0000664000175000017500000000047107661461312014143 #ifndef _TEEPEEDEE_LIB_XFERLIMITEXCEPTION_HH #define _TEEPEEDEE_LIB_XFERLIMITEXCEPTION_HH #include "limitexception.hh" class XferLimitException:public LimitException{ public: const char* what()const throw() { return "transfer limit exceeded"; } ~XferLimitException()throw() { } }; #endif teepeedee-0.3.0/lib/limitexception.hh0000664000175000017500000000044307661461312013255 #ifndef _TEEPEEDEE_LIB_LIMITEXCEPTION_HH #define _TEEPEEDEE_LIB_LIMITEXCEPTION_HH #include class LimitException:public std::exception{ public: const char* what()const throw() { return "configured limit exceeded"; } ~LimitException()throw() { } }; #endif teepeedee-0.3.0/lib/streamfd.hh0000664000175000017500000000633707663537155012050 #ifndef _TEEPEEDEE_LIB_STREAMFD_HH #define _TEEPEEDEE_LIB_STREAMFD_HH #include #include #include #include #include #include #include #include "stream.hh" #include "unixexception.hh" class StreamFD : public Stream { int _fd; int fcntl(int cmd,int flags) { return ::fcntl(fd(),cmd,flags); } void set_nonblock() { int flags = fcntl(F_GETFL,0); if(flags==-1) throw UnixException("fcntl(F_GETFL)"); flags |= O_NONBLOCK; if(fcntl(F_SETFL,flags)==-1) throw UnixException("fcntl(F_SETFL)"); } void setsockopt(int LEVEL, int OPTNAME, void *OPTVAL, socklen_t OPTLEN) { if(-1 == ::setsockopt(fd(),LEVEL,OPTNAME,OPTVAL,OPTLEN)) throw UnixException("setsockopt"); } void shutdown() { if(fd()!=-1) ::shutdown(fd(),2); close(); } void close() { if(fd() != -1){ ::close(fd()); _fd = -1; } } public: typedef int events_t; std::string desc()const ; void set_reuse_addr(bool on=true) { int opt = on ? 1 : 0; setsockopt(SOL_SOCKET,SO_REUSEADDR,&opt,sizeof(opt)); } StreamFD(int f=-1):_fd(-1) { fd(f); } Stream* accept()const { int f = ::accept(fd(),0,0); if(f == -1){ if(errno != EWOULDBLOCK) throw UnixException("accept"); return 0; } try { return new StreamFD(f); } catch (...){ ::close(f); throw; } } // this function should not be used to change the fd while the // instance is in a streamtable void fd(int f) { close(); _fd = f; if(f!=-1) set_nonblock(); } int fd()const { return _fd; } virtual ssize_t read(char*buffer,size_t size) { ssize_t ret; do { ret = ::read(fd(),buffer,size); }while(ret == -1 && errno == EINTR); if(ret == -1){ if(errno == EAGAIN) return -1; if(errno == ECONNRESET || errno == ENETRESET) throw ClosedException(); throw UnixException("read"); } if(ret == 0) throw ClosedException(); return ret; } virtual ssize_t write(const char*buffer,size_t size) { ssize_t ret; do { ret = ::write(fd(),buffer,size); }while(ret == -1 && errno == EINTR); if(ret == -1){ if(errno == EAGAIN) return -1; if(errno == ECONNRESET || errno == ENETRESET) throw ClosedException(); throw UnixException("write"); } return ret; } ~StreamFD() { close(); } std::string localname()const ; std::string remotename()const ; void getsockname(void*addr,socklen_t*len)const { if(::getsockname(fd(),(sockaddr*)addr,len)) throw UnixException("getsockname"); //cannot ref desc as that uses getsockname } void getpeername(void*addr,socklen_t*len)const { if(::getpeername(fd(),(sockaddr*)addr,len)) throw UnixException("getpeername"); } void seek_from_start(off_t pos) { if(::lseek(fd(),pos,SEEK_SET)==-1) throw UnixException("lseek"); } virtual bool ready_to_read() { return false; } virtual bool ready_to_write() { return false; } // XXX implement ready_to_read and ready_to_write with poll or select }; #endif teepeedee-0.3.0/lib/stream.hh0000664000175000017500000000555107663537155011533 #ifndef _TEEPEEDEE_LIB_STREAM_HH #define _TEEPEEDEE_LIB_STREAM_HH #include #include #include #include #include class IOContext; class StreamTable; class Stream { IOContext*_consumer; void free() ; Stream(const Stream&) { } public: class Exception:public std::exception {public: ~Exception()throw() { } }; class ClosedException:public Exception { public: const char*what()const throw() { return "attempt to do IO on a closed stream"; } ~ClosedException()throw() { } }; class UnsupportedException:public Exception { public: const char*what()const throw() { return "attempt to perform an unsupported operation on a stream"; } ~UnsupportedException()throw() { } }; // Bind and listen to a socket // Try to find a port randomly in the range [PORT_MIN,PORT_MAX] // inclusive // INADDR is in network byte order // PORT_MIN is in host byte order // PORT_MAX is in host byte order static Stream* listen_ipv4_range(uint32_t inaddr,uint16_t port_min,uint16_t port_max); // will never return 0 (throws exception) static Stream* listen(const sockaddr*addr,socklen_t len) ; // will never return 0 (throws exception) static Stream* connect(const sockaddr*addr,socklen_t len,const sockaddr*source_addr=0,socklen_t source_len=0); Stream(IOContext*c=0):_consumer(c) { } IOContext* consumer() { return _consumer; } void consumer(IOContext*c) { free(); _consumer = c; } void release_consumer() { _consumer=0; } struct State { enum type { none=0,want_read=1, want_write=2 }; }; virtual Stream* accept()const { return 0; } virtual ssize_t read(char*buffer,size_t size) =0; virtual ssize_t write(const char*buffer,size_t size) =0; virtual bool ready_to_read() { return true; } virtual bool ready_to_write() { return true; } virtual std::string localname()const { return "localend"; } virtual std::string remotename()const { return "remoteend"; } void getsockname(struct sockaddr_in&sai)const { socklen_t len = sizeof sai; memset(&sai,0,sizeof sai); getsockname(&sai,&len); } void getpeername(struct sockaddr_in&sai)const { socklen_t len = sizeof sai; memset(&sai,0,sizeof sai); getpeername(&sai,&len); } virtual void getsockname(void*addr,socklen_t*len)const { throw UnsupportedException(); } virtual void getpeername(void*addr,socklen_t*len)const { throw UnsupportedException(); } virtual void seek_from_start(off_t pos) { throw UnsupportedException(); } virtual std::string desc()const =0; virtual ~Stream() { free(); } }; #endif teepeedee-0.3.0/lib/streamopenssl.hh0000664000175000017500000000273207662033373013125 #ifndef _TEEPEEDEE_LIB_STREAMOPENSSL_HH #define _TEEPEEDEE_LIB_STREAMOPENSSL_HH #include "stream.hh" #include "iocontextopenssl.hh" #include "opensslexception.hh" class StreamOpenSSL :public Stream { typedef Stream super; IOContextOpenSSL*_source; SSL* ssl() { return _source->ssl(); } bool waiting(int ret) { return _source->waiting(ret); } public: StreamOpenSSL(IOContextOpenSSL&fol):_source(&fol) { _source->accept(); } ~StreamOpenSSL() { if(_source->hungup()) delete _source; else _source->shutdown(); } ssize_t read(char*buffer,size_t size) { int ret; ret = SSL_read(ssl(),buffer,size); if(ret <0) { if(waiting(ret)){ if(_source->hungup()) throw ClosedException(); return -1; } throw OpenSSLException("SSL_read"); } return ret; } virtual ssize_t write(const char*buffer,size_t size) { int ret; if(_source->hungup()) throw ClosedException(); if(_source->ssl_write_buffer_too_big()) return -1; ret = SSL_write(ssl(),buffer,size); if(ret <0) { if(waiting(ret)){ return -1; } throw OpenSSLException("SSL_write"); } return ret; } virtual bool ready_to_read() { return SSL_pending(ssl()); } virtual bool ready_to_write() { return !_source->ssl_write_buffer_too_big(); } std::string desc()const { return "SSL/TLS encrypted stream"; } }; #endif teepeedee-0.3.0/lib/opensslexception.hh0000664000175000017500000000116607661461312013625 #ifndef _TEEPEEDEE_OPENSSLEXCEPTION_HH #define _TEEPEEDEE_OPENSSLEXCEPTION_HH #include #include #include class OpenSSLException : public std::exception { unsigned long _errno; std::string _desc; public: OpenSSLException(const std::string&d=std::string(), int e = ERR_get_error()):_errno(e),_desc(d) { if(_desc.empty())_desc="unknown"; _desc += ": " + std::string(ERR_error_string(e,0)); } const char*what() const throw() { return _desc.c_str(); } int get_errno()const throw() { return _errno; } ~OpenSSLException()throw() { } }; #endif teepeedee-0.3.0/lib/iocontextopenssl.hh0000664000175000017500000001070710006060067013631 #ifndef _TEEPEEDEE_LIB_IOCONTEXTOPENSSL_HH #define _TEEPEEDEE_LIB_IOCONTEXTOPENSSL_HH #ifndef _TEEPEEDEE_LIB_IOCONTEXTOPENSSL_I_KNOW_ABOUT_OPENSSL #error Sorry, to you I do not exist #endif #include #include #include #include "stream.hh" #include "iocontextwriter.hh" #include "opensslexception.hh" class IOContextOpenSSL : public IOContextWriter { typedef IOContextWriter super; unsigned ssl_buffer_max()const { return 1<<24; } bool ssl_buffer_too_big(BIO*bio) { BUF_MEM *bptr; BIO_get_mem_ptr(bio, &bptr); return(bptr->length >= (int)ssl_buffer_max()); } bool ssl_write_buffer_too_big() { return ssl_buffer_too_big(_ssl_out); } bool waiting(int ret) { if(SSL_get_error(_ssl,ret)==SSL_ERROR_WANT_READ) return true; if(SSL_get_error(_ssl,ret)==SSL_ERROR_WANT_WRITE) return true; return false; } SSL*_ssl; BIO*_ssl_in; // data going into _SSL BIO*_ssl_out; // data coming out of _SSL struct State { enum type { none,established,accept,shutdown,hungup }; }; State::type _state; void try_accept() { int ret = SSL_accept(_ssl); if(ret == 1){ _state = State::established; } else { if(ret >= 0 || !waiting(ret)) throw OpenSSLException("SSL_accept"); } } void try_shutdown() { int ret = SSL_shutdown(_ssl); if(ret == -1){ if(!waiting(ret)) throw OpenSSLException("SSL_shutdown"); } if(SSL_get_shutdown(_ssl)&SSL_SENT_SHUTDOWN){ _state = State::none; delete_this(); return; } } void try_state_change() { switch(_state){ case State::accept: try_accept(); break; case State::shutdown: try_shutdown(); break; default:break; } } void do_set_write_buf() { int left = BIO_pending(_ssl_out); BUF_MEM *bptr; BIO_get_mem_ptr(_ssl_out, &bptr); move_write_buf(bptr->data,left); } friend class StreamOpenSSL; protected: virtual void read_in(Stream&stream,size_t max) { if(dead()){ if(!BIO_pending(_ssl_in)) delete_this(); return; } if(ssl_buffer_too_big(_ssl_in)){ if(_state == State::shutdown || _state == State::accept) { warnx("SSL input buffer too full; rudely shutting down"); delete_this(); } return; } try_state_change(); char buf[1<<16]; // must be separate buffer because ssl might require protocol reads to continue writes max = (max && max < sizeof buf) ? max : sizeof buf; ssize_t ret = do_read(stream,buf,max); if(ret == -1) return; if(ret == 0) { delete_this(); return; } if(ret != BIO_write(_ssl_in, buf, ret)) throw OpenSSLException("BIO_write"); } void write_out(Stream&stream,size_t max) { if(dead()){ return; } do_set_write_buf(); super::write_out(stream,max); } void finished_writing() { if(dead()){ return; } try_state_change(); if(buf_len() != (unsigned)BIO_pending(_ssl_out)) { do_set_write_buf(); return; } BIO_reset(_ssl_out); reset_write_buf(); } SSL* ssl() { return _ssl; } void accept() { _state = State::accept; try_accept(); } void shutdown() { if(!dead()) _state = State::shutdown; } bool dead()const { return _state == State::hungup || _state==State::none; } bool hungup()const { return _state == State::hungup; } public: IOContextOpenSSL(SSL_CTX*ctx):_ssl(0), _ssl_in(0), _ssl_out(0), _state(State::none) { _ssl = SSL_new(ctx); if(!_ssl) throw OpenSSLException("SSL_new"); _ssl_in = BIO_new(BIO_s_mem()); if(!_ssl_in){ SSL_free(_ssl); throw OpenSSLException("BIO_new (input BIO)"); } _ssl_out = BIO_new(BIO_s_mem()); if(!_ssl_out){ BIO_free(_ssl_in); SSL_free(_ssl); throw OpenSSLException("BIO_new (output BIO)"); } SSL_set_bio(_ssl,_ssl_in,_ssl_out); SSL_set_read_ahead(_ssl,1); } std::string desc()const { return "ssl filter"; } ~IOContextOpenSSL() { if(_ssl){ SSL_free(_ssl); _ssl = 0; } } bool want_read(Stream&) { return !ssl_buffer_too_big(_ssl_in); } bool stream_hungup(Stream&stream) { if(_state == State::none) return true; if(_state == State::shutdown) return true; _state = State::hungup; return false; } }; #endif teepeedee-0.3.0/lib/streamcontainer.hh0000664000175000017500000000042007662036460013414 #ifndef _TEEPEEDEE_LIB_STREAMCONTAINER_HH #define _TEEPEEDEE_LIB_STREAMCONTAINER_HH class Stream; // This is just to hide StreamTable from things class StreamContainer { public: virtual void add(Stream*s) =0; virtual ~StreamContainer() { } }; #endif teepeedee-0.3.0/lib/time.hh0000664000175000017500000000216307662036460011162 #ifndef _TEEPEEDEE_LIB_TIME_HH #define _TEEPEEDEE_LIB_TIME_HH #include #include #include "unixexception.hh" class Time { struct timeval _val; void reset() { if(gettimeofday(&_val,0)) throw UnixException("gettimeofday"); } public: Time() { reset(); } void strftime(char*buf,size_t size,const char*fmt)const { if(!::strftime(buf,size,fmt,gmtime(&_val.tv_sec))) throw UnixException("strftime"); } std::string xferlog_format()const { char buf[64]; strftime(buf,sizeof buf,"%a %b %d %H:%M:%S %Y"); return std::string(buf); } long microseconds()const { return _val.tv_usec; } double seconds()const { return double(_val.tv_sec) + double(0.000001)*double(_val.tv_usec); } Time& operator-=(Time rhs) { if(_val.tv_usec < rhs._val.tv_usec) { _val.tv_sec --; _val.tv_usec += 1000000; } _val.tv_usec -= rhs._val.tv_usec; _val.tv_sec -= rhs._val.tv_sec; return *this; } }; inline std::ostream&operator<<(std::ostream&o,const Time&t) { return o< #include class Stream; class StreamContainer; class SSLStreamFactory { void*_ssl_ctx;//so that we don't need to include the openssl headers void free() ; public: class UnsupportedException:public std::exception { public: const char*what()const throw() { return "SSL not available"; } ~UnsupportedException()throw() { } }; SSLStreamFactory() ; ~SSLStreamFactory() ; Stream* new_stream(Stream*source,StreamContainer&table) ; void set_keys(const std::string&public_cert_filename, const std::string&private_key_filename) ; }; #endif teepeedee-0.3.0/lib/iocontextlistener.hh0000664000175000017500000000230510006060067013766 #ifndef _TEEPEEDEE_LIB_IOCONTEXTLISTENER_HH #define _TEEPEEDEE_LIB_IOCONTEXTLISTENER_HH #include #include "iocontext.hh" #include "streamcontainer.hh" class IOContextListener:public virtual IOContext { StreamContainer*_table; protected: void read_in(Stream&stream,size_t max) { while(Stream*s=do_accept(stream)){ Stream*t; try { t= new_stream(s,stream_container()); } catch (...){ delete s; throw; } try{ IOContext*ioc = new_iocontext(); if(!ioc){ delete t; return; } t->consumer(ioc); stream_container().add(t); } catch (...) { delete t; throw; } t->consumer()->remote_stream(*s); } } public: IOContextListener():_table(0) { } void stream_container(StreamContainer*table) { _table=table; } StreamContainer& stream_container() { return *_table; } bool want_write(Stream&stream) { return false; } bool want_read(Stream&stream) { return true; } virtual IOContext* new_iocontext() =0; virtual Stream* new_stream(Stream*source,StreamContainer&table) { return source; } std::string desc()const { return "listener"; } }; #endif teepeedee-0.3.0/lib/permitsignals.hh0000664000175000017500000000065610006060067013074 #ifndef _TEEPEEDEE_LIB_PERMITSIGNALS_HH #define _TEEPEEDEE_LIB_PERMITSIGNALS_HH #include class PermitSignals { sigset_t _old; public: PermitSignals(int const*masked_signals) { sigset_t ss; sigemptyset(&ss); for(const int*s=masked_signals;*s!=NSIG;s++) sigaddset(&ss,*s); sigprocmask(SIG_UNBLOCK,&ss,&_old); } ~PermitSignals() { sigprocmask(SIG_SETMASK,&_old,0); } } ; #endif teepeedee-0.3.0/lib/signal.hh0000664000175000017500000000066710006065766011505 #ifndef _TEEPEEDEE_LIB_SIGNAL_HH #define _TEEPEEDEE_LIB_SIGNAL_HH #include #include #include "unixexception.hh" class Signal { sighandler_t _old; int _signum; public: Signal(int sn,sighandler_t n):_signum(sn) { _old = signal(sn,n); if(_old == SIG_ERR) throw UnixException("signal"); } ~Signal() { if(signal(_signum,_old)==SIG_ERR) warnx("signal(%d)",_signum); } }; #endif teepeedee-0.3.0/lib/Makefile.am0000664000175000017500000000164110006065766011734 noinst_LIBRARIES = libteepeedee.a libteepeedee_a_SOURCES = streamtable.cc \ conf.cc \ confdb.cc \ iocontextwriter.cc \ iocontextresponder.cc \ sendfile.cc \ path.cc \ uri.cc \ dircontainer.cc \ stream.cc \ streamfd.cc \ sslstreamfactory.cc noinst_HEADERS = streamtable.hh \ iocontext.hh \ dircontainer.hh \ conf.hh \ confdb.hh \ iocontextwriter.hh \ path.hh \ unixexception.hh \ confexception.hh \ filelisterfile.hh \ filelisternone.hh \ filelister.hh \ filelisterdir.hh \ iocontextlist.hh \ iocontextresponder.hh \ iocontextxfer.hh \ sendfile.hh \ iocontextcontrolled.hh \ iocontroller.hh \ uri.hh \ filelisterglob.hh \ xferlimit.hh \ xferlimitexception.hh \ limitexception.hh \ streamfd.hh \ stream.hh \ streamopenssl.hh \ opensslexception.hh \ iocontextopenssl.hh \ streamcontainer.hh \ time.hh \ sslstreamfactory.hh \ iocontextlistener.hh \ permitsignals.hh \ signal.hh teepeedee-0.3.0/lib/Makefile.in0000664000175000017500000003331210006067574011744 # Makefile.in generated by automake 1.8.2 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ SOURCES = $(libteepeedee_a_SOURCES) srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = .. am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : subdir = lib DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(mkdir_p) CONFIG_CLEAN_FILES = AR = ar ARFLAGS = cru LIBRARIES = $(noinst_LIBRARIES) libteepeedee_a_AR = $(AR) $(ARFLAGS) libteepeedee_a_LIBADD = am_libteepeedee_a_OBJECTS = streamtable.$(OBJEXT) conf.$(OBJEXT) \ confdb.$(OBJEXT) iocontextwriter.$(OBJEXT) \ iocontextresponder.$(OBJEXT) sendfile.$(OBJEXT) path.$(OBJEXT) \ uri.$(OBJEXT) dircontainer.$(OBJEXT) stream.$(OBJEXT) \ streamfd.$(OBJEXT) sslstreamfactory.$(OBJEXT) libteepeedee_a_OBJECTS = $(am_libteepeedee_a_OBJECTS) DEFAULT_INCLUDES = -I. -I$(srcdir) depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles @AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/conf.Po ./$(DEPDIR)/confdb.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/dircontainer.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/iocontextresponder.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/iocontextwriter.Po ./$(DEPDIR)/path.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/sendfile.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/sslstreamfactory.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/stream.Po ./$(DEPDIR)/streamfd.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/streamtable.Po ./$(DEPDIR)/uri.Po CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) CXXLD = $(CXX) CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) \ -o $@ SOURCES = $(libteepeedee_a_SOURCES) DIST_SOURCES = $(libteepeedee_a_SOURCES) HEADERS = $(noinst_HEADERS) ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ HAVE_OPENSSL = @HAVE_OPENSSL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_RANLIB = @ac_ct_RANLIB@ ac_ct_STRIP = @ac_ct_STRIP@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ bindir = @bindir@ build_alias = @build_alias@ datadir = @datadir@ exec_prefix = @exec_prefix@ host_alias = @host_alias@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ prefix = @prefix@ program_transform_name = @program_transform_name@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ noinst_LIBRARIES = libteepeedee.a libteepeedee_a_SOURCES = streamtable.cc \ conf.cc \ confdb.cc \ iocontextwriter.cc \ iocontextresponder.cc \ sendfile.cc \ path.cc \ uri.cc \ dircontainer.cc \ stream.cc \ streamfd.cc \ sslstreamfactory.cc noinst_HEADERS = streamtable.hh \ iocontext.hh \ dircontainer.hh \ conf.hh \ confdb.hh \ iocontextwriter.hh \ path.hh \ unixexception.hh \ confexception.hh \ filelisterfile.hh \ filelisternone.hh \ filelister.hh \ filelisterdir.hh \ iocontextlist.hh \ iocontextresponder.hh \ iocontextxfer.hh \ sendfile.hh \ iocontextcontrolled.hh \ iocontroller.hh \ uri.hh \ filelisterglob.hh \ xferlimit.hh \ xferlimitexception.hh \ limitexception.hh \ streamfd.hh \ stream.hh \ streamopenssl.hh \ opensslexception.hh \ iocontextopenssl.hh \ streamcontainer.hh \ time.hh \ sslstreamfactory.hh \ iocontextlistener.hh \ permitsignals.hh \ signal.hh all: all-am .SUFFIXES: .SUFFIXES: .cc .o .obj $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu lib/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --gnu lib/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh clean-noinstLIBRARIES: -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES) libteepeedee.a: $(libteepeedee_a_OBJECTS) $(libteepeedee_a_DEPENDENCIES) -rm -f libteepeedee.a $(libteepeedee_a_AR) libteepeedee.a $(libteepeedee_a_OBJECTS) $(libteepeedee_a_LIBADD) $(RANLIB) libteepeedee.a mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/conf.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/confdb.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dircontainer.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iocontextresponder.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iocontextwriter.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/path.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sendfile.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sslstreamfactory.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/stream.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/streamfd.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/streamtable.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/uri.Po@am__quote@ .cc.o: @am__fastdepCXX_TRUE@ if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ @am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ $< .cc.obj: @am__fastdepCXX_TRUE@ if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ @am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` uninstall-info-am: ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(ETAGS_ARGS)$$tags$$unique" \ || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkdir_p) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(LIBRARIES) $(HEADERS) installdirs: install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-noinstLIBRARIES mostlyclean-am distclean: distclean-am -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-am dvi-am: html: html-am info: info-am info-am: install-data-am: install-exec-am: install-info: install-info-am install-man: installcheck-am: maintainer-clean: maintainer-clean-am -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-info-am .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ clean-noinstLIBRARIES ctags distclean distclean-compile \ distclean-generic distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-exec install-exec-am install-info \ install-info-am install-man install-strip installcheck \ installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \ uninstall-am uninstall-info-am # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: teepeedee-0.3.0/lib/streamtable.cc0000664000175000017500000001410510006067471012504 #include #include #include #include "streamtable.hh" #include "stream.hh" #include "streamfd.hh" #include "iocontext.hh" #include "permitsignals.hh" #undef debug #define debug(x) warnx x #undef debug #define debug(x) do {}while(0) void StreamTable::remove(IOContext*ioc) { debug(("removing iocontext %p: %s",ioc, ioc->desc().c_str())); for(_streams_type::iterator i = _streams.begin();i!=_streams.end();++i){ if(!(*i)->consumer() || (*i)->consumer()==ioc) remove(*i); } for(_added_streams_type::iterator i = _added_streams.begin();i!=_added_streams.end();++i){ if(!(*i)->consumer() || (*i)->consumer()==ioc) remove(*i); } } void StreamTable::free() { sow_and_reap(); for(_streams_type::iterator i=_streams.begin();i!=_streams.end();i=_streams.erase(i)) delete *i; // _fd_to_stream.erase(_fd_to_stream.begin(),_fd_to_stream.end()); // _nonfd_streams.erase(_nonfd_streams.begin(),_nonfd_streams.end()); _fd_to_stream.clear(); _nonfd_streams.clear(); _deleted_streams.clear(); _added_streams.clear(); } void StreamTable::do_add(Stream*s) { debug(("adding stream %p: %s",s,s->desc().c_str())); _streams.push_back(s); StreamFD*sfd = dynamic_cast(s); if(sfd){ int fd = sfd->fd(); _fd_to_stream[fd] = s; } else { _nonfd_streams.push_back(s); } } void StreamTable::sow_and_reap() { debug(("sowing and reaping")); // do not change the order!! as added streams might also be deleted for(_added_streams_type::iterator i=_added_streams.begin(); i!=_added_streams.end();++i) do_add(*i); _added_streams.clear(); for(_deleted_streams_type::iterator i=_deleted_streams.begin(); i!=_deleted_streams.end();++i) do_remove(*i); _deleted_streams.clear(); debug(("finished sowing and reaping")); } void StreamTable::do_remove(Stream*s) { debug(("really removing stream %p",s)); _streams.remove(s); StreamFD*sfd = dynamic_cast(s); if(sfd){ _fd_to_stream_type::iterator i = _fd_to_stream.find(sfd->fd()); if(i != _fd_to_stream.end()) _fd_to_stream.erase(i); } else { _nonfd_streams.remove(s); } debug(("delete starts")); try{ delete s; } catch (const std::exception&e){ warnx("exception raised deleting stream: %s",e.what()); } catch (...){ warnx("unknown exception raised deleting stream"); } debug(("delete ends")); } bool StreamTable::do_events(Stream*s) { bool wantmore = false; debug(("polling %s:%s",s->desc().c_str(),s->consumer()?s->consumer()->desc().c_str():"")); try{ if(s->consumer()){ s->consumer()->read(*s); } if(s->ready_to_read() && s->consumer() && s->consumer()->want_read(*s)) wantmore = true; if(s->consumer()){ s->consumer()->write(*s); } if(s->ready_to_write() && s->consumer() && s->consumer()->want_write(*s)) wantmore = true; if(!s->consumer()){ remove(s); wantmore = false; } } catch (IOContext::Destroy&d){ debug(("removing due to destroy %p",d.target())); remove(d.target()); wantmore = false; }catch(const Stream::ClosedException&e){ debug(("removing due to stream closed %p",s)); remove(s); wantmore = false; } catch (const std::exception&e){ warnx("closing %s:%s due to %s",s->desc().c_str(),s->consumer()?s->consumer()->desc().c_str():"",e.what()); remove(s); wantmore = false; } return wantmore; } void StreamTable::poll(int const*masked_signals) { struct pollfd *fds = 0; unsigned fds_size = 0; if(0){ // The simplest possible event loop while(!empty()){ sow_and_reap(); for(_streams_type::iterator i = _streams.begin();i!=_streams.end();++i) do_events(*i); { PermitSignals ps(masked_signals); sleep(1); } } } try{ while(!empty()){ bool nonfd_events_pending = false; sow_and_reap(); for(_nonfd_streams_type::iterator i=_nonfd_streams.begin(); i!=_nonfd_streams.end();++i) { if(do_events(*i)) nonfd_events_pending = true; if((*i)->consumer()){ if((*i)->consumer()->check_timeout(**i)){ debug(("has timed out %s:%s",(*i)->desc().c_str(),(*i)->consumer()?(*i)->consumer()->desc().c_str():"")); } } } sow_and_reap(); { unsigned nfds = _fd_to_stream.size(); if(nfds != fds_size){ if(nfds) { fds = (struct pollfd*)realloc(fds,nfds*sizeof(fds[0])); if(!fds) errx(EXIT_FAILURE,"out of memory allocating poll buffer"); } else { if(fds) { ::free(fds); fds = 0; } } fds_size = nfds; } } int fd=0; for(_fd_to_stream_type::iterator i = _fd_to_stream.begin(); i!=_fd_to_stream.end();++i,++fd){ fds[fd].fd = i->first; Stream*s = i->second; fds[fd].events = POLLHUP; try{ if(s->consumer()){ if(s->consumer()->check_timeout(*s)){ debug(("has timed out %s:%s",s->desc().c_str(),s->consumer()?s->consumer()->desc().c_str():"")); } } if(s->consumer()) { if(s->consumer()->want_read(*s)) { debug(("wants read %s:%s",s->desc().c_str(),s->consumer()?s->consumer()->desc().c_str():"")); fds[fd].events |= POLLIN; } } if(s->consumer()) { if(s->consumer()->want_write(*s)){ debug(("wants write %s:%s",s->desc().c_str(),s->consumer()?s->consumer()->desc().c_str():"")); fds[fd].events |= POLLOUT; } } } catch (IOContext::Destroy&d){ debug(("removing fd due to destroy %p",d.target())); remove(d.target()); } } if(tables_modified()) continue; assert((unsigned)fd==fds_size); if(_async_notify) break; int events; { PermitSignals ps(masked_signals); events = ::poll(fds,fds_size,nonfd_events_pending?0:-1); } for(unsigned i=0;events && i < fds_size;++i) if(fds[i].revents){ Stream*s=_fd_to_stream[fds[i].fd]; do_events(s); if(fds[i].revents&POLLHUP){ debug(("scheduling %p for removal",s)); remove(s); } --events; } } } catch (...){ if(fds) { ::free(fds); fds = 0; } throw; } if(fds) { ::free(fds); fds = 0; } } teepeedee-0.3.0/lib/conf.cc0000664000175000017500000000172110006060162011114 #include #include #include #include #include #include #include #include #include #include "conf.hh" #include "confexception.hh" #include "iocontext.hh" void Conf::get_ipv4_addr(const ConfDB::Key&n,uint32_t&inaddr)const { std::string v; get_line(n,v); if(inet_pton(AF_INET,v.c_str(),&inaddr)<=0) throw ConfException(n,"not an IPv4 address"); } void Conf::get_seconds(const ConfDB::Key&name,std::time_t&out)const { std::string v; get(name,v); if(v.empty()) throw ConfException(name,"empty string: not a valid time_t"); char *s; out = strtoul(v.c_str(),&s,0); if(s == v.c_str()) throw ConfException(name,"not a valid time_T"); } void Conf::get_timeout(const ConfDB::Key&name,IOContext&ioc)const { if(!exists(name)){ ioc.set_timeout_interval(0); return; } time_t t; get_seconds(name,t); ioc.set_timeout_interval(t); } teepeedee-0.3.0/lib/confdb.cc0000664000175000017500000000374710006060162011434 #include #include #include #include #include #include "confdb.hh" class ConfDBIOException : public std::exception { std::string _str; public: ConfDBIOException(const std::string&s) { _str = s; } const char*what()const throw() { return _str.c_str(); } ~ConfDBIOException() throw() { } }; bool ConfDB::exists(const Key&k) { if(_hash.find(k)!=_hash.end())return true; std::string file = make_path(k); struct stat buf; int ret = stat(file.c_str(),&buf); return ret == 0; } bool ConfDB::increment(const Key&k,Numeric amt, Numeric max) { Numeric val=0; if(exists(k)) get_type(k,val); val += amt; if(max && val > max) return false; put_type(k,val); return true; } bool ConfDB::decrement(const Key&k,Numeric amt, Numeric min) { Numeric val = min; if(exists(k)) get_type(k,val); if(min + amt > val) return false; val -= amt; put_type(k,val); return true; } std::string ConfDB::get(const Key&k) { Hash::iterator i = _hash.find(k); if(i != _hash.end()) return (*i).second.get(); std::ifstream file(make_path(k).c_str()); if(!file.good()){ throw ConfException(k,"unable to open file for reading: " + make_path(k)); } std::string val; for(char c;file.good();val+=c){ c = file.get(); } _hash[k] = Value(val); return val; } void ConfDB::put(const Key&k,const std::string&str) { _hash[k].set(str); } void ConfDB::write_out() { std::string badfiles; for(Hash::iterator i = _hash.begin();i!=_hash.end();++i) if(i->second.changed()){ std::ofstream file(make_path(i->first).c_str()); if(!file.good()){ badfiles += make_path(i->first) + " "; continue; } file << i->second.get(); file.close(); if(!file.good()){ badfiles += make_path(i->first) + " "; continue; } i->second.unchange(); } if(!badfiles.empty()) throw ConfDBIOException("unable to sync files: " + badfiles); } teepeedee-0.3.0/lib/iocontextwriter.cc0000664000175000017500000000127407663537155013475 #include #include #include #include #include "unixexception.hh" #include "iocontextwriter.hh" void IOContextWriter::write_out(Stream&stream,size_t max) { if(write_buf_empty()){ do_finished_writing(); if(write_buf_empty()) return; } // the infinite loop round here is too strong and can mean that // retrieves totally take over the server // for(;;){ size_t len = _buf_len - _buf_pos; ssize_t ret; ret = do_write(stream,_buf+_buf_pos,len); _buf_pos += ret; // } // need to tell producer as soon as writing finished or else it gets // confused (FTPControl) if(write_buf_empty()) do_finished_writing(); } teepeedee-0.3.0/lib/iocontextresponder.cc0000664000175000017500000000401707662033373014150 #include #include #include #include #include #include #include #include "time.hh" #include "iocontextresponder.hh" void IOContextResponder::read_done(Stream&stream) { std::cerr << "<< " << remotename() << ": " << std::string(_buf,_buf_write_pos) << std::endl; unsigned tmp = _buf_write_pos; prepare_read(); //might throw exception finished_reading(_buf,tmp); } void IOContextResponder::prepare_io() { if(response_ready()){ if(write_buf_empty()) set_write_buf(_response.c_str(),_response.length()); } else prepare_read(); } void IOContextResponder::write_out(Stream&stream,size_t max) { if(!response_ready()) return; return super::write_out(stream,max); } void IOContextResponder::read_in(Stream&stream,size_t max) { if(response_ready()) return; if(closing()){ delete_this(); } for(char*start = _buf + _buf_write_pos;_buf_write_pos < sizeof _buf; ++start, ++_buf_write_pos ){ // XXX optimize to reduce number of syscalls ssize_t retval; retval = do_read(stream,start,1); switch(retval){ case -1: return; case 1: if(*start == '\n'){ // permit both \r\n and \n for Mr Plato *start = 0; if(_buf_write_pos && *(start-1) == '\r'){ *(start-1) = 0; _buf_write_pos--; } read_done(stream); return; } break; } } _buf_write_pos = 0; input_line_too_long(); } void IOContextResponder::report(bool connecting) { Time now; char buf[50]; now.strftime(buf,sizeof buf,"%a, %d %b %Y %H:%M:%S"); std::cerr << (connecting ?"+++ ": "--- ") << remotename() << ' '; if(connecting) std::cerr << "connecting to " << desc(); else std::cerr <<"closed"; std::cerr<< " at " << buf << '.' << std::setw(6) << std::setfill('0') << now.microseconds() << std::endl; } void IOContextResponder::finished_writing() { std::cerr << ">> " << remotename() << ": " <<_response << std::flush; _response = std::string(); prepare_io(); } teepeedee-0.3.0/lib/sendfile.cc0000664000175000017500000000510510006060067011764 #include #include #include #include "unixexception.hh" #include "sendfile.hh" #include "streamfd.hh" #if defined(HAVE_SENDFILE)&&defined(HAVE_DECL_SENDFILE)&& HAVE_DECL_SENDFILE #ifdef HAVE_SYS_SENDFILE_H #define SENDFILE_FUNCTION_PRESENT // This works on Linux at least #include static ssize_t system_sendfile(int wfd, int rfd) { // XXX check up: suppose it returns 0 but in fact has something left to read? ssize_t ret = sendfile(wfd,rfd,0,(unsigned)-1); if(ret == -1){ if(errno == EAGAIN) return ret; throw UnixException("sendfile"); } return ret; } #else #ifdef HAVE_SYS_UIO_H #include #include #include #include #define SENDFILE_FUNCTION_PRESENT // This one works at least on FreeBSD static ssize_t system_sendfile(int wfd, int rfd) { off_t pos = lseek(rfd,0,SEEK_CUR); if(pos==-1) throw UnixException("lseek before sendfile"); off_t written = 0; int ret = sendfile(rfd,wfd,pos,0,0,&written,0); if(ret == -1) { if(errno == EAGAIN) { if(lseek(rfd,written,SEEK_CUR) == -1) throw UnixException("lseek after sendfile"); return written?written:-1; } throw UnixException("sendfile"); } if(lseek(rfd,written,SEEK_CUR) == -1) throw UnixException("lseek after sendfile complete"); return written;//here ret==0 so the sendfile is complete - should be able to inform } #endif #endif #endif bool Sendfile::io() { if(!_buf) { #ifdef SENDFILE_FUNCTION_PRESENT StreamFD*in,*out; if((in=dynamic_cast(_in))&&(out=dynamic_cast(_out))){ ssize_t ret; try{ ret = system_sendfile(out->fd(),in->fd()); if(ret == 0) { return true; } if(ret != -1){ limit_xfer(ret); } return false; } catch (const UnixException&ue){ } } #endif _buf = new Buf; } if(data_buffered()){ write_out(); if(data_buffered()) return false; } bool ret = read_in(); limit_xfer(_buf->len); if(data_buffered()) write_out(); return ret && !data_buffered(); } void Sendfile::write_out() { ssize_t ret; for(;;){ ret = _out->write(_buf->buffer + _buf->pos,_buf->len - _buf->pos); if(ret == -1) return; _buf->pos += ret; return; } } bool Sendfile::read_in() { ssize_t ret; _buf->pos = 0; _buf->len = 0; for(;;){ try{ ret = _in->read(_buf->buffer,sizeof _buf->buffer); } catch (const Stream::ClosedException&){ return true; } if(ret == -1) return false; _buf->len = ret; return false; } } teepeedee-0.3.0/lib/path.cc0000664000175000017500000000104507661461312011141 #include #include "path.hh" void Path::append(const std::string&name) { const char*start = name.c_str(); const char*end = start + name.length(); for(const char*i=start;i #include "uri.hh" // XXX does not work on strange machines without ascii static char hexdigit(char c) { if(c >= '0' && c <= '9') return c - '0'; if(c >= 'A' && c <= 'F') return c + 10 - 'A'; if(c >= 'a' && c <= 'f') return c + 10 - 'a'; return 0; } static char hexdecode(char i1,char i2) { return hexdigit(i1) << 4 | hexdigit(i2); } static char hexdigitise(int c) { if(0 <= c && 9 >= c) return c + '0'; if(10 <= c && 16 > c) return c + 'A' - 10; return '!'; } static std::string hexencode(char c) { std::string ret; ret += hexdigitise((c >> 4) & 0xf); ret += hexdigitise((c)&0xf); return ret; } std::string URI::quote_percent(const std::string&unquoted) { using std::isalnum; // cannot use std::isalnum directly as not portable to gcc-2.95 + glibc-2 std::string ret; for(std::string::const_iterator i = unquoted.begin(); i != unquoted.end(); ++i){ if(isalnum(*i) || *i == '-' || *i == '_' || *i == '.' || *i == '!' || *i == '~' || *i == '*' || *i == '\'' || *i == '(' || *i == ')' || *i == '/'){ // XXX should not have '/' FIXME ret += *i; } else { ret += '%'; ret += hexencode(*i); } } return ret; } std::string URI::dequote_percent(const std::string&hexencoded) { if(hexencoded.empty()) return std::string(); std::string ret; for(const char*i=hexencoded.c_str();*i;++i){ if(*i == '%'){ if(!i[1] || !i[2]) break; ret += hexdecode(i[1],i[2]); i += 2; } else ret += *i; } return ret; } std::string URI::get_html_quoted()const { std::string ret; if(!_scheme.empty()){ ret += quote_percent(_scheme); ret += ":/"; if(!_authority.empty()) ret += "/"; } ret += quote_percent(_authority); if(!_authority.empty()) ret += '/'; ret += quote_percent(_path.str()); return ret; } void URI::parse_from_authority(const std::string&str) { std::string::size_type len = str.length(); for(std::string::size_type i=0;i= len) return; if(str[start] == '/'){ if(++start >= len) return; if(str[start] == '/'){ parse_from_authority(str.substr(start+1)); return; } parse_from_path(str.substr(start)); return; } } } parse_from_path(str); } teepeedee-0.3.0/lib/dircontainer.cc0000664000175000017500000000132507661461312012667 #include #include "dircontainer.hh" #ifndef HAVE_READDIR_R static int readdir_r(DIR *d, struct dirent *e, struct dirent **r) { errno = 0; // ffs is this stupid *r = readdir(d); if(!*r){ if(errno) return -1; return 0; } return 0; } #endif void DirContainer::iterator::read_next() { if(!_stream) return; struct dirent*e; if(readdir_r(_stream,&_entry,&e)){ warn("readdir_r"); close(); return; } if(!e){ close(); return; } if(e!=&_entry) memcpy(&_entry,e,sizeof _entry); if(_entry.d_name[0] == '.' && (!_entry.d_name[1] || (_entry.d_name[1] == '.' && !_entry.d_name[2]))) read_next(); _entry.d_name[sizeof(_entry.d_name)-1]=0; } teepeedee-0.3.0/lib/stream.cc0000664000175000017500000000415510006060067011472 #include #include #include #include "streamfd.hh" #include "stream.hh" #include "iocontext.hh" void Stream::free() { if(consumer()){ IOContext*tmp = consumer(); release_consumer(); if(tmp->stream_hungup(*this)) delete tmp; } } static int get_socket() { int fd = socket (PF_INET, SOCK_STREAM, 0); if(fd == -1) throw UnixException("socket(PF_INET, SOCK_STREAM, 0)"); return fd; } static StreamFD* bind_to(const sockaddr*addr,socklen_t len) { StreamFD*stream=new StreamFD; try{ stream->fd(get_socket()); stream->set_reuse_addr(); if(addr) if(::bind(stream->fd(),addr,len)) throw UnixException("bind"); return stream; } catch (...){ delete stream; throw; } } Stream* Stream::listen_ipv4_range(uint32_t inaddr,uint16_t port_min,uint16_t port_max) { int tries = port_max - port_min + 1; int port = (std::rand() % tries) + port_min; sockaddr_in name; memset(&name,0,sizeof name); // for NetBSD 1.6 name.sin_family = AF_INET; name.sin_addr.s_addr = inaddr; for(;tries >= 0;--tries){ name.sin_port = htons(port); try{ return listen((const sockaddr*)&name,sizeof name); } catch(const UnixException&ue){ if(ue.get_errno() != EADDRINUSE || tries == 1) throw; } port ++; if(port > port_max) port = port_min; } *(int*)0=0;//can't get here return 0; } static inline unsigned listen_queue_length() { return 128; } Stream* Stream::listen(const sockaddr*addr,socklen_t len) { StreamFD*stream=bind_to(addr,len); try{ if(::listen(stream->fd(),listen_queue_length())){ throw UnixException("listen"); } } catch (...){ delete stream; throw; } return stream; } Stream* Stream::connect(const sockaddr*addr,socklen_t len,const sockaddr*source_addr,socklen_t source_len) { StreamFD*stream=bind_to(source_addr,source_len); try{ int ret = ::connect(stream->fd(),addr,len); if(ret == -1){ if(errno != EINPROGRESS) throw UnixException("connect to user port"); } } catch (...){ delete stream; throw; } return stream; } teepeedee-0.3.0/lib/streamfd.cc0000664000175000017500000000143207662033373012015 #include #include #include #include #include #include "streamfd.hh" static std::string sockaddr_to_str(const sockaddr_in&sai) { std::ostringstream s; char buf[50]; inet_ntop (AF_INET, &sai.sin_addr.s_addr, buf,sizeof buf); s << buf << ':' << ntohs(sai.sin_port); return s.str(); } std::string StreamFD::desc()const { std::ostringstream s; s << "fd " << fd(); try { std::string n = localname(); s << " " << n; } catch (...){ } return s.str(); } std::string StreamFD::localname()const { sockaddr_in sai; Stream::getsockname(sai); return sockaddr_to_str(sai); } std::string StreamFD::remotename()const { sockaddr_in sai; Stream::getpeername(sai); return sockaddr_to_str(sai); } teepeedee-0.3.0/lib/sslstreamfactory.cc0000664000175000017500000000420507743524640013620 #include "sslstreamfactory.hh" #ifdef HAVE_OPENSSL #define _TEEPEEDEE_LIB_IOCONTEXTOPENSSL_I_KNOW_ABOUT_OPENSSL #include #include #include "streamopenssl.hh" #include "iocontextopenssl.hh" #include "streamtable.hh" void SSLStreamFactory::free() { if(_ssl_ctx){ SSL_CTX_free((SSL_CTX*)_ssl_ctx); _ssl_ctx = 0; } } SSLStreamFactory::SSLStreamFactory():_ssl_ctx(0) { _ssl_ctx = SSL_CTX_new(SSLv23_server_method()); if(!_ssl_ctx) throw OpenSSLException("SSL_CTX_new"); // SSL_CTX_set_default_read_ahead((SSL_CTX*)_ssl_ctx,0); SSL_CTX_set_mode((SSL_CTX*)_ssl_ctx,SSL_MODE_ENABLE_PARTIAL_WRITE); //XXX setting this line is necessary at least for IOContextWriter, // but need to check each write to see if it is safe :-( SSL_CTX_set_mode((SSL_CTX*)_ssl_ctx,SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER); } SSLStreamFactory::~SSLStreamFactory() { free(); } Stream* SSLStreamFactory::new_stream(Stream*source,StreamContainer&table) { IOContextOpenSSL*filter = new IOContextOpenSSL((SSL_CTX*)_ssl_ctx); try { Stream*s= new StreamOpenSSL(*filter); source->consumer(filter); table.add(source); return s; } catch (...){ delete filter; throw; } } void SSLStreamFactory::set_keys(const std::string&public_cert_filename, const std::string&private_key_filename) { if(SSL_CTX_use_certificate_chain_file((SSL_CTX*)_ssl_ctx,public_cert_filename.c_str())!=1) throw OpenSSLException("SSL_CTX_use_certificate_chain_file"); if(SSL_CTX_use_PrivateKey_file((SSL_CTX*)_ssl_ctx,private_key_filename.c_str(),SSL_FILETYPE_PEM)!=1) throw OpenSSLException("SSL_CTX_use_PrivateKey_file"); if(SSL_CTX_check_private_key((SSL_CTX*)_ssl_ctx)!=1) throw OpenSSLException("SSL_CTX_check_private_key"); } #else // HAVE_OPENSSL SSLStreamFactory::SSLStreamFactory() { } SSLStreamFactory::~SSLStreamFactory() { } Stream* SSLStreamFactory::new_stream(Stream*source,StreamContainer&table) { return source; } void SSLStreamFactory::set_keys(const std::string&public_cert_filename, const std::string&private_key_filename) { throw UnsupportedException(); } #endif // HAVE_OPENSSL teepeedee-0.3.0/src/0002777000175000017500000000000010006067603007773 5teepeedee-0.3.0/src/user.hh0000664000175000017500000001456210006060067011213 #ifndef _TEEPEEDEE_SRC_USER_HH #define _TEEPEEDEE_SRC_USER_HH #include #include #include #include #include #include #include #include #include #include #include class Path; class FileLister; class Stream; class User { typedef float ratio_t; Conf _conf; std::string _name; // optimizations bool _accounting_upload; bool _accounting_download; // this field only signals whether this particular authentication // object was explicitly initialised with user_login and should decrement // the number of logins of the user when destroyed bool _authenticated; int open_fd(const Path&fname,int flags,mode_t mode=0664) ; std::string get_root()const { std::string root; _conf.get_fsname("homedir",root); return root; } std::string get_path(const Path&path) ; struct access { enum type { none, read, write }; enum node_type { any, file, dir }; private: access() { } }; bool check_access(const Path&path,access::type type,access::node_type node_type) ; bool access_dir(const Path&path,access::type type) { return check_access(path,type,access::dir); } bool access_file(const Path&path,access::type type) { return check_access(path,type,access::file); } bool exists(const Path&path) { return check_access(path,access::none,access::any); } bool may_deletedir(const Path&path) { return may_delete(path); } bool may_delete(const Path&path) ; bool may_listdir(const Path&path) ; bool may_stat(const Path&path) ; bool may_create(const Path&path) ; bool may_createfile(const Path&path) { return may_create(path); } bool may_createdir(const Path&path) { return may_create(path); } ratio_t upload_ratio() { ratio_t rat = 0; _conf.get_if_exists("upload_ratio",rat); return rat; } public: class Stat; private: bool check_access(const Stat&buf,access::type type,access::node_type node_type) ; public: User(): _accounting_upload(true), _accounting_download(true), _authenticated(false) { } User(const User&u):_conf(u._conf), _accounting_upload(u._accounting_upload), _accounting_download(u._accounting_download), _authenticated(false) { } std::string username()const { return _name; } bool authenticated()const { return _authenticated; } // flags may not include O_RDWR Stream* open(const Path&fname,int flags,mode_t mode=0664) ; class AccessException { public: const char*what()const throw() { return "permission denied"; } }; bool stat(const Path&path,Stat&buf) ; bool unlink(const Path&path); bool mkdir(const Path&path); bool rmdir(const Path&path); bool rename(const Path&from,const Path&to) ; bool authenticate(const std::string&username, const std::string&password, const Conf&usersdb) ; void deauthenticate() ; ~User() { deauthenticate(); } off_t xfer_total(XferLimit::Direction::type dir,bool do_lock=true) { std::string name = XferLimit::Direction::to_string(dir)+"_bytes"; off_t current = 0; _conf.get_atomically_if_exists(name,current); return current; } off_t xfer_limit(XferLimit::Direction::type dir) { std::string name = XferLimit::Direction::to_string(dir)+"_bytes_max"; off_t ret = 0; _conf.get_if_exists(name,ret); if(dir==XferLimit::Direction::download){ ratio_t ratio = upload_ratio(); if(!ratio) return ret; ret += off_t(ratio * xfer_total(XferLimit::Direction::upload)); } return ret; } bool book_xfer(off_t bytes,XferLimit::Direction::type dir) { if(dir == XferLimit::Direction::download && !_accounting_download) return true; if(dir == XferLimit::Direction::upload && !_accounting_upload) return true; return _conf.book_increment(XferLimit::Direction::to_string(dir)+"_bytes",xfer_limit(dir),bytes); } std::string message_login() ; std::string message_limits() ; std::string message_directory(const Path&path) ; // returned filelister should be deleted FileLister* list(const Path&path) ; FileLister* list_one(const Path&path) ; FileLister* listdir(const Path&path) ; bool may_chdir(const Path&path) ; bool may_deletefile(const Path&path) { return may_delete(path); } bool may_readfile(const Path&path) ; bool may_writefile(const Path&path) ; class Stat { struct stat _stat; protected: friend class User; bool stat(const std::string&pathname) { return !::stat(pathname.c_str(),&_stat); } bool fstat(int fd) { return !::fstat(fd,&_stat); } public: bool is_dir()const { return S_ISDIR(_stat.st_mode); } bool is_file()const { return S_ISREG(_stat.st_mode); } bool may_read()const { if(! (S_IROTH & _stat.st_mode)) return false; if(is_dir()) if(! (S_IXOTH & _stat.st_mode)) return false; return true; } bool may_write()const { if(getuid() != _stat.st_uid) return false; if(getgid() != _stat.st_gid) return false; if(! (S_IWUSR & _stat.st_mode)) return false; if(! (S_IWGRP & _stat.st_mode)) return false; return true; } std::string rwx_string()const { std::string ret; if(is_dir()) ret += "d"; else ret += "-"; std::string perms; perms += may_read() ? "r" : "-"; perms += may_write() ? "w" : "-"; perms += S_IXOTH & _stat.st_mode ? "x" : "-"; ret += perms + perms + perms; return ret; } unsigned nlink()const { return _stat.st_nlink; } std::string username()const { return "ftp"; } std::string groupname()const { return "ftp"; } off_t size()const { return _stat.st_size; } std::time_t mtime()const { return _stat.st_mtime; } }; private: void do_print_limit(std::ostream&limits,XferLimit::Direction::type dir) ; bool verify_password(const std::string&username, const std::string&password, const Conf&usersdb) ; }; #endif teepeedee-0.3.0/src/serverhttp.hh0000664000175000017500000000057410006060067012441 #ifndef _TEEPEEDEE_SRC_SERVERHTTP_HH #define _TEEPEEDEE_SRC_SERVERHTTP_HH #include "server.hh" class ServerHTTP : public Server { public: ServerHTTP(Conf&c):Server(c) { } IOContext* new_iocontext() ; static Server* factory(Conf&c) { return new ServerHTTP(c); } std::string desc()const { return "http " + Server::desc(); } }; #endif teepeedee-0.3.0/src/server.hh0000664000175000017500000000136710006060067011542 #ifndef _TEEPEEDEE_SRC_SERVER_HH #define _TEEPEEDEE_SRC_SERVER_HH #include #include class Server:public IOContextListener { typedef IOContextListener super; Conf _conf; // bool // full() // { // return !config().book_increment("unauthenticated_connections",0); // } // bool // increment() // { // return config().book_increment("unauthenticated_connections",1); // } // void // decrement() // { // return config().book_decrement("unauthenticated_connections",1); // } protected: Conf& config() { return _conf; } public: Server(Conf&conf):_conf(conf) { } typedef Server* (*Factory)(Conf&conf); virtual Stream* read_config() ; }; #endif teepeedee-0.3.0/src/httpcontrol.hh0000664000175000017500000000766510006060067012623 #ifndef _TEEPEEDEE_SRC_HTTPCONTROL_HH #define _TEEPEEDEE_SRC_HTTPCONTROL_HH #include #include #include #include #include #include "user.hh" #include "control.hh" class User; class Path; class HTTPControl : public Control { typedef Control super; std::string _req_method; URI _req_uri; bool _req_uri_is_dir; unsigned _req_ver_major; unsigned _req_ver_minor; std::string _protocol; IOContextControlled* _xfer; typedef std::map _req_headers_type; _req_headers_type _req_headers; bool has_req_header(const std::string&name) { return _req_headers.find(name) != _req_headers.end(); } std::string mimetype(const Path&path) ; bool persistant() ; bool try_authenticate(User&user) ; void authenticate(User&u); void finished_queuing_response() // may be called multiple times { if(!persistant()) close_after_output(); reset_req(); } bool has_req_body() { return has_req_header("content-length") || has_req_header("content-encoding"); } unsigned max_req_headers()const { return 100; } bool has_req_line()const { return !_req_method.empty(); } void parse_req_line(char*buf,size_t len) ; void parse_header(char*buf,size_t len) ; void finished_req() ; void finished_header_line(const std::string&name,const std::string&val) { if(_req_headers.size() > max_req_headers()){ error_response("500","Too many headers"); return; } if(_req_headers.find(name) != _req_headers.end()) _req_headers[name] += ", " + val; else _req_headers[name] = val; } void reset_req() { _req_method = std::string(); _req_headers.clear(); _req_ver_minor = 0; _req_ver_major = 0; _req_uri_is_dir = false; } void error_response(const std::string& code,const std::string& str) ; void start_xfer(IOContextControlled*xfer,Stream*st=0); void start_file_xfer(Stream*fd, const std::string&filename, User&user, XferLimit::Direction::type dir) ; void status_line(const std::string& code,const std::string& str) { add_response("HTTP/1.1 " + code + " " + str + "\r\n"); } void response_header_line(const std::string& name, const std::string& value) { add_response(name + ": " + value + "\r\n"); } void response_header_line(const std::string& name, unsigned long value) ; void moved_to_response(const std::string& path) ; void response_header_end() ; Path get_uri_path()const ; // XXX TODO announce continue void do_cmd_get(bool actually_send_data) ; void do_get_file(const Path&file,User::Stat&buf,User&user,bool actually_send_data) ; void do_get_dirlisting(const Path&dir,User&user,bool actually_send_data) ; void cmd_put() ; void cmd_options() ; void cmd_delete() ; void cmd_trace() ; void cmd_get() { do_cmd_get(true); } void cmd_head() { do_cmd_get(false); } void delete_xfer(IOContext*ioc) { if(ioc == _xfer){ free_xfer(); return; } delete ioc; } void free_xfer() { if(_xfer){ delete _xfer; _xfer=0; } } protected: void finished_reading(char*buf,size_t len) ; void read_in(Stream&stream,size_t max) ; void write_out(Stream&stream,size_t max) ; void read_in_xfer(Stream&stream,size_t max) ; void write_out_xfer(Stream&stream,size_t max) ; public: HTTPControl(const Conf&c,StreamContainer&,const std::string& proto="http") ; void xfer_done(IOContextControlled*xfer,bool successful) ; bool want_write(Stream&stream) ; bool want_read(Stream&stream) ; std::string desc()const { return _protocol + " " + super::desc(); } ~HTTPControl() { free_xfer(); } }; #endif teepeedee-0.3.0/src/httplist.hh0000664000175000017500000000066307662033373012123 #ifndef _TEEPEEDEE_SRC_HTTPLIST_HH #define _TEEPEEDEE_SRC_HTTPLIST_HH #include #include class HTTPList:public IOContextList { bool _finished; User _user; protected: void finished_listing(); void prepare_entry() ; public: HTTPList(IOController*fc,FileLister*fl,const User&u) ; std::string desc()const { return "HTTP " + IOContextList::desc(); } }; #endif teepeedee-0.3.0/src/control.hh0000664000175000017500000000203410006060067011704 #ifndef _TEEPEEDEE_SRC_CONTROL_HH #define _TEEPEEDEE_SRC_CONTROL_HH #include #include #include #include class StreamContainer; class User; class Control : public IOContextResponder, public IOController { typedef IOContextResponder super; StreamContainer&_stream_container; Conf _conf; bool _authenticated; void decrement() ; void increment(); protected: Conf&config(){return _conf; } StreamContainer& stream_container() { return _stream_container; } public: Control(const Conf&conf,StreamContainer&s):_stream_container(s), _conf(conf),_authenticated(false) { increment();//yes may throw exception } bool user_login_default(User&user,const std::string&password=std::string()) ; bool user_login(User&user,const std::string&username,const std::string&password) ; std::string desc()const { return "protocol control connection " + super::desc(); } ~Control() { decrement(); } }; #endif teepeedee-0.3.0/src/serverregistration.hh0000664000175000017500000000151607662033373014207 #ifndef _TEEPEEDEE_SRC_SERVERREGISTRATION_HH #define _TEEPEEDEE_SRC_SERVERREGISTRATION_HH #include #include #include "server.hh" class ServerRegistration { std::string _name; Server::Factory _factory; std::string _desc; ServerRegistration*_next; public: static ServerRegistration*registered_list; ServerRegistration(const std::string&n,Server::Factory f,const std::string&d) :_name(n), _factory(f), _desc(d) { if(!registered_list){ registered_list = this; return; } ServerRegistration*parent; for(parent=registered_list;parent->_next;parent=parent->_next); parent->_next = this; } std::string name()const { return _name; } Server::Factory factory()const { return _factory; } ServerRegistration* next() { return _next; } }; #endif teepeedee-0.3.0/src/serverhttps.hh0000664000175000017500000000066710006060067012627 #ifndef _TEEPEEDEE_SRC_SERVERHTTPS_HH #define _TEEPEEDEE_SRC_SERVERHTTPS_HH #include "serverhttp.hh" #include "serverssl.hh" class ServerHTTPS : public ServerSSL { typedef ServerSSL super; public: ServerHTTPS(Conf&c):super(c) { } static Server* factory(Conf&c) { return new ServerHTTPS(c); } IOContext* new_iocontext() ; std::string desc()const { return "http " + super::desc(); } }; #endif teepeedee-0.3.0/src/ftpcontrol.hh0000664000175000017500000001752610006060067012432 #ifndef _TEEPEEDEE_SRC_FTPCONTROL_HH #define _TEEPEEDEE_SRC_FTPCONTROL_HH #include #include #include #include #include #include #include #include "control.hh" #include "user.hh" class FTPDataListener; class IOContextControlled; class StreamContainer; class SSLStreamFactory; class FTPControl : public Control { typedef Control super; User _user; FTPDataListener*_data_listener;//for passive mode IOContextControlled*_data_xfer; SSLStreamFactory*_ssl_factory; // These values are things cached for the FTP protocol std::string _username; // not necessarily the logged in user's username Path _path; sockaddr_in _port_addr; sockaddr_in _local_addr; off_t _restart_pos; Path _rename_from; bool _quitting; bool _turning_into_ssl; Stream*_unencrypted_stream; bool encrypted()const { return _unencrypted_stream; } struct ftp_cmd { typedef void (FTPControl::*function_type)(const std::string&argument); const char*name; function_type function; const char*desc; }; static const ftp_cmd ftp_cmd_table[]; off_t take_restart_pos() { off_t tmp = _restart_pos; _restart_pos = 0; return tmp; } bool restart(Stream*fd) ; bool passive()const { return _data_listener != 0; } // return true if good login bool login(const std::string&password) ; void command(const std::string&name,const std::string& argument) ; bool passive_on(bool epsv=false) ; bool passive_off() ; bool active_on() ; void start_file_xfer(const Path&path, XferLimit::Direction::type dir) ; void start_xfer(IOContextControlled*xfer, Stream*fd=0) ; void lose_auth() { _user.deauthenticate(); _username = std::string(); _restart_pos = 0; _rename_from.clear(); _path.clear(); } void make_response_proto_not_supported() { make_response("522","Network protocol not supported, use (1)"); } void make_response(const std::string&code,const std::string&str,char connector=' ') ; void make_response_multiline(const std::string&code,const std::string&multiline); void make_error(const std::string&str) { make_response("421",str); close_after_output(); } bool xfer_pending()const { return _data_xfer; } class InappropriateCommandException { }; class UnauthenticatedException:public InappropriateCommandException { }; class XferPendingException: public InappropriateCommandException { }; void assert_auth() { if(!_user.authenticated()) throw UnauthenticatedException(); } void assert_no_xfer() { if(xfer_pending()) throw XferPendingException(); } void cmd_user(const std::string&argument) { _username = argument; make_response("331","What's the secret password?"); } void cmd_pass(const std::string&argument) ; void cmd_stat(const std::string&argument) { assert_auth(); if(argument.empty()) { make_response("504","STAT not implemented with argument"); return; } make_response("211",xfer_pending() ? "Transfer progressing" : "No transfer"); } void cmd_help(const std::string&argument) ; void cmd_feat(const std::string&argument) ; void cmd_mdtm(const std::string&argument) ; void cmd_size(const std::string&argument) ; void cmd_mlst(const std::string&argument) ; void cmd_mlsd(const std::string&argument) ; void cmd_rein(const std::string&argument) { lose_auth(); make_response("220","Hit me one more time baby"); } void cmd_quit(const std::string&argument) { lose_auth(); make_response("221","Closing control connection"); if(!xfer_pending()) close_after_output(); _quitting = true; } void cmd_noop(const std::string&argument) { make_response("200","I did nothing!"); } void cmd_syst(const std::string&argument) { make_response("215","UNIX Type: L8"); } void cmd_type(const std::string&argument) { assert_auth(); if(argument == "I" || argument == "A") make_response("200","TYPE irrelevant, nothing is ever mangled"); else make_response("504","Is there any point in implementing this TYPE?"); } void cmd_mode(const std::string&argument) { assert_auth(); if(argument == "S") make_response("200","MODE S is the only one supported"); else make_response("504","Is there any point in implementing this MODE?"); } void cmd_stru(const std::string&argument) { assert_auth(); if(argument == "F") make_response("200","STRU F is the only one supported"); else make_response("504","Is there any point in implementing this STRU?"); } void cmd_pasv(const std::string&argument) { assert_auth(); if(!passive_on()){ make_response("502","Passive mode not available at the moment"); } } void cmd_pwd(const std::string&argument) { assert_auth(); make_response("257","\"/" + _path.str() + "\" is current directory."); } void cmd_abor(const std::string&argument) ; void cmd_cdup(const std::string&argument) { assert_auth(); cmd_cwd(".."); } void cmd_nlst(const std::string&argument) { do_cmd_list(argument,false); } void cmd_list(const std::string&argument) { do_cmd_list(argument,true); } void cmd_rnfr(const std::string&argument) { assert_auth(); _rename_from = _path; _rename_from.chdir(argument); make_response("350","Where to boss?"); } void cmd_rnto(const std::string&argument) { assert_auth(); Path to(_path,argument); if(to.empty()||_rename_from.empty()) { make_response("553","Give me names, names"); return; } if(!_user.rename(_rename_from,to)) make_response("550","Cannot change name, try deed poll"); else make_response("250","Aye aye, captain"); _rename_from.clear(); } void cmd_cwd(const std::string&argument) ; void cmd_dele(const std::string&argument) ; void cmd_epsv(const std::string&argument) ; void cmd_eprt(const std::string&argument) ; void cmd_auth(const std::string&argument) ; void cmd_pbsz(const std::string&argument) ; void cmd_port(const std::string&argument) ; void cmd_retr(const std::string&argument) ; void cmd_stor(const std::string&argument) ; void cmd_rest(const std::string&argument) ; void cmd_mkd(const std::string&argument) { assert_auth(); if(!_user.mkdir(Path(_path,argument))) make_response("550","Directory impossible"); else make_response("257","Directory made extremely well"); } void cmd_rmd(const std::string&argument) { assert_auth(); if(!_user.rmdir(Path(_path,argument))) make_response("550","Utterly incapable of removing directory, is it empty?"); else make_response("250","Directory soundly deleted"); } void do_cmd_list(const std::string&argument,bool detailed) ; protected: void finished_reading(char*buf,size_t len) ; void input_line_too_long() { make_error("Input line too long for my attention span"); } bool stream_hungup(Stream&stream) ; void timedout(Stream&stream) { if(!response_ready()){ make_error("Got bored waiting"); return; } return super::timedout(stream); } protected: void read_in(Stream&stream,size_t max) ; public: FTPControl(const Conf&conf,StreamContainer&sc,SSLStreamFactory*ssf=0) ; void remote_stream(const Stream&stream) ; void xfer_done(IOContextControlled*xfer,bool successful); ; std::string desc()const { return "ftp " + super::desc(); } ~FTPControl() ; }; #endif teepeedee-0.3.0/src/ftpdatalistener.hh0000664000175000017500000000233407663537155013446 #ifndef _TEEPEEDEE_FTPDATALISTENER_HH #define _TEEPEEDEE_FTPDATALISTENER_HH #include #include class IOContext; class FTPDataListener : public IOContextListener, public IOContextControlled { typedef IOContextListener super; IOContext*_data; bool _finished; bool finished()const { return _finished; } protected: void // return true if want to read more read_in(Stream&stream,size_t max) { if(finished()){ delete_this(); return; } if(!has_data())return; super::read_in(stream,max); } public: FTPDataListener(IOController*f):IOContextControlled(f), _data(0), _finished(false) { } void set_data(IOContext*fdc) ; void release_data() { _data = 0; _finished = true; } bool has_data()const { return _data != 0; } void free() { if(has_data()){ delete _data; } release_data(); } IOContext* new_iocontext() ; bool want_read(Stream&stream) { if(finished()){ delete_this(); return false; } if(!has_data()){ return false; } return super::want_read(stream); } ~FTPDataListener() { free(); } }; #endif teepeedee-0.3.0/src/ftplist.hh0000664000175000017500000000062107600570464011726 #ifndef _TEEPEEDEE_FTPLIST_HH #define _TEEPEEDEE_FTPLIST_HH #include #include class FTPList:public IOContextList { protected: void prepare_entry() { set_entry(entry_name()+"\r\n"); } public: FTPList(IOController*fc,FileLister*fl): IOContextList(fc,fl) { } std::string desc()const { return "FTP " + IOContextList::desc(); } }; #endif teepeedee-0.3.0/src/ftplistlong.hh0000664000175000017500000000072107600570464012607 #ifndef _TEEPEEDEE_FTPLISTLONG_HH #define _TEEPEEDEE_FTPLISTLONG_HH #include "ftplist.hh" class User; class FTPListLong:public FTPList { User _user; protected: void prepare_entry() ; public: FTPListLong(IOController*fc,const User&u,FileLister*fl): FTPList(fc,fl),_user(u) { set_entry("total 0\r\n"); // don't bother to figure out what it should be } std::string desc()const { return "Long " + FTPList::desc(); } }; #endif teepeedee-0.3.0/src/ftplistmlsd.hh0000664000175000017500000000075007600570464012611 #ifndef _TEEPEEDEE_FTPLISTMLSD_HH #define _TEEPEEDEE_FTPLISTMLSD_HH #include #include class FTPListMlsd:public FTPList { FTPMlstPrinter _printer; protected: void prepare_entry() { set_entry(_printer.line(virtual_path())+"\r\n"); } public: FTPListMlsd(IOController*fc,FileLister*fl,const FTPMlstPrinter&c): FTPList(fc,fl), _printer(c) { } std::string desc()const { return "MLSD " + FTPList::desc(); } }; #endif teepeedee-0.3.0/src/ftpmlstprinter.hh0000664000175000017500000000235607662033373013346 #ifndef _TEEPEEDEE_SRC_FTPMLSTPRINTER_HH #define _TEEPEEDEE_SRC_FTPMLSTPRINTER_HH #include #include #include #include class FTPMlstPrinter { User _user; public: FTPMlstPrinter(const User&u):_user(u) { } static std::string mtime(std::time_t mtime) { struct tm tmbuf; struct tm *split_mtime = gmtime_r(&mtime,&tmbuf); char datebuf[64]; if(!std::strftime(datebuf,sizeof datebuf,"%Y%m%d%H%M%S",split_mtime)){ warn("strftime"); strcpy(datebuf,"00000000000000"); } datebuf[sizeof(datebuf)-1]=0; return datebuf; } std::string line(const Path&p) { return facts(p) + "; /" + p.str(); } std::string facts(const Path&p) { try { User::Stat buf; std::ostringstream s; s << "Perm="; if(!_user.stat(p,buf)) return s.str(); if(buf.may_read()) { if(buf.is_dir()) s << 'e'; s << 'r'; } if(buf.may_write()){ s << 'w'; } s << ";Size=" << buf.size(); if(buf.is_file()) s << ";Type=file"; if(buf.is_dir()) s << ";Type=dir"; s << ";Modified=" << mtime(buf.mtime()); return s.str(); } catch (User::AccessException&ue){ return "Perm="; } } }; #endif teepeedee-0.3.0/src/xferlimituser.hh0000664000175000017500000000112407662033373013143 #ifndef _TEEPEEDEE_LIB_XFERLIMITUSER_HH #define _TEEPEEDEE_LIB_XFERLIMITUSER_HH #include #include "user.hh" class XferLimitUser : public XferLimit { User _user; protected: virtual bool // true if allowed to xfer that many bytes book_xfer(off_t bytes,Direction::type dir) { return _user.book_xfer(bytes,dir); }; public: XferLimitUser(const User&u, Direction::type dir, const std::string& remotename, const std::string& service, const std::string&resource ):XferLimit(dir,remotename,service,resource,u.username()), _user(u) { } }; #endif teepeedee-0.3.0/src/serverssl.hh0000664000175000017500000000154110006060067012256 #ifndef _TEEPEEDEE_SRC_SERVERSSL_HH #define _TEEPEEDEE_SRC_SERVERSSL_HH #include #include class ServerSSL:public Server,public SSLStreamFactory { typedef Server super; public: ServerSSL(Conf&conf):super(conf) { } Stream* read_config() { Stream*ret=super::read_config(); try{ read_config_ssl(); } catch (...){ ret->release_consumer(); delete ret; throw; } return ret; } void read_config_ssl() { std::string pub,priv; config().get_fsname("public_cert",pub); config().get_fsname("private_key",priv); set_keys(pub,priv); } Stream* new_stream(Stream*source,StreamContainer&table) { return SSLStreamFactory::new_stream(source,table); } std::string desc()const { return "SSL/TLS " + super::desc(); } }; #endif teepeedee-0.3.0/src/serverftp.hh0000664000175000017500000000175410006060067012254 #ifndef _TEEPEEDEE_SRC_SERVERFTP_HH #define _TEEPEEDEE_SRC_SERVERFTP_HH #include #include #include "server.hh" #include "serverssl.hh" class ServerFTP : public ServerSSL { typedef ServerSSL super; bool _ssl_available; public: ServerFTP(Conf&c):ServerSSL(c),_ssl_available(false) { } IOContext* new_iocontext() ; static Server* factory(Conf&conf) { return new ServerFTP(conf); } std::string desc()const { return "ftp " + Server::desc(); } Stream* new_stream(Stream*s,StreamContainer&) { return s; } Stream* read_config() { _ssl_available = false; Stream*ret=Server::read_config(); try{ read_config_ssl(); _ssl_available = true; } catch (const SSLStreamFactory::UnsupportedException&ue){ } catch (const std::exception&e){ warnx("SSL not available for server at %s because %s",config().get_name().c_str(),e.what()); } catch (...){ } return ret; } }; #endif teepeedee-0.3.0/src/Makefile.am0000664000175000017500000000130610006066444011745 bin_PROGRAMS = teepeedee bin_SCRIPTS = teepeedee-share EXTRA_DIST = teepeedee-share teepeedee_SOURCES = main.cc \ user.cc \ serverhttp.cc \ server.cc \ httpcontrol.cc \ httplist.cc \ control.cc \ serverhttps.cc \ serverftp.cc \ ftpcontrol.cc \ ftpdatalistener.cc \ ftplistlong.cc noinst_HEADERS = user.hh \ serverhttp.hh \ server.hh \ httpcontrol.hh \ httplist.hh \ control.hh \ serverregistration.hh \ serverhttps.hh \ ftpcontrol.hh \ ftpdatalistener.hh \ ftplist.hh \ ftplistlong.hh \ ftplistmlsd.hh \ ftpmlstprinter.hh \ xferlimituser.hh \ serverssl.hh \ serverhttps.hh \ serverftp.hh teepeedee_LDADD = ../lib/libteepeedee.a -lcrypt INCLUDES = -I$(srcdir)/../lib teepeedee-0.3.0/src/Makefile.in0000664000175000017500000003615010006067574011770 # Makefile.in generated by automake 1.8.2 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ SOURCES = $(teepeedee_SOURCES) srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = .. am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : bin_PROGRAMS = teepeedee$(EXEEXT) subdir = src DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(mkdir_p) CONFIG_CLEAN_FILES = am__installdirs = $(DESTDIR)$(bindir) $(DESTDIR)$(bindir) binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) PROGRAMS = $(bin_PROGRAMS) am_teepeedee_OBJECTS = main.$(OBJEXT) user.$(OBJEXT) \ serverhttp.$(OBJEXT) server.$(OBJEXT) httpcontrol.$(OBJEXT) \ httplist.$(OBJEXT) control.$(OBJEXT) serverhttps.$(OBJEXT) \ serverftp.$(OBJEXT) ftpcontrol.$(OBJEXT) \ ftpdatalistener.$(OBJEXT) ftplistlong.$(OBJEXT) teepeedee_OBJECTS = $(am_teepeedee_OBJECTS) teepeedee_DEPENDENCIES = ../lib/libteepeedee.a binSCRIPT_INSTALL = $(INSTALL_SCRIPT) SCRIPTS = $(bin_SCRIPTS) DEFAULT_INCLUDES = -I. -I$(srcdir) depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles @AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/control.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/ftpcontrol.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/ftpdatalistener.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/ftplistlong.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/httpcontrol.Po ./$(DEPDIR)/httplist.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/main.Po ./$(DEPDIR)/server.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/serverftp.Po ./$(DEPDIR)/serverhttp.Po \ @AMDEP_TRUE@ ./$(DEPDIR)/serverhttps.Po ./$(DEPDIR)/user.Po CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) CXXLD = $(CXX) CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) \ -o $@ SOURCES = $(teepeedee_SOURCES) DIST_SOURCES = $(teepeedee_SOURCES) HEADERS = $(noinst_HEADERS) ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ HAVE_OPENSSL = @HAVE_OPENSSL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_RANLIB = @ac_ct_RANLIB@ ac_ct_STRIP = @ac_ct_STRIP@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ bindir = @bindir@ build_alias = @build_alias@ datadir = @datadir@ exec_prefix = @exec_prefix@ host_alias = @host_alias@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ prefix = @prefix@ program_transform_name = @program_transform_name@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ bin_SCRIPTS = teepeedee-share EXTRA_DIST = teepeedee-share teepeedee_SOURCES = main.cc \ user.cc \ serverhttp.cc \ server.cc \ httpcontrol.cc \ httplist.cc \ control.cc \ serverhttps.cc \ serverftp.cc \ ftpcontrol.cc \ ftpdatalistener.cc \ ftplistlong.cc noinst_HEADERS = user.hh \ serverhttp.hh \ server.hh \ httpcontrol.hh \ httplist.hh \ control.hh \ serverregistration.hh \ serverhttps.hh \ ftpcontrol.hh \ ftpdatalistener.hh \ ftplist.hh \ ftplistlong.hh \ ftplistmlsd.hh \ ftpmlstprinter.hh \ xferlimituser.hh \ serverssl.hh \ serverhttps.hh \ serverftp.hh teepeedee_LDADD = ../lib/libteepeedee.a -lcrypt INCLUDES = -I$(srcdir)/../lib all: all-am .SUFFIXES: .SUFFIXES: .cc .o .obj $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --gnu src/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh install-binPROGRAMS: $(bin_PROGRAMS) @$(NORMAL_INSTALL) $(mkdir_p) $(DESTDIR)$(bindir) @list='$(bin_PROGRAMS)'; for p in $$list; do \ p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ if test -f $$p \ ; then \ f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ echo " $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f"; \ $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f || exit 1; \ else :; fi; \ done uninstall-binPROGRAMS: @$(NORMAL_UNINSTALL) @list='$(bin_PROGRAMS)'; for p in $$list; do \ f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ echo " rm -f $(DESTDIR)$(bindir)/$$f"; \ rm -f $(DESTDIR)$(bindir)/$$f; \ done clean-binPROGRAMS: -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) teepeedee$(EXEEXT): $(teepeedee_OBJECTS) $(teepeedee_DEPENDENCIES) @rm -f teepeedee$(EXEEXT) $(CXXLINK) $(teepeedee_LDFLAGS) $(teepeedee_OBJECTS) $(teepeedee_LDADD) $(LIBS) install-binSCRIPTS: $(bin_SCRIPTS) @$(NORMAL_INSTALL) $(mkdir_p) $(DESTDIR)$(bindir) @list='$(bin_SCRIPTS)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ if test -f $$d$$p; then \ f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \ echo " $(binSCRIPT_INSTALL) $$d$$p $(DESTDIR)$(bindir)/$$f"; \ $(binSCRIPT_INSTALL) $$d$$p $(DESTDIR)$(bindir)/$$f; \ else :; fi; \ done uninstall-binSCRIPTS: @$(NORMAL_UNINSTALL) @list='$(bin_SCRIPTS)'; for p in $$list; do \ f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \ echo " rm -f $(DESTDIR)$(bindir)/$$f"; \ rm -f $(DESTDIR)$(bindir)/$$f; \ done mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/control.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ftpcontrol.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ftpdatalistener.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ftplistlong.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/httpcontrol.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/httplist.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/main.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/server.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/serverftp.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/serverhttp.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/serverhttps.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/user.Po@am__quote@ .cc.o: @am__fastdepCXX_TRUE@ if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ @am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ $< .cc.obj: @am__fastdepCXX_TRUE@ if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ @am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` uninstall-info-am: ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(ETAGS_ARGS)$$tags$$unique" \ || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkdir_p) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(PROGRAMS) $(SCRIPTS) $(HEADERS) installdirs: $(mkdir_p) $(DESTDIR)$(bindir) $(DESTDIR)$(bindir) install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-binPROGRAMS clean-generic mostlyclean-am distclean: distclean-am -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-am dvi-am: html: html-am info: info-am info-am: install-data-am: install-exec-am: install-binPROGRAMS install-binSCRIPTS install-info: install-info-am install-man: installcheck-am: maintainer-clean: maintainer-clean-am -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS \ uninstall-info-am .PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \ clean-generic ctags distclean distclean-compile \ distclean-generic distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-binPROGRAMS \ install-binSCRIPTS install-data install-data-am install-exec \ install-exec-am install-info install-info-am install-man \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \ tags uninstall uninstall-am uninstall-binPROGRAMS \ uninstall-binSCRIPTS uninstall-info-am # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: teepeedee-0.3.0/src/main.cc0000664000175000017500000000663210006060067011146 #include #include #include #include #include #include #include #ifdef HAVE_OPENSSL #include #endif #include #include #include #include #include #include "confdb.hh" #include "conf.hh" #include "serverregistration.hh" ServerRegistration* ServerRegistration::registered_list; static void load_servers(StreamTable&xt,Conf&conf,Server::Factory factory) { typedef std::list config_keys_t; config_keys_t config_keys; conf.get_subkeys(config_keys); for(config_keys_t::iterator i = config_keys.begin();i!=config_keys.end();++i) { Conf sc(conf,*i); Server *fl = factory(sc); fl->stream_container(&xt); try { xt.add(fl->read_config()); } catch(std::exception&e){ warnx("%s",e.what()); warnx("server config \"%s\" bad",sc.get_name().c_str()); delete fl; } } } static StreamTable*running_table; static void stop_table(int signal) { // strsignal is a GNU extension warnx("received signal %d, shutting down",signal); if(running_table) running_table->async_notify_stop(); } static ConfDB*running_db; static void sync_conf_db(int signum) { warnx("received signal %d, sync'ing configuration",signum); try{ if(running_db) running_db->sync(); } catch(const std::exception&e){ warnx("error sync'ing: %s",e.what()); }catch (...){ warnx("caught unknown exception sync'ing configuration"); abort(); } } static void start_servers(const std::string&configdir) { ConfDB db(configdir); { running_db = &db; StreamTable xt; for(ServerRegistration* i=ServerRegistration::registered_list; i;i=i->next()){ Conf sc(db,i->name()); load_servers(xt,sc,(*i).factory()); } if(xt.empty()) errx(1,"no valid servers specified in \"%s\"",configdir.c_str()); running_table = &xt; { const int signals[] = { SIGINT, SIGTERM, SIGUSR1, NSIG }; sigset_t ss; sigemptyset(&ss); for(int const*i=signals;*i!=NSIG;++i) sigaddset(&ss,*i); sigprocmask(SIG_BLOCK,&ss,0); Signal sigint(SIGINT,stop_table); Signal sigterm(SIGTERM,stop_table); Signal sigusr1(SIGUSR1,sync_conf_db); xt.poll(signals); running_db = 0; } running_table = 0; } db.sync(); } static void set_signals() { if(signal(SIGPIPE,SIG_IGN) == SIG_ERR) throw UnixException("signal(SIG_PIPE,SIG_IGN)"); } static void set_umask() { // allow us to create world writable files or else teepeedee will // still create files in group writable directories, but will refuse // to write to them as they have too restrictive write permissions. umask(0002); } static void setup_openssl() { #ifdef HAVE_OPENSSL SSL_load_error_strings(); SSL_library_init(); #endif } int main(int argc,char*argv[]) { try{ std::srand(std::time(0)); set_signals(); set_umask(); setup_openssl(); start_servers((argc > 1 && argv[1]) ? argv[1] : TPD_CONFIGDIR); } catch(std::bad_exception&be){ errx(1,"bad exception: %s",be.what()); } catch (ConfException&ce){ errx(1,"misconfiguration: %s",ce.what()); } catch(std::exception&e){ warnx("%s",e.what()); errx(1,"exiting due to uncaught exception"); } catch(...){ errx(1,"uncaught unknown exception"); } return 0; } teepeedee-0.3.0/src/user.cc0000664000175000017500000002146410006060067011200 #include #include #include #include #include #include #include #include #ifdef HAVE_CRYPT_H #include #endif #include #include #include #include #include #include #include "user.hh" static const unsigned max_username_length = 200; Stream* User::open(const Path&fname,int flags,mode_t mode) { int fd = open_fd(fname,flags,mode); try{ return new StreamFD(fd); } catch(...){ close(fd); throw; } } int User::open_fd(const Path&fname,int flags,mode_t mode) { bool exist = exists(fname); if((flags&O_ACCMODE) == O_WRONLY) { if((exist && !may_writefile(fname)) // obvious race! || (!exist && !may_createfile(fname))) throw AccessException(); off_t max = xfer_limit(XferLimit::Direction::upload); if(max){ off_t current = xfer_total(XferLimit::Direction::upload); if(current >= max) throw XferLimitException(); } } else if (!exist) throw AccessException(); if(exist && (flags&O_ACCMODE) == O_RDONLY) if(!may_readfile(fname)) throw AccessException(); int fd = ::open(get_path(fname).c_str(),flags,mode); if(fd == -1) throw UnixException("open"); Stat buf; if(!buf.fstat(fd)){ close(fd); throw AccessException(); } if(((flags&O_ACCMODE) == O_WRONLY && !buf.may_write()) || ((flags&O_ACCMODE) == O_RDONLY && !buf.may_read())){ close(fd); throw AccessException(); } return fd; } FileLister* User::list_one(const Path&path) { User::Stat buf; if(!stat(path,buf)) return new FileListerNone(); return new FileListerFile(path); } FileLister* User::listdir(const Path&path) { if(!may_listdir(path)) throw AccessException(); FileListerDir* fld = new FileListerDir(get_path(path),path); int fd = fld->get_fd(); if(fd != -1) { Stat buf; if(!buf.fstat(fd) || !check_access(buf,access::read,access::dir)){ delete fld; throw AccessException(); } } return fld; } FileLister* User::list(const Path&path) { User::Stat buf; if(!stat(path,buf)) return new FileListerNone(); if(buf.is_dir()){ return listdir(path); } return list_one(path); } bool User::rename(const Path&from,const Path&to) { if(!may_delete(from) || !may_create(to)) throw AccessException(); return ::rename(get_path(from).c_str(),get_path(to).c_str()) != -1; } bool User::may_stat(const Path&path) { Path parent(path); if(!parent.empty()) parent.pop_back(); return may_listdir(parent); } bool User::authenticate(const std::string&username, const std::string&password, const Conf&usersdb) { if(!verify_password(username,password,usersdb)) return false; if(!_conf.book_increment("logins")){ throw LimitException(); } _name = username; if(!_conf.exists(XferLimit::Direction::to_string(XferLimit::Direction::download) + "_bytes")) _accounting_download = false; if(!_conf.exists(XferLimit::Direction::to_string(XferLimit::Direction::upload) + "_bytes")) _accounting_upload = false; _authenticated = true; return true; } void User::deauthenticate() { if(_authenticated){ _authenticated = false; _conf.book_decrement("logins",1); } } bool User::verify_password(const std::string&username, const std::string&password, const Conf&usersdb) { using std::isalnum; // damn gcc-2.95.2 vs glibc // verify username is not dodgy for(std::string::const_iterator i = username.begin(); i != username.end(); ++i){ if(!isalnum(*i) && *i != '_' && *i != '-') return false; // and let's make double extra sure in case some clown sets a locale if(*i == '.' || *i == '/') return false; } if(username.empty()) return false; if(username.size() >= max_username_length) return false; if(!usersdb.exists(username)) return false; try{ _conf = Conf(usersdb,username); bool any_password_ok = false; _conf.get("any_password_ok",any_password_ok); if(any_password_ok) return true; std::string real_password; if(_conf.exists("password_plain")) { _conf.get_line("password_plain",real_password); // have to use strcmp as one of these may not be nul-terminated if(!std::strcmp(real_password.c_str(),password.c_str())) return true; return false; } _conf.get_line("password",real_password); char*c=crypt(password.c_str(),real_password.c_str()); if(!std::strcmp(c,real_password.c_str())) return true; return false; }catch(std::exception&e){ warnx("error trying to authenticate user: %s",e.what()); } return false; } bool User::check_access(const Path&path,access::type type,access::node_type node_type) { Stat buf; if(!buf.stat(get_path(path))) return false; return check_access(buf,type,node_type); } bool User::check_access(const Stat&buf,access::type type,access::node_type node_type){ if(type == access::read){ if(!buf.may_read()) return false; } if(type == access::write){ if(!buf.may_write()) return false; } if(node_type == access::file){ if(!buf.is_file()) return false; } if(node_type == access::dir){ if(!buf.is_dir()) return false; } return true; } bool User::may_listdir(const Path&path) { return access_dir(path,access::read); } bool User::may_chdir(const Path&path) { return access_dir(path,access::read); } bool User::may_readfile(const Path&path) { return access_file(path,access::read); } bool User::may_writefile(const Path&path) { if(exists(path)){ return access_file(path,access::write); } else { return may_createfile(path); } } bool User::may_create(const Path&path) { if(path.empty()) return false; Path p(path); p.pop_back(); return access_dir(p,access::write); } bool User::stat(const Path&path,Stat&buf) { if(!may_stat(path)) throw AccessException(); return buf.stat(get_path(path)); } std::string User::get_path(const Path&path) { return get_root() + "/" + path.str(); } bool User::unlink(const Path&path) { if(!may_deletefile(path)) throw AccessException(); return !::unlink(get_path(path).c_str()); } bool User::may_delete(const Path&path) { Path p(path); if(!check_access(p,access::write,access::any)) return false; p.pop_back(); return access_dir(p,access::write); } bool User::mkdir(const Path&path) { if(!may_createdir(path)) throw AccessException(); return !::mkdir(get_path(path).c_str(),0777); } bool User::rmdir(const Path&path) { if(!may_deletedir(path)) throw AccessException(); return !::rmdir(get_path(path).c_str()); } std::string User::message_login() { std::string welcome; _conf.get_if_exists("msg_welcome",welcome); return message_limits() + welcome; } void User::do_print_limit(std::ostream&limits,XferLimit::Direction::type dir) { off_t max=0, current=0; max = xfer_limit(dir); if(!max || (dir == XferLimit::Direction::download && !_accounting_download) || (dir == XferLimit::Direction::upload && !_accounting_upload)) limits << "There is no " << XferLimit::Direction::to_string(dir) << " limit."; else { limits << "The " << XferLimit::Direction::to_string(dir) << " limit was " << max << " bytes."; } try{ current = xfer_total(dir); // limits << " Already " << current << " bytes have been " << XferLimit::Direction::to_string(dir) << "ed."; if(max){ if(current >= max){ limits << " You may not " << XferLimit::Direction::to_string(dir) << " anything."; } else { limits << " You may now " << XferLimit::Direction::to_string(dir) << " " << max - current << " bytes."; } } }catch(ConfException&){ } limits << '\n'; } std::string User::message_limits() { std::ostringstream limits; do_print_limit(limits,XferLimit::Direction::download); ratio_t rat = upload_ratio(); if(rat && _accounting_upload) limits << "For every byte you upload you may download " << rat << " more bytes.\n"; do_print_limit(limits,XferLimit::Direction::upload); { int max=0,cur=0; _conf.get_if_exists("logins_max",max); _conf.get_atomically_if_exists("logins",cur); limits << "There are " << cur << " users in your class logged in."; if(max) { limits << " The limit is " << max << " logins."; } limits << '\n'; } return limits.str(); } std::string User::message_directory(const Path&path) { std::string ret; try{ Path index(path); index.push_back(".message"); int fd=open_fd(index,O_RDONLY); char buf[8000]; std::FILE*stream=fdopen(fd,"r"); size_t s=fread(buf,1,sizeof(buf)-1,stream); if(ferror(stream)) warnx("error reading directory index \"%s\"",get_path(index).c_str()); fclose(stream); buf[s] = 0; ret = buf; } catch(...){ } return ret; } teepeedee-0.3.0/src/serverhttp.cc0000664000175000017500000000041607663537155012450 #include "serverhttp.hh" #include "httpcontrol.hh" #include "serverregistration.hh" static ServerRegistration registration("http",ServerHTTP::factory,"HTTP web server"); IOContext* ServerHTTP::new_iocontext() { return new HTTPControl(config(),stream_container()); } teepeedee-0.3.0/src/server.cc0000664000175000017500000000103410006060067011517 #include #include #include #include "server.hh" Stream* Server::read_config() { uint32_t inaddr = INADDR_ANY; int port; if(_conf.exists("bind_addr")) _conf.get_ipv4_addr("bind_addr",inaddr); _conf.get("bind_port",port); sockaddr_in name; memset(&name,0,sizeof name); // for NetBSD 1.6 name.sin_family = AF_INET; name.sin_addr.s_addr = inaddr; name.sin_port = htons(port); Stream* s = Stream::listen((const sockaddr*)&name,sizeof name); s->consumer(this); return s; } teepeedee-0.3.0/src/httpcontrol.cc0000664000175000017500000003463510006060067012606 #include #include #include #include #include #include #include #include #include #include #include #include #include #include "xferlimituser.hh" #include "httpcontrol.hh" #include "httplist.hh" HTTPControl::HTTPControl(const Conf&c,StreamContainer&s,const std::string&proto): Control(c,s), _protocol(proto), _xfer(0) { reset_req(); config().get_timeout("timeout_prelogin",*this); } bool HTTPControl::persistant() { if(closing()) return false; if(!strcasecmp(_req_headers["connection"].c_str(),"keep-alive")) return true; if(_req_ver_major != 1 || _req_ver_minor != 1) return false; if(!strcasecmp(_req_headers["connection"].c_str(),"close")) return false; return true; } static std::string base64_decode(const std::string&coded) { // Base64 is in RFC 1521 /* python code to generate table import base64 table = [-1] * 128 for i in range(64): table[ord(base64.encodestring(chr(0)+chr(0)+chr(i))[3])] = i table[ord('=')] = 0 for i in range(128): if i & 7 == 0: print "\n\t", print "%2d,"%table[i], */ static const signed char xlate[] = { -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, 62, -1, -1, -1, 63, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, -1, -1, -1, 0, -1, -1, -1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, -1, -1, -1, -1, -1, -1, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, -1, -1, -1, -1, -1 }; std::string ret; signed char quad[4]; const char*pos = coded.c_str(); while(*pos){ for(int i = 0; i < 4; ++i){ if(!*pos) return std::string(); quad[i] = xlate[*pos++ & 127]; if(quad[i] == (signed char)-1) return std::string(); } for(int i = 0; i <3; ++i) ret += (quad[i] << (2*i+2)) | (quad[i+1] >> (4-2*i)); } return ret; } bool HTTPControl::try_authenticate(User&user) { using std::isspace; // damn gcc-2.95.2 vs glibc std::string auth = _req_headers["authorization"]; if(strncasecmp(auth.c_str(),"Basic",5)) return false; const char*base64 = auth.c_str()+5; if(!isspace(*base64)) return false; while(isspace(*++base64)); std::string unamepasswd = base64_decode(base64); for(unsigned i = 0;unamepasswd.c_str()[i];++i) if(unamepasswd[i]==':'){ std::string username = unamepasswd.substr(0,i); if(!user_login(user,username,unamepasswd.substr(i+1))) throw User::AccessException(); return true; } return false; } void HTTPControl::authenticate(User&user) { if(try_authenticate(user)) { config().get_timeout("timeout_postlogin",*this); return; } if(!user_login_default(user)) throw User::AccessException(); config().get_timeout("timeout_postlogin",*this); } void HTTPControl::parse_req_line(char*buf,size_t len) { using std::tolower; // for NetBSD 1.6 char*end = buf+len; char*start; for(start=buf;start= start && isspace(*last); --last) *last = 0; std::string val = start; finished_header_line(name,val); } void HTTPControl::finished_req() { #define method(name) { #name, & HTTPControl::cmd_ ## name } struct cmd { typedef void (HTTPControl::*function_type)(); const char*name; function_type function; }; static const cmd cmd_table[] = { method(put), method(options), method(delete), method(trace), method(get), method(head), { 0 , 0 } }; #undef method try{ for(const cmd*i=cmd_table;i->name;++i) if(_req_method == i->name) { (this->*i->function)(); finished_queuing_response(); return; } } catch (const User::AccessException&){ error_response("401","I'm sorry, I can't let you do that"); return; } catch (const LimitException&){ error_response("503","Server overloaded"); return; } catch (const ConfException&ce){ error_response("500","Server misconfigured: " + std::string(ce.what())); return; } error_response("501","Server doesn't understand"); } void HTTPControl::error_response(const std::string& code,const std::string& str) { status_line(code,str); response_header_line("Content-Type","text/html"); std::string err; if(config().exists("error-"+code)) config().get("error-"+code,err); else err = std::string("")+str+"\n" "

"+str+"

\n" "

Error "+code+"

\n"; response_header_line("Content-Length",err.length()); response_header_end(); add_response(err); finished_queuing_response(); } void HTTPControl::response_header_line(const std::string& name, unsigned long value) { std::ostringstream s; s << value; response_header_line(name,s.str()); } void HTTPControl::finished_reading(char*buf,size_t len) { if(!has_req_line()) { parse_req_line(buf,len); return; } if(len == 0) { finished_req(); return; } parse_header(buf,len); } void HTTPControl::response_header_end() { if(!persistant()) response_header_line("Connection","close"); else { if(_req_ver_major == 1&&_req_ver_minor ==0) response_header_line("Connection","Keep-Alive"); } std::string realm = "teepeedee"; if(config().exists("realm")){ config().get_line("realm",realm); } response_header_line("WWW-Authenticate","Basic realm=\"" + realm + "\""); add_response("\r\n"); } void HTTPControl::xfer_done(IOContextControlled*xfer,bool successful) { if(xfer != _xfer){ warnx("internal error in HTTPControl::xfer_done"); return; } _xfer = 0; } void HTTPControl::start_xfer(IOContextControlled*xfer,Stream*st) { _xfer = xfer; if(st) stream_container().add(st); config().get_timeout("timeout_xfer",*xfer); } Path HTTPControl::get_uri_path()const { return Path(_req_uri.path()); } std::string HTTPControl::mimetype(const Path&path) { if(path.empty()) return std::string(); std::string last=*path.rbegin(); std::string::size_type pos = last.rfind('.'); if(pos == std::string::npos) return std::string(); std::string ext = last.substr(pos+1); if(ext == "html") return "text/html"; return std::string(); } void HTTPControl::start_file_xfer(Stream*fd, const std::string&filename, User&user, XferLimit::Direction::type dir) { IOContextXfer*ioc; try{ ioc = new IOContextXfer(this); } catch (...){ delete fd; throw; } fd->consumer(ioc); if(dir == XferLimit::Direction::download) ioc->stream_in(fd); else ioc->stream_out(fd); try { ioc->limit(new XferLimitUser(user,dir,remotename(),_protocol, filename)); } catch (...){ fd->release_consumer(); delete ioc; delete fd; throw; } start_xfer(ioc,fd); } void HTTPControl::do_get_file(const Path&file,User::Stat&buf, User&user,bool actually_send_data) { Stream*fd; if(!(fd = user.open(file,O_RDONLY))){ error_response("404","Unable to open file"); return; } status_line("200","File ready to send"); std::string mt = mimetype(file); if(!mt.empty()) response_header_line("Content-Type",mt); response_header_line("Content-Length",buf.size()); response_header_end(); if(actually_send_data){ start_file_xfer(fd,file.str(),user,XferLimit::Direction::download); } else if(fd) { delete(fd); } } void HTTPControl::moved_to_response(const std::string& path) { std::string servername = _req_headers["host"]; if(servername.empty()) servername = _req_uri.authority(); if(config().exists("canonical_server_name")) config().get_line("canonical_server_name",servername); if(servername.empty()){ error_response("500","Don't know what my canonical server name is"); return; } std::string replacement = _protocol + "://" + servername + "/" + path; std::string body = std::string("To pastures new\n" "

Moved far away

\n" "

Now at " + replacement + ".\n"); status_line("301","Totally moved far away"); response_header_line("Location",replacement); response_header_line("Content-Length",body.size()); response_header_line("Content-Type","text/html"); response_header_end(); add_response(body); finished_queuing_response(); } void HTTPControl::do_get_dirlisting(const Path&dir,User&user,bool actually_send_data) { FileLister*fl = user.list(dir); status_line("200","File ready to send"); response_header_line("Content-Type","text/html"); close_after_output(); //no content length so must close response_header_end(); if(actually_send_data){ IOContextControlled*ioc; try{ ioc = new HTTPList(this,fl,user); } catch (...){ delete fl; throw; } start_xfer(ioc); } } void HTTPControl::do_cmd_get(bool actually_send_data) { User user; authenticate(user); User::Stat buf; Path p = get_uri_path(); if(!user.stat(p,buf)){ error_response("404","No file by that name"); return; } if(buf.is_dir()) { if(!_req_uri_is_dir) { moved_to_response(p.str() + "/"); return; } bool no_index_html = false; config().get("no_index_html",no_index_html); if(!no_index_html){ Path index(p); index.push_back("index.html"); if(user.stat(index,buf)) { do_get_file(index,buf,user,actually_send_data); return; } } bool no_dir_listing = false; config().get("no_dir_listing",no_dir_listing); if(!no_dir_listing){ do_get_dirlisting(p,user,actually_send_data); return; } else { error_response("403","Directory listing forbidden"); return; } } do_get_file(p,buf,user,actually_send_data); } void HTTPControl::cmd_put() { User user; authenticate(user); Path p = get_uri_path(); if(has_req_header("content-encoding") || has_req_header("content-range") ){ error_response("501","Content-* headers not implemented for PUT"); return; } Stream*fd = user.open(p,O_WRONLY|O_CREAT); if(!fd){ error_response("404","Cannot create file"); return; } start_file_xfer(fd,p.str(),user,XferLimit::Direction::upload); // XXX should check if being created and return 201 if so status_line("204","File being written"); response_header_end(); } void HTTPControl::cmd_options() { if(has_req_body()){ // hey this is not even def'd in the 1.1 spec (RFC2616) error_response("501","OPTIONS message body not implemented"); return; } if(_req_uri.str() == "*") { status_line("200","OPTIONS * happily received"); response_header_line("Allow","GET, HEAD, PUT, DELETE"); response_header_end(); return; } User user; authenticate(user); Path p = get_uri_path(); status_line("200","OPTIONS happily received"); if(user.may_readfile(p)) response_header_line("Allow","GET, HEAD"); if(user.may_writefile(p)) response_header_line("Allow","PUT"); if(user.may_deletefile(p)) response_header_line("Allow","DELETE"); response_header_end(); } void HTTPControl::cmd_delete() { User user; authenticate(user); Path p = get_uri_path(); if(!user.unlink(p)){ error_response("404","File to delete absent"); return; } status_line("204","File successfully destroyed!"); response_header_end(); return; } void HTTPControl::cmd_trace() { error_response("501","TRACE not implemented as it is too easy to DoS the server"); } void HTTPControl::read_in_xfer(Stream&stream,size_t max) { made_progress(); try{ _xfer->read(stream,max); } catch (IOContext::Destroy&d){ delete_xfer(d.target()); } if(!_xfer) read_in(stream,max); } void HTTPControl::read_in(Stream&stream,size_t max) { if(_xfer) { read_in_xfer(stream,max); return; } super::read_in(stream,max); if(_xfer) read_in_xfer(stream,max); } void HTTPControl::write_out_xfer(Stream&stream,size_t max) { made_progress(); try{ _xfer->write(stream,max); } catch (IOContext::Destroy&d){ delete_xfer(d.target()); } if(!_xfer) return write_out(stream,max); } void HTTPControl::write_out(Stream&stream,size_t max) { if(_xfer && !response_ready()){ write_out_xfer(stream,max); return; } super::write_out(stream,max); if(_xfer && !response_ready()){ write_out_xfer(stream,max); } } bool HTTPControl::want_write(Stream&stream) { if(!_xfer)return super::want_write(stream); bool ret; try{ ret = _xfer->want_write(stream); } catch(IOContext::Destroy&d){ delete_xfer(d.target()); } if(!_xfer) return super::want_write(stream); return ret; } bool HTTPControl::want_read(Stream&stream) { if(!_xfer)return super::want_read(stream); bool ret; try{ ret = _xfer->want_read(stream); } catch (IOContext::Destroy&d){ delete_xfer(d.target()); } if(!_xfer) return super::want_read(stream); return ret; } teepeedee-0.3.0/src/httplist.cc0000664000175000017500000000257207662033373012112 #include #include #include #include "httplist.hh" HTTPList::HTTPList(IOController*fc,FileLister*fl,const User&u) : IOContextList(fc,fl), _finished(false), _user(u) { Path p(virtual_path()); if(!p.empty()) p.pop_back(); std::string name = p.str(); std::string head = "Directory listing of " + name + "/\n" "\n"; std::string welcome = _user.message_login(); if(!welcome.empty()) head += "

" + welcome + "
\n"; head += "

Directory listing of " + name + "/

\n"; welcome = _user.message_directory(p); if(!welcome.empty()) head += "
" + welcome + "
\n"; head += "
    \n"; set_entry(head); } void HTTPList::prepare_entry() { URI uri; uri.set_path(virtual_path()); User::Stat buf; std::string name = entry_name(); std::string extra_info; try { if(_user.stat(virtual_path(),buf)){ if(buf.is_dir()) name += "/"; else { std::ostringstream s; s << " (" << buf.size() << " bytes)"; extra_info = s.str(); } } } catch (const User::AccessException&){ } set_entry("
  • " + name + "" + extra_info + "
    • \n"); } void HTTPList::finished_listing() { if(!_finished){ set_entry("
"); _finished = true; } else { IOContextList::finished_listing(); } } teepeedee-0.3.0/src/control.cc0000664000175000017500000000152210006060067011673 #include #include "control.hh" #include "user.hh" void Control::increment() { if(!config().book_increment("unauthenticated_connections")) throw LimitException(); } void Control::decrement() { if(!_authenticated) { config().book_decrement("unauthenticated_connections"); _authenticated = true; } } bool Control::user_login_default(User&user,const std::string&password) { return user_login(user,"default-user",password); } bool Control::user_login(User&user,const std::string&username,const std::string&password) { try{ Conf users(config(),"users"); if(user.authenticate(username,password,users)){ decrement(); return true; } } catch(LimitException&){ throw; } catch (std::exception&e){ warnx("error for user trying to login: %s",e.what()); } return false; } teepeedee-0.3.0/src/serverhttps.cc0000664000175000017500000000050007663537155012625 #ifdef HAVE_OPENSSL #include "serverhttps.hh" #include "serverregistration.hh" #include "httpcontrol.hh" static ServerRegistration registration("https",ServerHTTPS::factory,"Secure HTTPS web server"); IOContext* ServerHTTPS::new_iocontext() { return new HTTPControl(config(),stream_container(),"https"); } #endif teepeedee-0.3.0/src/serverftp.cc0000664000175000017500000000043607662033373012254 #include "serverftp.hh" #include "ftpcontrol.hh" #include "serverregistration.hh" static ServerRegistration registration("ftp",ServerFTP::factory,"FTP file server"); IOContext* ServerFTP::new_iocontext() { return new FTPControl(config(),stream_container(),_ssl_available?this:0); } teepeedee-0.3.0/src/ftpcontrol.cc0000664000175000017500000004645410006060067012422 #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "xferlimituser.hh" #include "ftpcontrol.hh" #include "ftpdatalistener.hh" #include "ftplist.hh" #include "ftplistlong.hh" #include "ftplistmlsd.hh" #include "ftpmlstprinter.hh" #define cmd(name,desc) { #name, & FTPControl::cmd_ ## name , desc } const FTPControl::ftp_cmd FTPControl::ftp_cmd_table[] = { cmd(user," : initate authentication as username, follow with pass"), cmd(pass," : authenticate as previously given username"), cmd(help," []: get help (possibly about a command) from the server"), cmd(rein,": cancel authentication"), cmd(quit,": terminate the session"), cmd(noop,": do nothing"), cmd(syst,": get information about the system type"), cmd(type," : change RFC959 transfer type"), cmd(mode," : change RFC959 transfer mode"), cmd(stru," : change RFC959 transfer structure"), cmd(pasv,": enter passive mode (server listens for data connection)"), cmd(pwd,": print current directory"), cmd(abor,": abort transfer in progress"), cmd(cdup,": move up to the parent directory"), cmd(nlst," []: list filenames in current or specified directory"), cmd(list," []: list information about files or directories"), cmd(rnfr," : prepare to rename this file, follow with rnto"), cmd(rnto," : rename file specified with rnfr to this one"), cmd(cwd," : change to directory"), cmd(dele," : delete file"), cmd(port,": enter active mode - server connects to client for data connection"), cmd(retr," : retrieve a file from the server"), cmd(stor," : store a file on the server"), cmd(rest," : start next transfer a certain offset into the file"), cmd(mkd, ": create directory"), cmd(rmd, ": remove empty directory"), cmd(stat, ": inform whether a transfer is taking place"), cmd(mlst," : machine readable directory listing of filename"), cmd(mlsd," []: machine readable directory listing of directory"), cmd(feat,": list optional features supported (as in draft-ietf-ftpext-mlst-16.txt)"), cmd(mdtm," : list time file was modified"), cmd(size," : list size of file"), cmd(eprt,"
: extended active mode"), cmd(epsv," |ALL: extended passive mode"), cmd(auth," TLS: turn the session into an SSL session"), cmd(pbsz," 0: comply with RFC 2228 before issuing PROT"), {0,0,0} }; #undef cmd FTPControl::FTPControl(const Conf&conf,StreamContainer&sc,SSLStreamFactory*ssf) : Control(conf,sc), _data_listener(0), _data_xfer(0), _ssl_factory(ssf), _restart_pos(0), _quitting(false), _turning_into_ssl(false), _unencrypted_stream(0) { std::string greet = "Service ready for new user."; config().get_if_exists("greeting",greet); config().get_timeout("timeout_prelogin",*this); make_response_multiline("220",greet); } void FTPControl::remote_stream(const Stream&stream) { try{ stream.getpeername(_port_addr); _port_addr.sin_port = htons(20); stream.getsockname(_local_addr); } catch (const std::exception&e){ warnx("unable to get port or pasv details: %s",e.what()); make_error("Server not on network"); } super::remote_stream(stream); } void FTPControl::xfer_done(IOContextControlled*xfer,bool success) { if(xfer == _data_xfer) { _data_xfer = 0; if(_data_listener&&_data_listener->has_data()){ _data_listener->release_data(); _data_listener = 0; } if(_quitting) close_after_output(); if(success) make_response("226","Transfer complete"); else make_response("426","Transfer closed due to error: timeout?"); config().get_timeout("timeout_postlogin",*this); } else if (xfer == _data_listener) { _data_listener = 0; } } void FTPControl::start_xfer(IOContextControlled*xfer,Stream*fd) { if(passive()){ _data_listener->set_data(xfer); } else { sockaddr_in sai(_local_addr); sai.sin_port = htons(ntohs(sai.sin_port)-1); Stream*s = Stream::connect((const sockaddr*)&_port_addr,sizeof _port_addr,(const sockaddr*)&sai,sizeof sai); s->consumer(xfer); stream_container().add(s); } _data_xfer = xfer; if(fd) stream_container().add(fd); config().get_timeout("timeout_xfer",*xfer); set_timeout_interval(0); make_response("150","The data is in the post"); } static int get_port_desc_byte(const char*&s) { char*next; int ret = strtoul(s,&next,10); if(s == next) s = 0; else s = next; if(ret != (ret & 0xff)) s = 0; return ret; } void FTPControl::cmd_dele(const std::string&argument) { assert_auth(); if(!_user.unlink(Path(_path,argument))){ make_response("450","It's invincible!"); }else make_response("250","Destruction complete"); } void FTPControl::cmd_rest(const std::string&argument) { assert_auth(); const char*s = argument.c_str(); char*r; _restart_pos = strtoull(s,&r,10); if(r == s){ make_response("501","Improve your figure"); }else make_response("350","Your wish is my command"); } bool FTPControl::restart(Stream*fd) { off_t pos = take_restart_pos(); if(pos){ try{ fd->seek_from_start(pos); } catch (...){ make_response("553","Cannot find the rest position"); return false; } } return true; } void FTPControl::start_file_xfer(const Path&path, XferLimit::Direction::type dir) { Stream*fd; try{ fd = _user.open(path,dir == XferLimit::Direction::upload ? O_WRONLY|O_CREAT : O_RDONLY); } catch (std::exception&e){ make_response("550","File not there"); return; } IOContextXfer*ioc; if(!restart(fd)){ delete fd; return; } try{ ioc = new IOContextXfer(this); } catch (...){ delete fd; throw; } fd->consumer(ioc); if(dir == XferLimit::Direction::download) ioc->stream_in(fd); else ioc->stream_out(fd); try { ioc->limit(new XferLimitUser(_user,dir,remotename(),"ftp", path.str())); } catch (...){ fd->release_consumer(); delete ioc; delete fd; throw; } start_xfer(ioc,fd); } void FTPControl::cmd_retr(const std::string&argument) { assert_auth(); assert_no_xfer(); start_file_xfer(Path(_path,argument),XferLimit::Direction::download); } void FTPControl::cmd_stor(const std::string&argument){ assert_auth(); assert_no_xfer(); start_file_xfer(Path(_path,argument),XferLimit::Direction::upload); } bool FTPControl::active_on() { bool cancel; config().get("no_port_mode",cancel); if(cancel || !passive_off()){ make_response("502","Hey! I'm the passive partner here"); return false; } return true; } void FTPControl::cmd_port(const std::string&argument) { assert_auth(); uint32_t haddr=0; uint16_t hport=0; const char*s=argument.c_str(); for(int i=3;i>=0;--i){ haddr |= get_port_desc_byte(s) << (i*8); if(!s || *s++ != ','){ goto syn_error; } } hport |= get_port_desc_byte(s) << 8; if(!s || *s++ != ','){ goto syn_error; } hport |= get_port_desc_byte(s); if(!s)goto syn_error; if(!active_on()){ return; } memset(&_port_addr,0,sizeof _port_addr); _port_addr.sin_family = AF_INET; _port_addr.sin_addr.s_addr = htonl(haddr); _port_addr.sin_port = htons(hport); make_response("200","Port change ok, captain"); return; syn_error: make_response("501","Bad port description"); } void FTPControl::do_cmd_list(const std::string&argument,bool detailed) { // Messy hack central. None of this is spec'd in the RFC 959 but clients expect it assert_auth(); assert_no_xfer(); std::string arg = argument; FileLister*fl; // ignore -options from stupid clients [like gftp] who try to // send us flags to ls(1) while(!arg.empty() && arg[0] == '-') { std::string::size_type s = arg.find(' '); if(s != std::string::npos) arg = arg.substr(s+1); else arg = std::string(); } if(arg.find_first_of("*?")!=std::string::npos) fl = new FileListerGlob(arg,_user.list(Path(_path))); else fl = _user.list(Path(_path,arg)); IOContextControlled*fdl; try{ fdl = detailed ? new FTPListLong(this,_user,fl) : new FTPList(this,fl); } catch (...){ delete fl; throw; } start_xfer(fdl); return; } void FTPControl::cmd_abor(const std::string&argument) { assert_auth(); if(xfer_pending()){ make_response("426","Terminating due to abort"); IOContextControlled*dx = _data_xfer; dx->completed(); throw Destroy(dx); } else make_response("226","Nothing to abort"); return; } void FTPControl::cmd_feat(const std::string&argument) {// defined in draft-ietf-ftpext-mlst-16.txt if(!argument.empty()){ make_response("504","FEAT not implemented with argument"); return; } make_response("211-","The following features are supported\r\n" " AUTH TLS\r\n" " PBSZ\r\n" " MDTM\r\n" " SIZE\r\n" " MLST Type*;Size*;Modify*;Perm*\r\n" " REST STREAM\r\n" " TVFS" ); make_response("211","That is all"); } void FTPControl::cmd_mdtm(const std::string&argument) { assert_auth(); User::Stat buf; Path p(_path,argument); if(!_user.stat(p,buf)){ make_response("550","Path does not exist"); return; } std::string mtime = FTPMlstPrinter::mtime(buf.mtime()); make_response("213",mtime); } void FTPControl::cmd_size(const std::string&argument) { assert_auth(); User::Stat buf; Path p(_path,argument); if(!_user.stat(p,buf)){ make_response("550","File does not exist"); return; } if(buf.is_dir()) { make_response("550","Pathname is directory"); return; } std::ostringstream s; s << buf.size(); make_response("213",s.str()); } void FTPControl::cmd_mlst(const std::string&argument) { assert_auth(); User::Stat buf; Path p(_path,argument); if(!_user.stat(p,buf)){ make_response("550","File does not exist"); return; } FTPMlstPrinter mlst(_user); make_response("250-","MLST listing\r\n " + mlst.line(p) ); make_response("250","MLST finished"); } void FTPControl::FTPControl::cmd_mlsd(const std::string&argument) { assert_auth(); assert_no_xfer(); FileLister*fl = _user.list(Path(_path,argument)); IOContextControlled*fdl; FTPMlstPrinter mlst(_user); try{ fdl = new FTPListMlsd(this,fl,mlst); } catch (...){ delete fl; throw; } start_xfer(fdl); } void FTPControl::cmd_help(const std::string&argument) { std::string help; if(argument.empty()) help = "Commands"; else help = "Help for command " + argument; for(const ftp_cmd*i=ftp_cmd_table;i->name;++i) if(argument.empty() || argument == i->name) help += std::string("\r\n ") + i->name + std::string(i->desc); make_response("214-",help); make_response("214","No more help available"); } void FTPControl::cmd_cwd(const std::string&argument) { assert_auth(); Path p(_path,argument); if(!_user.may_chdir(p)){ make_response("550","You cannot or may not chdir there"); return; } _path = p; make_response_multiline("250","Directory changed magnificently\n"+_user.message_directory(_path)); return; } void FTPControl::make_response(const std::string&code,const std::string&str,char connect) { std::string total = code + connect + str + "\r\n"; add_response(total); } void FTPControl::make_response_multiline(const std::string&code,const std::string&multiline) { std::string::size_type size = multiline.size(); std::string::size_type start,i; for(start=0,i=0;idetach(); _data_xfer = 0; } passive_off(); } void FTPControl::finished_reading(char*buf,size_t len) { using std::isspace; // damn gcc-2.95.2 on debian using std::iscntrl; // damn gcc-2.95.2 on debian using std::tolower; // for NetBSD 1.6 std::string name(buf,len); // yes guaranteed nul terminated std::string argument; for(size_t i = 0; i < len;++i){ if(isspace(buf[i])){ buf[i] = 0; name = buf; if(++i!=len){ argument = buf + i; } break; } } for(std::string::iterator i=name.begin();i!=name.end();){ if(!isalnum(*i)) // be lazy and ignore control sequences i=name.erase(i); else{ *i = tolower(*i); ++i; } } try{ command(name,argument); return; } catch (UnixException&e){ warnx("internal error: %s",e.what()); } make_error("Server too confused to process command"); } bool FTPControl::login(const std::string&password) { std::string uname = _username; if(uname.empty()) return false; lose_auth(); bool success; if(uname == "ftp" || uname == "anonymous") success = user_login_default(_user,password); else success = user_login(_user,uname,password); if(success){ config().get_timeout("timeout_postlogin",*this); return true; } return false; } void FTPControl::command(const std::string&cmd,const std::string& argument) { try{ for(const ftp_cmd*i=ftp_cmd_table;i->name;++i) if(cmd == i->name) { (this->*i->function)(argument); return; } } catch (User::AccessException&){ make_response("550","I'm sorry, I can't let you do that"); return; } catch ( UnauthenticatedException& ) { make_response("530","Who do you think you are?"); return; } catch ( XferPendingException& ){ make_response("451","Cool it, greedy! You already have one transfer on the go"); return; } catch (ConfException&ce){ make_error("Server misconfigured: " + std::string(ce.what())); return; } make_response("502","Come again?"); return; } bool FTPControl::passive_off() { if(passive()){ _data_listener->free(); _data_listener->detach(); _data_listener = 0; } return true; } static std::string comma_dump_addr(const struct sockaddr_in& addr) { std::ostringstream s; uint32_t ad = ntohl(addr.sin_addr.s_addr); uint16_t port = ntohs(addr.sin_port); for(int i = 3;i>=0;--i) s << unsigned(ad >> (i*8) & 0xff) << ','; s << unsigned((port >> 8)&0xff) << ',' << unsigned(port & 0xff); return s.str(); } bool FTPControl::passive_on(bool epsv) { // always reinitialize passive mode as the accept queue created by the // FTPDataListener might have been mangled by the client if(passive()) passive_off(); bool cancel; config().get("no_passive_mode",cancel); if(cancel) return false; int px = 65535,pn = IPPORT_RESERVED; config().get_if_exists("passive_port_min",pn); config().get_if_exists("passive_port_max",px); _data_listener = new FTPDataListener(this); _data_listener->stream_container(&stream_container()); Stream*s; try{ s=Stream::listen_ipv4_range(_local_addr.sin_addr.s_addr,pn,px); s->consumer(_data_listener); } catch (...){ delete _data_listener; _data_listener = 0; warnx("unable to bind passive listener"); return false; } stream_container().add(s); config().get_timeout("timeout_xfer",*_data_listener); sockaddr_in addr; s->getsockname(addr); if(epsv){ std::ostringstream oss; oss << ntohs(addr.sin_port) << "|)"; make_response("229","Entering Extended Passive Mode (|||"+oss.str()); }else make_response("227",std::string("Entering Passive Mode. (")+ comma_dump_addr(addr) +")"); return true; } bool FTPControl::stream_hungup(Stream&stream) { if(passive()) passive_off(); if(xfer_pending()) _data_xfer->detach(); super::stream_hungup(stream); return true; } void FTPControl::cmd_pass(const std::string&argument) { if(_username.empty()){ make_response("503","Who's there?"); return; } try { if(!login(argument)){ make_response("530","You are not everything you claim to be"); } else { make_response_multiline("230",_user.message_login()); } } catch (const LimitException&){ make_response("530","Too many users in this class are logged in, try again later"); } } void FTPControl::cmd_epsv(const std::string&argument) { assert_auth(); if(argument.empty() || !strcasecmp(argument.c_str(),"1")){ passive_on(true); return; } if(!strcasecmp(argument.c_str(),"all")) { make_response("501","RFC 2428 makes proper support for EPSV ALL hasslesome so it isn't suppored"); return; } make_response_proto_not_supported(); } void FTPControl::cmd_eprt(const std::string&argument) { assert_auth(); if(argument.empty()) { make_response("501","Empty extended port argument - time for some sherry?"); return; } if(!active_on()) return; memset(&_port_addr,0,sizeof _port_addr); const char*str=argument.c_str(); char delim = *str++; char prot = *str++; if(prot == 0||prot ==delim){ make_response("501","No protocol specified for port (pass it left)"); return; } switch(prot){ case '1': _port_addr.sin_family = AF_INET; break; default: make_response_proto_not_supported(); return; } if(*str++ != delim){ make_response_proto_not_supported(); } std::string address; while(*str && *str!=delim) address += *str++; if(inet_pton(_port_addr.sin_family,address.c_str(),&_port_addr.sin_addr.s_addr)<=0){ make_response("501","Invalid address, wrong side of town"); return; } if(!*str++){ make_response("501","No port? No cigars? Call this a dinner party?"); return; } char*tail; unsigned long port = strtoul(str,&tail,10); if(tail == str || *tail != delim){ make_response("501","Bad port received (leading to gout)"); return; } _port_addr.sin_port = htons(port); make_response("200","Always happy to see a new port"); } void FTPControl::cmd_auth(const std::string&argument) { if(!strcasecmp(argument.c_str(),"tls") ||!strcasecmp(argument.c_str(),"tls-c")) { if(!_ssl_factory){ make_response("534","Not configured for TLS (no keys?)"); return; } make_response("234","Now happily talking TLS"); _turning_into_ssl = true; return; } make_response("504","Only know about AUTH TLS"); } void FTPControl::read_in(Stream&stream,size_t max) { if(_turning_into_ssl&&!response_ready()){ _turning_into_ssl = false; if(!_unencrypted_stream){ _unencrypted_stream = &stream; } Stream*ns; IOContext*saved = stream.consumer(); stream.release_consumer(); try{ ns=_ssl_factory->new_stream(&stream,stream_container()); } catch (...){ stream.consumer(saved); throw; } ns->consumer(saved); stream_container().add(ns); } else super::read_in(stream,max); } void FTPControl::cmd_pbsz(const std::string&argument) { if(!encrypted()){ make_response("503","Cannot protect an unencrypted stream"); return; } if(argument != "0"){ make_response("501","PBSZ=0"); return; } make_response("200","RFC 2228 - what a waste of time"); } teepeedee-0.3.0/src/ftpdatalistener.cc0000664000175000017500000000056307662033373013426 #include #include #include #include #include #include "ftpdatalistener.hh" void FTPDataListener::set_data(IOContext*fdc) { _data = fdc; } IOContext* FTPDataListener::new_iocontext() { if(!has_data()){ delete_this(); return 0; } IOContext*tmp = _data; release_data(); return tmp; } teepeedee-0.3.0/src/ftplistlong.cc0000664000175000017500000000231407600752541012573 #include #include #include #include #include #include #include #include "ftplistlong.hh" static std::string ftp_date(std::time_t mtime) { std::time_t now = std::time(0); struct tm tmbuf; struct tm *split_mtime = localtime_r(&mtime,&tmbuf); const char*date_format = "%b %d %H:%M"; char datebuf[64]; if (mtime > now || (now - mtime) > 60*60*12*365) // in the future or more than 6 months old date_format = "%b %d %Y"; int ret = strftime(datebuf,sizeof datebuf,date_format,split_mtime); datebuf[sizeof(datebuf)-1]=0; if(ret == 0) { warn("strftime"); return "Jan 1 00:00"; } return datebuf; } void FTPListLong::prepare_entry() { User::Stat buf; std::ostringstream s; while(!_user.stat(virtual_path(),buf)){ skip_entry(); if(no_entries_left()) return; } // s << "---------- 0 unstatable deleted 0 Jan 1 00:00 "; s << buf.rwx_string() << ' '; s << std::setw(4) << buf.nlink() << ' '; s << buf.username() << ' '; s << buf.groupname() << ' '; s << std::setw(12) << buf.size() << ' '; s << ftp_date(buf.mtime()) << ' '; s << entry_name() << "\r\n"; set_entry(s.str()); } teepeedee-0.3.0/src/teepeedee-share0000664000175000017500000000422610006060067012660 #! /usr/bin/python import tempfile import os import time import sys from optparse import OptionParser def write_file(filename, contents): fp = file(filename,"w") fp.write(contents) fp.close() def write_config(dir,sharedir,proto_ports): for proto in proto_ports.keys(): base = dir + "/" + proto + "/MyServer" os.makedirs(base,0700) print proto,"protocol server config in",base write_file(base + "/bind_port",str(proto_ports[proto])) print "--- listening on port",proto_ports[proto],"see",base+"/bind_port" write_file(base + "/bind_addr","0.0.0.0\n") print "--- listening on all interfaces, see",base + "/bind_addr" write_file(base + "/greeting","Thank you for using teepeedee\n") os.mkdir(base + "/users") userbase = base + "/users/default-user" os.mkdir(userbase) write_file(userbase + "/any_password_ok","") write_file(userbase + "/msg_welcome","Welcome to the teepeedee share created on " + time.asctime() + "\n") os.symlink(sharedir,userbase + "/homedir") proto_ports = { "http": 20180, "ftp": 20121 } p = OptionParser() p.add_option("-c","--configdir",dest="configdir", help="write configuration into DIR (default temp. directory)", metavar="DIR") p.add_option("-d","--sharedir",dest="sharedir",default=os.getcwd(), help="share directory DIR (default current directory)", metavar="DIR") p.add_option("-e","--exec",dest="executable",default="teepeedee", help="location of teepeedee executable", metavar="FILE") (options,args) = p.parse_args() dir = options.configdir if not dir: dir = tempfile.mkdtemp("-tpd") write_config(dir,options.sharedir,proto_ports) print print "WARNING" print "WARNING: Write access is enabled for group writable files and directories!" print "WARNING" print print "Now executing" print " ",options.executable,dir try: os.execlp(options.executable,options.executable,dir) except OSError, (no,strerror): print "execlp("+options.executable+"):",strerror sys.exit(1)